Headers & Connectors

SKU: SF-PRT-17252 | Brand: SparkFun

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80, right angle, PTH pins. Add this part to your board to create a handy...

SKU: SF-PRT-16764 | Brand: SparkFun

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs th...

SKU: SF-PRT-15362 | Brand: SparkFun

This is a super small, 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the...

SKU: AF-4174 | Brand: Adafruit

These three Short Female Headers alone are, well, lonely. But pair them with any of our ItsyBitsy boards, and you're in business! These headers are particularly cute and tiny with a body height of just 5.0 mm th...

SKU: AF-3646 | Brand: Adafruit

Precision-machined Swiss-pin female socket headers for a tight, reliable fit. Unlike standard stamped-metal headers, Swiss-pin sockets use machined round contacts that grip the matching Swiss-pin male plugs securely —...

SKU: AF-1126 | Brand: Adafruit

Tin-plated brass sewable snaps in a compact 5 mm diameter, ideal for wearable electronics. Solder one side to a PCB pad and sew the other to your project with conductive thread for a detachable electrical connection. ...

SKU: AF-4079 | Brand: Adafruit

This 2×20 female socket riser header features slightly longer-than-standard pins, adding extra height between your Raspberry Pi and any HAT, Bonnet, or pHAT mounted on top. This additional clearance helps boards clear...

SKU: SF-CAB-14574 | Brand: SparkFun

These 2-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use for t...

SKU: AF-1540 | Brand: Adafruit

Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breadboard, etc. We go through these guys real fast, and thought that given how ...

SKU: AF-1675 | Brand: Adafruit

A 150mm IDC ribbon cable with 10-pin 2×5 socket connectors at 1.27mm (0.05") pitch on both ends. Designed for SWD (Serial Wire Debug) programming and debugging connections commonly found on ARM Cortex development boar...

SKU: AF-2225 | Brand: Adafruit

This is just a standard USB-A jack.  It's a sturdy metal with 4 pins in the back and 2 small mounting tabs that make it easy to use in your next USB projectWe use this USB-A jack for everything, really. With a li...

SKU: AF-2102 | Brand: Adafruit

This 2×5 (10-pin) IDC breadboard helper makes it easy to connect standard 10-pin IDC ribbon cables to a breadboard or Perma-Proto board. The two-piece design consists of a pin-through socket that straddles the centre ...

SKU: DF-FIT0146 | Brand: DFRobot

An 8-pin female header with extra-long legs, designed for stacking Arduino shields. The extended pins pass through to the board below, allowing multiple shields to be stacked on a single Arduino. Pins are spaced at st...

SKU: SF-PRT-14417 | Brand: SparkFun

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system!Additionally, this connector w...

SKU: SF-WRL-09145 | Brand: SparkFun

This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. Documents: Datasheet RF Connector Buying Guide

SKU: SF-SEN-08733 | Brand: SparkFun

Three pin JST connector with red, black, and yellow colors. 5 inch wire outs. This cable comes fully assembled as shown and connects directly to many different Sharp sensors. Quick and easy, this cable will save yo...

SKU: SF-PRT-08534 | Brand: SparkFun

Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you’ll need one of these single port, RJ45 ethernet jacks with built in transformer (magnetics), status LEDs, a...

SKU: SF-PRT-08235 | Brand: SparkFun

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal ...

SKU: AF-2888 | Brand: Adafruit

A BNC (Bayonet Neill–Concelman) male plug with a screw terminal block for solderless connections. Use stranded or solid-core wire and a small screwdriver to create custom wiring jigs for test equipment, video signals,...

SKU: SF-PRT-08084 | Brand: SparkFun

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal ...