GPS & Location Sensors

SKU: SF-GPS-15733 | Brand: SparkFun

The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it ca...

SKU: SF-GPS-15210 | Brand: SparkFun

The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positi...

SKU: SF-GPS-15193 | Brand: SparkFun

The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constella...

SKU: SF-GPS-14414 | Brand: SparkFun

The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chips...

SKU: SF-GPS-15136 | Brand: SparkFun

With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...

SKU: AF-2460 | Brand: Adafruit

An ultra-compact passive GPS antenna measuring just 9 × 9 × 6.5 mm, with a 50 mm uFL cable. Ideal for space-constrained projects where a full-size antenna won't fit. Key Features Tiny Form Factor – Only 9 × 9 × 6.5...

SKU: SF-GPS-13670 | Brand: SparkFun

The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim de...

SKU: SF-BOB-10496 | Brand: SparkFun

This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units. This board breaks out all of the necessary pins to a row of standard 0.1" spaced header to allow for easy b...

SKU: SF-GPS-15005 | Brand: SparkFun

Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK...

SKU: SF-GPS-17722 | Brand: SparkFun

Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accu...

SKU: DF-KIT0198-US | Brand: DFRobot

This dual-module GNSS-RTK kit brings a base station and mobile rover together for high-precision positioning projects. It uses Real-Time Kinematics, where the stationary base station sends correction data to the movin...

SKU: DF-KIT0212 | Brand: DFRobot

Designed for high-accuracy navigation projects, this kit uses Network RTK to deliver 5 cm + 1 ppm centimetre-level positioning across a typical 15-20km operational range. Its onboard 4G module receives RTCM correction...

SKU: DF-KIT0198-EU | Brand: DFRobot

This GNSS-RTK kit is a complete base-and-rover positioning setup for projects that need centimetre-level location data. It uses Real-Time Kinematic correction, with a stationary base station sending RTCM correction da...

SKU: SF-GPS-19390 | Brand: SparkFun

This NEO-D9S breakout is an L-Band satellite correction data receiver designed to feed correction streams to a compatible multi-band, high-precision GNSS receiver such as the u-blox ZED-F9P. With a clear view of the s...

SKU: SF-GPS-29491 | Brand: SparkFun

Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex M...

SKU: SF-GPS-29891 | Brand: SparkFun

Build high-accuracy GNSS projects on a Raspberry Pi with this GNSS Flex pHAT and matched LG290P plus IM19 module. It combines Quectel's quad-band LG290P RTK receiver with the Feyman IM19 IMU for centimetre-level posit...

SKU: SF-GPS-29887 | Brand: SparkFun

Bring high-precision GNSS to a Raspberry Pi with this GNSS Flex pHAT and u-blox ZED-X20P receiver module. It is built for centimetre-level positioning in demanding navigation and control projects such as UAVs, guidanc...

SKU: SF-GPS-29888 | Brand: SparkFun

Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centim...

SKU: SF-GPS-28962 | Brand: SparkFun

This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. Th...

SKU: SF-GPS-29890 | Brand: SparkFun

Add precise position and orientation data to a Raspberry Pi with this GNSS Flex pHAT and LG580P module combination. It is built for advanced navigation projects that need centimetre-level RTK positioning plus real-tim...