GPS & Location Sensors

SKU: SF-GPS-19390 | Brand: SparkFun

This NEO-D9S breakout is an L-Band satellite correction data receiver designed to feed correction streams to a compatible multi-band, high-precision GNSS receiver such as the u-blox ZED-F9P. With a clear view of the s...

SKU: SF-GPS-29891 | Brand: SparkFun

Build high-accuracy GNSS projects on a Raspberry Pi with this GNSS Flex pHAT and matched LG290P plus IM19 module. It combines Quectel's quad-band LG290P RTK receiver with the Feyman IM19 IMU for centimetre-level posit...

SKU: SF-GPS-29887 | Brand: SparkFun

Bring high-precision GNSS to a Raspberry Pi with this GNSS Flex pHAT and u-blox ZED-X20P receiver module. It is built for centimetre-level positioning in demanding navigation and control projects such as UAVs, guidanc...

SKU: SF-GPS-29888 | Brand: SparkFun

Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centim...

SKU: SF-GPS-28962 | Brand: SparkFun

This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. Th...

SKU: SF-GPS-29890 | Brand: SparkFun

Add precise position and orientation data to a Raspberry Pi with this GNSS Flex pHAT and LG580P module combination. It is built for advanced navigation projects that need centimetre-level RTK positioning plus real-tim...

SKU: SF-GPS-29889 | Brand: SparkFun

Add survey-grade positioning to a Raspberry Pi with this GNSS Flex pHAT bundle, combining a Flex pHAT carrier, Septentrio mosaic-X5 RTK GNSS receiver and Feyman IM19 IMU. It is designed for high-precision positioning,...

SKU: SF-GPS-30384 | Brand: SparkFun

Add survey-grade GNSS positioning to a Raspberry Pi while keeping size, weight and power demands low. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 module, built around Septentrio’s compact mosai...

SKU: SF-GPS-29208 | Brand: SparkFun

Built around Septentrio’s mosaic-G5 P3, this compact GNSS RTK breakout is designed for projects that need survey-grade positioning without giving up space or power budget. It offers the same leading performance as the...

SKU: SF-GPS-23288 | Brand: SparkFun

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in ...

SKU: SF-GPS-22693 | Brand: SparkFun

This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...

SKU: SF-GPS-28019 | Brand: SparkFun

This high-precision positioning breakout is built around the Quectel LG580P GNSS module, giving projects centimetre-level RTK positioning plus instantaneous heading when used with two GNSS antennas. Unlike systems tha...

SKU: SF-GPS-30975 | Brand: SparkFun

Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring e...

SKU: SF-WRL-18712 | Brand: SparkFun

Built for field deployments well beyond WiFi and mobile coverage, this compact tracker combines an Iridium 9603N Short Burst Data modem with the Arduino-compatible Artemis module. It can send and receive short satelli...

SKU: SF-GPS-29491 | Brand: SparkFun

Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex M...

SKU: SF-GPS-30546 | Brand: SparkFun

Add survey-grade GNSS and inertial navigation to a Raspberry Pi in a compact pHAT format. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 and IM19 IMU module, pairing Septentrio's compact GNSS rece...

SKU: SF-GPS-18380 | Brand: SparkFun

This field-ready kit is made for centimetre-level global positioning measurements using GNSS RTK. It centres on the RTK Express, a Bluetooth® enabled multi-band GNSS receiver based on the Espressif ESP32 and u-blox ZE...

SKU: SF-KIT-23452 | Brand: SparkFun

Get started with high-precision RTK GNSS and dead reckoning using u-blox's ZED-F9R module. This kit combines a sensor-fusion GPS breakout, a multiband SMA antenna and a USB cable so you have the core hardware needed f...

SKU: SF-GPS-17370 | Brand: SparkFun

This field-ready RTK kit is built for centimetre-level global positioning measurements using GNSS RTK. The RTK Surveyor is a Bluetooth® enabled multi-band GNSS receiver based on the ESP32 from Espressif and the ZED-F9...