Gas & Air Quality Sensors

SKU: DF-SEN0536 | Brand: DFRobot

The Gravity SCD41 Infrared CO2 Sensor provides accurate carbon dioxide, temperature, and humidity measurements in a single compact module. Based on Sensirion's SCD41 sensor, it uses photoacoustic NDIR (non-dispersive ...

SKU: DF-SEN0500 | Brand: DFRobot

This compact multifunctional environmental sensor combines four professional sensor chips into a single breakout board: SHTC3 (temperature and humidity), BMP280 (barometric pressure), VEML7700 (ambient light), and ML8...

SKU: M5-K023 | Brand: Little Bird

The PM2.5 Air Quality Kit combines a PMSA003 laser particulate sensor with an SHT20 temperature and humidity sensor in a single M5Stack-compatible module. It measures ambient particulate concentration, temperature, an...

SKU: PR-PIM355 | Brand: Little Bird

Sense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your micro:bit. Just slot in your micro:bit, then code enviro:bit wit...

SKU: LB-LR0205 | Brand: Little Bird

An alcohol sensor module for Arduino with both digital (TTL) and analog output. It detects alcohol vapour in the 10–1000 PPM range, with analog output voltage increasing proportionally with concentration. The module a...

SKU: DF-SEN0159 | Brand: DFRobot

The Gravity CO2 Gas Sensor uses an MG-811 electrochemical sensing element to detect carbon dioxide concentration in the air. The output voltage decreases as CO2 concentration increases, and an onboard potentiometer le...

SKU: DF-SEN0467 | Brand: DFRobot

This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentra...

SKU: DF-SEN0570 | Brand: DFRobot

Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat...

SKU: DF-SEN0567 | Brand: DFRobot

Fermion: MEMS Ammonia NH3 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...

SKU: KI-5336 | Brand: Kitronik

The Kitronik Smart Air Quality Board provides a complete air monitoring and datalogging solution for the Raspberry Pi Pico. With an onboard BME688 environmental sensor, OLED display, real-time clock support, and Micro...

SKU: DF-SEN0465 | Brand: DFRobot

This is a sensor that detects oxygen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ox...

SKU: DF-SEN0501 | Brand: DFRobot

This multifunctional environmental sensor comprises SHTC3 temperature & humidity sensor, BMP280 barometric pressure sensor, VEML7700 ambient light sensor, and ML8511 UV sensor into one and offers 5 kinds of environmen...

SKU: DF-SEN0470 | Brand: DFRobot

A factory-calibrated electrochemical sulfur dioxide (SO2) sensor with I2C, UART, and analogue output modes. Part of the DFRobot Gravity gas sensor series, this module quickly and accurately measures SO2 concentration ...

SKU: DF-MBT0034 | Brand: DFRobot

The Environment Science Expansion Board V2.0 is a micro:bit add-on designed for STEAM education, integrating 14 environmental sensors and modules onto a single tree-shaped board. Students can measure UV levels, temper...

SKU: DF-SEN0130 | Brand: DFRobot

The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and se...

SKU: PL-1479 | Brand: Pololu

This carrier board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins—ground, power and analog voltage output—that are broken out with a 0.1" spacing, making the boar...

SKU: DF-SEN0134 | Brand: DFRobot

The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO a...

SKU: EF-EF05032 | Brand: ElecFreaks

An alcohol vapour sensor module from the ELECFREAKS PlanetX range, designed for use with micro:bit via an RJ11 connector. The MQ3 sensor uses a tin dioxide (SnO2) sensing element whose conductivity increases with alco...

SKU: SF-SEN-23715 | Brand: SparkFun

The SEN55 environmental node is a straightforward, all-in-one sensor solution platform for the accurate measurement of various environmental parameters, such as particulate matter, volatile organic compounds (VOCs), o...

SKU: DF-SEN0537 | Brand: DFRobot

The ENS160 Air Quality Sensor uses ScioSense's ENS160 chip with TrueVOC and metal oxide (MOX) technology to monitor indoor air quality. It outputs TVOC (total volatile organic compounds), eCO2 (equivalent CO2), and AQ...