Environmental (temperature, humidity, air quality)

SKU: AF-4530 | Brand: Adafruit

The Adafruit LPS25 Pressure Sensor Breakout features the ST LPS25HB — an absolute barometric pressure sensor that measures atmospheric pressure from 260 to 1260 hPa. Use it for weather monitoring, altitude estimation,...

SKU: AF-4535 | Brand: Adafruit

The Adafruit HTS221 is an affordable I²C/SPI temperature and humidity sensor breakout board from ST. It measures relative humidity from 0–100% RH with 3.5% accuracy (in the 20–80% range) and temperature from -40 to 12...

SKU: AF-5303 | Brand: Adafruit

The Adafruit ESP32-S2 Feather with BME280 is identical to the standard ESP32-S2 Feather but with an on-board BME280 temperature, humidity, and barometric pressure sensor at I2C address 0x77. This makes it an instant I...

SKU: SF-SEN-18632 | Brand: SparkFun

The SparkFun MicroMod Environmental Function Board adds additional sensing options to the MicroMod Processor Boards. This Function Board includes three sensors to monitor air quality (SGP40), humidity & temperature (S...

SKU: DF-SEN0441 | Brand: DFRobot

This is a hydrogen and nitrogen oxide gas concentration sensor launched by DFRobot. The sensor uses MEMS technology to support gas concentration detection of NO, NO2 and H2. The matching sample code integrates the co...

SKU: SF-SEN-18521 | Brand: SparkFun

The SparkFun AS6212 Digital Temperature Sensor Breakout delivers high-accuracy temperature measurements with excellent low power consumption. Using the AS6212 sensor from ams AG, it achieves ±0.2 °C accuracy across a ...

SKU: DF-SEN0392 | Brand: DFRobot

The SGP40 Air Quality sensor adopts the new SGP40 digital VOC sensor chip launched by the well-known Sensirion. Based on the Sensirion’s CMOSens® technology, the SGP40 offers a complete sensor system on a single chip,...

SKU: SF-SEN-17050 | Brand: SparkFun

The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by method of cycling high and low tem...

SKU: SF-SEN-17049 | Brand: SparkFun

The MQ-2 is a smoke and combustible gas sensor manufactured by Winsen. It detects flammable gases and smoke in a concentration range of 300–10,000 ppm, with particularly high sensitivity to propane and smoke. It's wid...

SKU: EF-EF04100 | Brand: ElecFreaks

Octopus MG811 CO2 Gas Sensor is a CO2 electronic brick in our OCTOPUS series, the basic design for the outlook, PCB fixing holes and connections are the same with them.The higher the CO2 concentration is, the lower th...

SKU: EF-EF04087 | Brand: ElecFreaks

Octopus BME280 Pressure Sensor is an electric brick, which has integrated temperature sensor, air pressure sensor and humidity sensor onboard. We can use it to measure humidity, temperature and air pressure, or eve...

SKU: EF-EF04070 | Brand: ElecFreaks

The Octopus LM35 Analog Temperature Brick is a plug-and-play temperature sensor module based on the TI LM35D precision centigrade temperature sensor. The LM35 outputs a voltage linearly proportional to temperature (10...

SKU: DF-SEN0321 | Brand: DFRobot

The Gravity IIC Ozone Sensor measures ozone (O₃) concentration from 0 to 10 ppm with 10 ppb resolution using an electrochemical sensing element. Factory-calibrated for accurate readings out of the box, it connects via...

SKU: AF-4686 | Brand: Adafruit

The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...

SKU: AF-4633 | Brand: Adafruit

The Adafruit LPS22 Pressure Sensor Breakout features the ST LPS22HB — a tiny absolute barometric pressure sensor capable of measuring atmospheric pressure from 260 to 1260 hPa. Use it for weather monitoring, altitude ...

SKU: SF-SEN-16294 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: SF-SEN-16304 | Brand: SparkFun

The SparkFun TMP102 Qwiic breakout provides accurate digital temperature readings over I2C with minimal wiring. Based on the Texas Instruments TMP102, the sensor delivers 0.0625 °C resolution and ±0.5 °C accuracy, com...

SKU: SF-SEN-16467 | Brand: SparkFun

Looking to keep a log of the climate in your greenhouse, create a humidor control system or want to track temperature and humidity data for a weather station project? The SparkFun SHTC3 Humidity Sensor may be the perf...

SKU: AF-4414 | Brand: Adafruit

The Adafruit LPS33HW is a water-resistant barometric pressure sensor designed for use in harsh environments. The sensing element is housed in a ceramic package with waterproof gel protection, making it suitable for lo...

SKU: EF-EF04042 | Brand: ElecFreaks

The Octopus DS18B20 Digital Temperature Brick uses the DS18B20 1-Wire digital temperature sensor from Maxim IC to deliver accurate readings from −55 °C to +125 °C with ±0.5 °C accuracy. Each sensor has a unique 64-bit...