Environmental (temperature, humidity, air quality)

SKU: AF-4258 | Brand: Adafruit

The Adafruit LPS35HW is a water-resistant barometric pressure and temperature sensor from ST. The sensing element is housed in a ceramic package with waterproof gel protection, making it safe to use in damp and humid ...

SKU: SF-SEN-00250 | Brand: SparkFun

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document...

SKU: AF-381 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...

SKU: AF-6413 | Brand: Adafruit

The BMP585 from Bosch is a ported barometric pressure and temperature sensor featuring a tube attachment point for differential or remote pressure measurements. It delivers exceptional precision with altitude noise as...

SKU: DF-SEN0496 | Brand: DFRobot

This full-scale oxygen sensor uses an original AO2 CiTiceL electrochemical probe to measure oxygen concentrations from 0–100%Vol via I2C digital output. A built-in calibration algorithm on the signal board supports si...

SKU: AF-5182 | Brand: Adafruit

The AM2315C is an enclosed I2C temperature and humidity sensor featuring the modern AHT20 sensor inside a rugged housing with mounting bracket. It offers the same convenient form factor as the original AM2315 but with...

SKU: AF-3709 | Brand: Adafruit

The Adafruit SGP30 is a multi-pixel MOX (metal-oxide) gas sensor from Sensirion that measures Total Volatile Organic Compounds (TVOC) and equivalent CO2 (eCO2) for indoor air quality monitoring. With fully calibrated ...

SKU: AF-2738 | Brand: Adafruit

Control the same hardware as used in space...build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins to create an ‘As...

SKU: AF-6420 | Brand: Adafruit

The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m...

SKU: AF-6331 | Brand: Adafruit

The Adafruit SEN6x Breakout lets you quickly connect a Sensirion SEN66 (or other SEN6x) environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding r...

SKU: DF-SEN0601 | Brand: DFRobot

The RS485 Soil Sensor provides real-time monitoring of soil temperature, moisture, and electrical conductivity (EC) in a single rugged probe. It communicates via the MODBUS-RTU protocol over RS485, making it easy to i...

SKU: DF-EDU0157-EN | Brand: DFRobot

The Lark Weather Station is a compact, all-in-one portable weather device that measures wind speed, wind direction, temperature, humidity, and air pressure. It supports real-time data output via I2C and UART, making i...

SKU: AF-5971 | Brand: Adafruit

The Adafruit Chainable DS18B20 Extender Breakout makes it easy to connect multiple DS18B20 temperature sensors in a daisy chain using standard STEMMA JST PH 2mm cables. Each breakout includes screw terminal blocks for...

SKU: AF-5964 | Brand: Adafruit

The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding requ...

SKU: SF-SEN-19325 | Brand: SparkFun

The SEN54 sensor module from Sensirion combines the measurement of particulate matter, VOC, humidity, and temperature in a single package. The SEN54 sensors provide fully calibrated outputs with a digital interface, a...

SKU: DF-SEN0516 | Brand: DFRobot

This barometric pressure temperature sensor is equipped with TDK's newly launched ICP-10111 barometric pressure sensor, which is based on MEMS capacitor technology to achieve ultra-low power consumption, industry-lead...

SKU: DF-SEN0476 | Brand: DFRobot

This is a sensor that detects phosphine concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of...

SKU: DF-SEN0454 | Brand: DFRobot

A relay-output water leak detector with NO/NC (normally open/normally closed) switching. When water contacts the two sensing probes, the built-in relay triggers — suitable for activating alarms or shutting off equipme...

SKU: AF-4686 | Brand: Adafruit

The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...

SKU: AF-4089 | Brand: Adafruit

Get precise temperature readings with the ADT7410 High Accuracy I2C Temperature Sensor from Analog Devices. Featuring 16-bit resolution (0.0078°C) and ±0.5°C accuracy, this breakout delivers reliable measurements over...