Environmental (temperature, humidity, air quality)

SKU: DF-EDU0157-EN | Brand: DFRobot

The Lark Weather Station is a compact, all-in-one portable weather device that measures wind speed, wind direction, temperature, humidity, and air pressure. It supports real-time data output via I2C and UART, making i...

SKU: AF-5971 | Brand: Adafruit

The Adafruit Chainable DS18B20 Extender Breakout makes it easy to connect multiple DS18B20 temperature sensors in a daisy chain using standard STEMMA JST PH 2mm cables. Each breakout includes screw terminal blocks for...

SKU: AF-5964 | Brand: Adafruit

The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding requ...

SKU: SF-SEN-19325 | Brand: SparkFun

The SEN54 sensor module from Sensirion combines the measurement of particulate matter, VOC, humidity, and temperature in a single package. The SEN54 sensors provide fully calibrated outputs with a digital interface, a...

SKU: DF-SEN0516 | Brand: DFRobot

This barometric pressure temperature sensor is equipped with TDK's newly launched ICP-10111 barometric pressure sensor, which is based on MEMS capacitor technology to achieve ultra-low power consumption, industry-lead...

SKU: AF-4686 | Brand: Adafruit

The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...

SKU: SF-SEN-15805 | Brand: SparkFun

The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of ±0.1°C across the temperature range of -20°C to +50°Cs w...

SKU: AF-4089 | Brand: Adafruit

Get precise temperature readings with the ADT7410 High Accuracy I2C Temperature Sensor from Analog Devices. Featuring 16-bit resolution (0.0078°C) and ±0.5°C accuracy, this breakout delivers reliable measurements over...

SKU: AF-3721 | Brand: Adafruit

The AM2320 is a low-cost digital temperature and humidity sensor with an I2C interface — a simpler alternative to the classic DHT11/DHT22 sensors that require timing-critical bit-bang protocols. With standard I2C comm...

SKU: AF-1727 | Brand: Adafruit

The MAX31850K breakout board is a 1-Wire thermocouple amplifier with cold-junction compensation for K-type thermocouples. Unlike SPI-based amplifiers, the 1-Wire interface allows any number of thermocouple breakouts t...

SKU: AF-3251 | Brand: Adafruit

The Adafruit Si7021 is a temperature and humidity sensor from Silicon Labs with a PTFE filter for protection against dust and contaminants. It provides ±3% relative humidity accuracy over 0–80% RH and ±0.4 °C temperat...

SKU: AF-642 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: AF-3538 | Brand: Adafruit

Add heat-vision to your project with the Adafruit AMG8833 Grid-EYE Breakout. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like...

SKU: AF-6478 | Brand: Adafruit

This compact breakout combines the STCC4 CO2 sensor with a Sensirion SHT41 temperature and humidity sensor for convenient indoor air monitoring. The STCC4 measures true CO2 using a thermal conductivity method rather t...

SKU: AF-6482 | Brand: Adafruit

Built around Texas Instruments' TMP119, this breakout makes it easy to add extremely accurate temperature monitoring to your project over I2C. It is designed for applications where temperature really matters, includin...

SKU: DF-SEN0678 | Brand: DFRobot

This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitor...

SKU: PR-PIM638 | Brand: Little Bird

A wireless environmental monitoring board to keep track of inside conditions in your home, office or other habitat. Onboard sensors can measure temperature, humidity, pressure, gas and light. The top of the range...

SKU: AF-4816 | Brand: Adafruit

The BMP390 from Bosch (also known as BMP390L) is a high-precision barometric pressure and temperature sensor, offering the best altitude accuracy in the Bosch pressure sensor lineup. With relative accuracy of ±3 Pasca...

SKU: AF-5989 | Brand: Adafruit

The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature a...

SKU: PR-PIM181 | Brand: Little Bird

Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analog inputs. That's up to 10 different variables!It's ideal for monitoring c...