Environmental (temperature, humidity, air quality)

SKU: AF-3721 | Brand: Adafruit

The AM2320 is a low-cost digital temperature and humidity sensor with an I2C interface — a simpler alternative to the classic DHT11/DHT22 sensors that require timing-critical bit-bang protocols. With standard I2C comm...

SKU: AF-1727 | Brand: Adafruit

The MAX31850K breakout board is a 1-Wire thermocouple amplifier with cold-junction compensation for K-type thermocouples. Unlike SPI-based amplifiers, the 1-Wire interface allows any number of thermocouple breakouts t...

SKU: AF-3251 | Brand: Adafruit

The Adafruit Si7021 is a temperature and humidity sensor from Silicon Labs with a PTFE filter for protection against dust and contaminants. It provides ±3% relative humidity accuracy over 0–80% RH and ±0.4 °C temperat...

SKU: DF-SEN0231 | Brand: DFRobot

The Formaldehyde (HCHO) sensor is an Arduino & Raspberry Pi compatible module, which is the ideal solution for indoor air quality monitor. This is a HCHO(CH2O) sensor module. It can be used to measure HCHO in a...

SKU: AF-3538 | Brand: Adafruit

Add heat-vision to your project with the Adafruit AMG8833 Grid-EYE Breakout. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like...

SKU: AF-6482 | Brand: Adafruit

Built around Texas Instruments' TMP119, this breakout makes it easy to add extremely accurate temperature monitoring to your project over I2C. It is designed for applications where temperature really matters, includin...

SKU: AF-4816 | Brand: Adafruit

The BMP390 from Bosch (also known as BMP390L) is a high-precision barometric pressure and temperature sensor, offering the best altitude accuracy in the Bosch pressure sensor lineup. With relative accuracy of ±3 Pasca...

SKU: EC-SES90101S | Brand: Elecrow

The MQ-9 is an analog gas sensor module with high sensitivity to carbon monoxide (CO), methane, propane, and LPG. It uses an SnO2 sensing element that changes conductivity in the presence of target gases, making it su...

SKU: SF-SEN-15103 | Brand: SparkFun

The Sensirion SPS30 is a compact, high-quality optical particle sensor that uses laser scattering and Sensirion's innovative contamination-resistance technology for superior binning and particle measurement. It measur...

SKU: AF-6174 | Brand: Adafruit

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. Featuring a PTFE membrane for protection a...

SKU: AF-5989 | Brand: Adafruit

The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature a...

SKU: PR-PIM181 | Brand: Little Bird

Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analog inputs. That's up to 10 different variables!It's ideal for monitoring c...

SKU: SF-SEN-18377 | Brand: SparkFun

Need to keep track of the airflow in your data center or around your servers? How about making sure your HVAC and air control systems are functioning at full capacity? Well, the new SparkFun FS3000-1005 Air Velocity S...

SKU: SF-SEN-15805 | Brand: SparkFun

The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of ±0.1°C across the temperature range of -20°C to +50°Cs w...

SKU: PI-COM1701 | Brand: Pimoroni

The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn’t require any external calibration to provide t...

SKU: PI-RPI-005 | Brand: Pimoroni

Make your Raspberry Pi into an Astro Pi with the Sense HAT - Pressure, humidity, temperature and orientation sensors combined with a beautiful 8x8 LED matrix!Attach the HAT to your Pi's GPIO pins and you can...

SKU: PR-PIM031 | Brand: Little Bird

The Weather module reads temperature and pressure. It's ideal for setting up a mini weather station to monitor conditions in your house or garage. Features BMP280 sensor Detects temperature and pressure ...

SKU: PR-PIM203 | Brand: Little Bird

Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analog inputs. That's up to 10 different variables! It's ideal for monitoring ...

SKU: RP-SC0329_1 | Brand: Raspberry Pi Ltd

The Raspberry Pi Sense HAT is an add-on board that attaches to the Raspberry Pi via the 40-pin GPIO header, adding a suite of environmental and motion sensors, an 8×8 RGB LED matrix, and a mini joystick. It's the same...