Environmental (temperature, humidity, air quality)

SKU: LB-LR0214-16 | Brand: Little Bird

This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for switching heating or cooling loads. It uses an NTC thermistor probe (i...

SKU: LB-LR0298 | Brand: Little Bird

This stand alone DHT11 can read the temperature and humidity and send the information over a one wire, simplex serial bus. Arduino.cc provides a DHT11 library to aid in communicating with this module.**DHT11 Temper...

SKU: LB-LR0285 | Brand: Little Bird

Feature: 0.5°C Ensured Accuracy (+25°C) Suitable for Remote Applications Low Cost Due to Wafer-Level Trimming Operates from 4 to 30 V Less than 60-μA Current Drain Low Self-Heating, 0.08°C in Still Air Low Impedance O...

SKU: AF-372 | Brand: Adafruit

An epoxy-coated precision NTC thermistor with a 10kΩ resistance at 25°C and ±1% accuracy. The resistance decreases as temperature rises and increases as it cools, making it straightforward to measure temperature with ...

SKU: TB-RN3444 | Brand: Little Bird

A 100 kΩ NTC (Negative Temperature Coefficient) thermistor in a radial dipped-epoxy package. These ceramic sensors change resistance rapidly with temperature, making them ideal for temperature measurement, compensatio...

SKU: AF-576 | Brand: Adafruit

Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has revers...

SKU: SF-SEN-17052 | Brand: SparkFun

The MQ-136 is a Hydrogen Sulfide detection sensor with a sensing range of 1 - 200ppm. The sensing element is SnO2, which has lower conductivity in clean air. When H₂S gas exists, the sensor’s conductivity gets higher ...

SKU: TB-RN3442 | Brand: Little Bird

A 47 kΩ NTC (Negative Temperature Coefficient) thermistor in a compact 5 mm radial package. NTC thermistors decrease in resistance as temperature rises, making them ideal for temperature sensing, thermal protection, a...

SKU: TB-RN3436 | Brand: Little Bird

A 1 kΩ NTC (negative temperature coefficient) thermistor in a 5 mm radial dipped-epoxy package. The resistance decreases as temperature increases, making it suitable for temperature sensing, thermal compensation, and ...

SKU: DF-DFR0280 | Brand: DFRobot

Sharp GP2Y1010AU Dust Sensor requires some wiring on the breadboard and a list of components to make it Arduino compatible. This has turned down several people due to the thin wires of the sharp sensor making it ...

SKU: AF-249 | Brand: Adafruit

This pack includes everything you need to build a light and temperature data logger with an Arduino. The Adafruit data logger shield records sensor readings to an SD card with real-time timestamps, while the included ...

SKU: LB-DHT11-SENSOR | Brand: Little Bird

The Little Bird DHT11 Temperature and Humidity Sensor Module provides calibrated digital temperature and humidity readings from a single sensor. Designed and made in Sydney, Australia, it requires no extra components ...

SKU: AF-4881 | Brand: Adafruit

Here is a jolly cute, palm-sized, Bluetooth-enabled sensor to monitor your room's temperature and humidity. Only 43mm x 43mm, we dig its small form factor and minimal design. The shell is made of durable ABS&nbsp...

SKU: PL-1643 | Brand: Pololu

Sparkfun’s carrier board for the HIH-4030 relative humidity (%RH) sensor from Honeywell outputs an analog voltage that varies nearly linearly with humidity. It operates at 5 V while drawing only 200 μA and ...