Environmental (temperature, humidity, air quality)

SKU: LB-LR0214-16 | Brand: Little Bird

This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for switching heating or cooling loads. It uses an NTC thermistor probe (i...

SKU: SF-SEN-10988 | Brand: SparkFun

This is the same temperature sensor that is included in our SparkFun Inventor’s Kit. The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to t...

SKU: AF-4890 | Brand: Adafruit

Need to measure something with a very slim sensor? This precision 10K thermistor is an inexpensive way to measure temperature in a small gap, or taped to a flat surface, it's only 0.2mm wide!The resistance in 25°C is ...

SKU: AF-165 | Brand: Adafruit

The TMP36 is a low-power analog temperature sensor that outputs a voltage proportional to ambient temperature. It operates on 2.7–5.5V and requires no external calibration — simply read the analog voltage and convert ...

SKU: LB-10K-5 | Brand: Little Bird

A pack of five NTC thermistor temperature probes, each with a 1-metre wire lead for remote temperature sensing. These 10 KΩ (at 25°C) NTC sensors are sealed in a cylindrical metal probe for durability and are suitable...

SKU: LB-LS7682 | Brand: Little Bird

This spare outdoor unit set is designed for use with professional wireless weather stations, providing the essential sensors needed to accurately monitor local weather conditions. Ideal as a replacement set or for cus...

SKU: KI-5336 | Brand: Kitronik

The Kitronik Smart Air Quality Board provides a complete air monitoring and datalogging solution for the Raspberry Pi Pico. With an onboard BME688 environmental sensor, OLED display, real-time clock support, and Micro...

SKU: LB-24-THERMISTOR | Brand: Little Bird

A thermistor changes its resistance with temperature. Find our tutorial here A thermistor is a type of variable resistor whose resistance changes with temperature. Let's take a closer look at the thermistor module....

SKU: SF-DEV-13956 | Brand: SparkFun

The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There are also connections on this shield to optional senso...

SKU: SF-SEN-00250 | Brand: SparkFun

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document...

SKU: LB-LR0010 | Brand: Little Bird

Digital TempTemperature sensing module using an NTC thermistor. The output signal at ‘DO’ switches high when the preset (adjustable) temperature is reached. An analog output signal from the sensor is availab...

SKU: TB-RN3444 | Brand: Little Bird

A 100 kΩ NTC (Negative Temperature Coefficient) thermistor in a radial dipped-epoxy package. These ceramic sensors change resistance rapidly with temperature, making them ideal for temperature measurement, compensatio...

SKU: TB-RN3442 | Brand: Little Bird

A 47 kΩ NTC (Negative Temperature Coefficient) thermistor in a compact 5 mm radial package. NTC thermistors decrease in resistance as temperature rises, making them ideal for temperature sensing, thermal protection, a...

SKU: TB-RN3436 | Brand: Little Bird

A 1 kΩ NTC (negative temperature coefficient) thermistor in a 5 mm radial dipped-epoxy package. The resistance decreases as temperature increases, making it suitable for temperature sensing, thermal compensation, and ...

SKU: SF-SEN-00251 | Brand: SparkFun

36" high temperature Type-K Thermocouple with glass braid insulation.