Components

SKU: KI-2751 | Brand: Kitronik

This wearable module is ideal for all of your e-textiles project needs including adding the endless possibilities of programming to your wearable projects!Video:Please note: other Kitronik products are included in thi...

SKU: KI-2709 | Brand: Kitronik

This sewable two position miniature slide switch from Kitronik allows LEDs to be turned on or off in your e-textiles projects.It has two connection points to which the conductive thread is connected. The PCBs are doub...

SKU: AF-1512 | Brand: Adafruit

Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This mak...

SKU: TB-HM3250 | Brand: Little Bird

A 40-pin (2×20) dual in-line (DIL) jumper strip rated at 3A. The snap-apart design lets you break the strip into individual 2-pin jumper shunts or smaller groups to suit your needs. Key Features Snap-Apart Design –...

SKU: TB-PP1150 | Brand: Little Bird

A right-angle 10-pin IDC box header for PCB mounting, with a locking mechanism to secure ribbon cable connections. The 2.54mm (0.1") pitch double-row header features gold-plated pins and solder-tag attachment. Specif...

SKU: TB-RG5204 | Brand: Little Bird

A 47 nF polyester film capacitor (greencap) rated at 630V DC. Polyester capacitors offer good stability across a wide range of values at low cost, making them a popular general-purpose choice for filtering, coupling, ...

SKU: TB-RG5205 | Brand: Little Bird

A 47 nF polyester film capacitor (greencap) rated at 630V DC. Polyester capacitors offer good stability across a wide range of values at low cost, making them a popular general-purpose choice for filtering, coupling, ...

SKU: TB-RE6316 | Brand: Little Bird

A 1000µF 16V low-ESR electrolytic capacitor rated for 105°C operation. Low-ESR capacitors provide stable, low-impedance characteristics, making them well suited for power supply filtering, voltage ripple reduction, an...

SKU: LB-00331 | Brand: Little Bird

A small push-button switch module on a breakout board with a built-in pull resistor, so no external resistors are needed. The 3-pin header (signal, VCC, GND) plugs directly into a solderless breadboard or connects via...

SKU: AF-1616 | Brand: Adafruit

The Adafruit Trellis is an open-source backlight keypad driver system designed to work with the Adafruit 4×4 elastomer keypad and 3mm LEDs. Each tile handles keypress detection and LED control for a 4×4 grid over I2C,...

SKU: AF-1614 | Brand: Adafruit

The Adafruit Small 1.2" 8×8 LED Matrix w/I2C Backpack in ultra-bright white combines a bright 8×8 LED matrix with a dedicated HT16K33 driver backpack, letting you add a compact display to any microcontroller project w...

SKU: AF-1611 | Brand: Adafruit

A soft, squishy 4×4 silicone elastomer keypad with 16 buttons, each designed to fit a 3mm LED for optional backlighting. The conductive pad on the bottom of each button closes a contact underneath when pressed, provid...

SKU: AF-1644 | Brand: Adafruit

These nylon clips will let you attach our flexible NeoPixel strips to a wall, moulding, or project. Just side the rubber tubing thru so that the clips are in between two LEDs. Comes in a pack of 5.

SKU: AF-3630 | Brand: Adafruit

Stranded NeoPixel dots are perfect for adding individual points of colour to costumes, wearables, and decorations without the rigidity of a PCB strip. Each strand contains 20 individually addressable NeoPixel LEDs enc...

SKU: PJ-HEADER_12X1 | Brand: Little Bird

A single-row male pin header strip with 12 pins at standard 0.1" (2.54 mm) spacing. Designed for soldering into PCBs and breakout boards, these headers provide reliable connections for breadboarding, jumper wires, and...

SKU: PJ-SOCKET_14X1 | Brand: Little Bird

A standard 14-pin DIP IC socket with 0.1" (2.54mm) pin spacing. Use it to mount 14-pin DIP integrated circuits on your PCB or breadboard, allowing easy chip insertion and removal without soldering the IC directly. Ke...

SKU: PJ-HEADER_14X1 | Brand: Little Bird

Pins (header), 14 pins, 0.1 inch (2.54 mm) spacing

SKU: AF-1681 | Brand: Adafruit

The VS1053 is a multi-format audio codec chip, loved by many for its simplicity and power. CODEC stands for "Coder & Decoder" and that's pretty much what this little chip does - it can decode digital audio files su...

SKU: AF-1719 | Brand: Adafruit

Make a small linear display with multiple colors using this elegant bi-color LED bargraph. Only 1.2" long, it is quite visible but not so large it wont plug into a breadboard! 24 LEDs are contained in the plastic b...

SKU: AF-2329 | Brand: Adafruit

The Adafruit DotStar Digital LED Strip (144 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing ...