Components

SKU: KI-2709 | Brand: Kitronik

This sewable two position miniature slide switch from Kitronik allows LEDs to be turned on or off in your e-textiles projects.It has two connection points to which the conductive thread is connected. The PCBs are doub...

SKU: AF-1506 | Brand: Adafruit

An ultra-high-density NeoPixel strip packed with 144 individually addressable RGB LEDs per metre on a flexible black PCB with black mask. Each pixel offers full 24-bit colour control, and only a single data pin is nee...

SKU: AF-1512 | Brand: Adafruit

Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This mak...

SKU: AF-4020 | Brand: Adafruit

Everything you need to get started with the NeoTrellis M4 in one kit. This pack bundles the NeoTrellis M4 Mainboard, an acrylic enclosure, silicone elastomer button pads, and rubber feet — ready to assemble into a com...

SKU: TB-PP1150 | Brand: Little Bird

A right-angle 10-pin IDC box header for PCB mounting, with a locking mechanism to secure ribbon cable connections. The 2.54mm (0.1") pitch double-row header features gold-plated pins and solder-tag attachment. Specif...

SKU: TB-RG5204 | Brand: Little Bird

A 47 nF polyester film capacitor (greencap) rated at 630V DC. Polyester capacitors offer good stability across a wide range of values at low cost, making them a popular general-purpose choice for filtering, coupling, ...

SKU: TB-RG5205 | Brand: Little Bird

A 47 nF polyester film capacitor (greencap) rated at 630V DC. Polyester capacitors offer good stability across a wide range of values at low cost, making them a popular general-purpose choice for filtering, coupling, ...

SKU: TB-RE6316 | Brand: Little Bird

A 1000µF 16V low-ESR electrolytic capacitor rated for 105°C operation. Low-ESR capacitors provide stable, low-impedance characteristics, making them well suited for power supply filtering, voltage ripple reduction, an...

SKU: LB-00331 | Brand: Little Bird

A small push-button switch module on a breakout board with a built-in pull resistor, so no external resistors are needed. The 3-pin header (signal, VCC, GND) plugs directly into a solderless breadboard or connects via...

SKU: AF-1616 | Brand: Adafruit

The Adafruit Trellis is an open-source backlight keypad driver system designed to work with the Adafruit 4×4 elastomer keypad and 3mm LEDs. Each tile handles keypress detection and LED control for a 4×4 grid over I2C,...

SKU: AF-1614 | Brand: Adafruit

The Adafruit Small 1.2" 8×8 LED Matrix w/I2C Backpack in ultra-bright white combines a bright 8×8 LED matrix with a dedicated HT16K33 driver backpack, letting you add a compact display to any microcontroller project w...

SKU: AF-1633 | Brand: Adafruit

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright pure green dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA an...

SKU: PJ-HEADER_12X1 | Brand: Little Bird

A single-row male pin header strip with 12 pins at standard 0.1" (2.54 mm) spacing. Designed for soldering into PCBs and breakout boards, these headers provide reliable connections for breadboarding, jumper wires, and...

SKU: PJ-SOCKET_14X1 | Brand: Little Bird

A standard 14-pin DIP IC socket with 0.1" (2.54mm) pin spacing. Use it to mount 14-pin DIP integrated circuits on your PCB or breadboard, allowing easy chip insertion and removal without soldering the IC directly. Ke...

SKU: PJ-HEADER_14X1 | Brand: Little Bird

Pins (header), 14 pins, 0.1 inch (2.54 mm) spacing

SKU: AF-1681 | Brand: Adafruit

The VS1053 is a multi-format audio codec chip, loved by many for its simplicity and power. CODEC stands for "Coder & Decoder" and that's pretty much what this little chip does - it can decode digital audio files su...

SKU: AF-2052 | Brand: Adafruit

A 16×8 LED matrix backpack kit featuring two ultra-bright 1.2" orange 8×8 round LED matrices on a single I2C-controlled driver board. The HT16K33 chip handles all the multiplexing, so you only need two I2C pins (SDA a...

SKU: AF-2036 | Brand: Adafruit

The 16×8 1.2" LED Matrix + Backpack combines two ultra-bright round yellow-green 8×8 LED matrices on a single, compact driver board. The classic round pixel design gives a retro dot-matrix aesthetic — ideal for scroll...

SKU: AF-2240 | Brand: Adafruit

The Adafruit DotStar Digital LED Strip (60 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing r...

SKU: AF-2241 | Brand: Adafruit

Adafruit DotStar LED strips use 2-wire SPI instead of the single-wire protocol used by NeoPixels, allowing much faster data rates (up to 32 MHz) and a 20 KHz PWM refresh rate. This makes DotStars ideal for persistence...