Components

SKU: AF-2240 | Brand: Adafruit

The Adafruit DotStar Digital LED Strip (60 LED/m, white flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing r...

SKU: AF-2241 | Brand: Adafruit

Adafruit DotStar LED strips use 2-wire SPI instead of the single-wire protocol used by NeoPixels, allowing much faster data rates (up to 32 MHz) and a 20 KHz PWM refresh rate. This makes DotStars ideal for persistence...

SKU: AF-2428 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-2436 | Brand: Adafruit

The Adafruit DotStar APA102 Warm White LED Strip (60 LED/m, ~3000K) uses the same integrated DotStar driver as the RGB strips but with dedicated warm white phosphor LEDs. The result is an incredibly bright, consistent...

SKU: DF-SEN0047 | Brand: DFRobot

This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower t...

SKU: PL-2536 | Brand: Pololu

A pack of 10 addressable RGB LEDs in a larger 8 mm through-hole form factor with diffused lenses. Each LED contains an integrated WS2811 driver, allowing you to control the colour of every LED individually using just ...

SKU: AF-2562 | Brand: Adafruit

Everything you need to get started with NeoPixel LED strips in one convenient pack. Includes a 1-metre NeoPixel strip with black flex PCB, power supply, and connectors — just add a microcontroller and you're ready to ...

SKU: DF-DFR0499 | Brand: DFRobot

The 64×64 RGB LED Matrix Panel with 3mm pitch from DFRobot features 4096 full-colour RGB LEDs, each independently controllable. With its slim 11mm profile, high brightness, and durable construction, this panel is suit...

SKU: DF-DFR0472 | Brand: DFRobot

A 32×32 full-colour RGB LED matrix panel with 1024 individually addressable pixels at 4mm pitch. Each LED can display any colour, making this panel suitable for text, animations, and graphics. The high-brightness LEDs...

SKU: DF-DFR0167-W | Brand: DFRobot

 This LilyPad LED Micro is Discontinued Now, We recommend other LilyPad as a suitable replacement. Here is a simple 5 pack of white LED for LilyPad. Light up the night! LilyPad is a wearable e-textile technol...

SKU: DF-DFR0167-Y | Brand: DFRobot

Here is a simple 5 pack of yellow LED for LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creati...

SKU: DF-DFR0167-B | Brand: DFRobot

Here is a simple 5 pack of blue LED for LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was crea...

SKU: DF-DFR0199-W | Brand: DFRobot

Here is a simple 5 pack of white LED micro for LilyPad. Need a smaller way to add some 'twinkle' to your LilyPad project? Then you need some LilyPad Micros! A LilyPad Micro is like a smaller version of the Li...

SKU: DF-DFR0199-Y | Brand: DFRobot

A pack of five yellow LilyPad LED Micro boards for e-textile projects. These tiny LEDs are a smaller alternative to the standard LilyPad LED board — ideal for elegant designs and sheer fabrics where minimal size and w...

SKU: DF-DFR0199-G | Brand: DFRobot

The LilyPad LED Micro is a tiny surface-mount LED board designed for e-textile and wearable electronics projects. At just 3.2 × 1.6mm, it's one of the smallest ways to add a point of light to your LilyPad creations — ...

SKU: DF-C-PCB-002 | Brand: DFRobot

Get your custom PCB designs professionally fabricated with this 2-layer PCB service. You will receive 10 PCBs per order, with a maximum board size of 10cm × 10cm. Quantity is in multiples of 10 — add more to your cart...

SKU: SF-COM-08747 | Brand: SparkFun

This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. Using two of these bezels with two of the top bezels will create a 4x4 bezel appropriate for the full button ...

SKU: SF-COM-08746 | Brand: SparkFun

This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. We use four 4/40-0.5" size screws matched with plastic standoffs to attach the 2x2 button pad and Simon proje...

SKU: SF-DEV-14063 | Brand: SparkFun

The LilyMini ProtoSnap is a great way to get started learning about creating interactive e-textile circuits before you start sewing. Like other LilyPad ProtoSnap boards, the LilyMini ProtoSnap has all of its pieces...

SKU: SF-PRT-08670 | Brand: SparkFun

This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 130mm length Documents: JST connector