Circuitry & IOT

SKU: DF-FIT0266 | Brand: DFRobot

A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black w...

SKU: SF-PRT-11026 | Brand: SparkFun

If you need to knock up a quick prototype there’s nothing like having a pile of jumper wires to speed things up, and let’s face it: sometimes you want quantity over quality. These are the same jumper wires that com...

SKU: SF-PRT-12796 | Brand: SparkFun

These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header. Combine these with our male to male jumpers to create a male to f...

SKU: AF-3405 | Brand: Adafruit

The Adafruit HUZZAH32 ESP32 Feather Board brings the powerful Espressif ESP32 dual-core processor into the Adafruit Feather form factor. With WiFi, Bluetooth Classic, and BLE support, a built-in USB-to-serial converte...

SKU: AF-830 | Brand: Adafruit

A 4×AA battery holder with a snap-on cover and built-in on/off switch. Holds four AA batteries in series, outputting a nominal 6V (alkaline) or 4.8V (NiMH), making it a convenient portable power source for 5V microcon...

SKU: AF-1954 | Brand: Adafruit

These Female/Male Extension jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 20 (2 pieces of ea...

SKU: DF-DFR0181 | Brand: DFRobot

A classic open-source physical computing board for learning, prototyping and building stand-alone interactive projects. It can also connect to software running on your computer, including environments such as Flash, P...

SKU: WS-26541 | Brand: Waveshare

Unlock the full potential of IoT development with the cutting-edge ESP32-S3 Development Board, your all-in-one solution for creating interactive and smart connected devices. This powerhouse board is designed by Wavesh...

SKU: DF-DFR0868 | Brand: DFRobot

The Beetle ESP32-C3 is a coin-sized IoT development board based on the ESP32-C3 RISC-V 32-bit single-core processor. Measuring just 25 × 20.5 mm, it breaks out up to 13 GPIO pins and integrates lithium battery chargin...

SKU: EF-EF08268 | Brand: ElecFreaks

Bring an AI dog robot into the micro:bit classroom with a kit designed to make robotics and artificial intelligence approachable for students.The XGO robot has 12 DOFs and supports omni-movement, letting it perform in...

SKU: EF-EF04055 | Brand: ElecFreaks

OCTOPUS PIR Sensor module is a type of electronic building block based on AM412 pyroelectric digital smart sensor. It can be used in sensing and detection of human or animal motion, sensing distance is about 4-5 me...

SKU: LB-BATTERYAA | Brand: Little Bird

A 2× AA battery holder with on/off switch, designed for powering the BBC micro:bit on the go. The JST connector plugs directly into the micro:bit's battery port, and the ~14 cm cable provides enough length for flexibl...

SKU: KI-5603 | Brand: Kitronik

The Kitronik Inventor's Kit is a comprehensive electronics starter kit designed for the BBC micro:bit. Includes everything you need to complete 12 hands-on experiments using LEDs, motors, LDRs, capacitors, a potentiom...

SKU: LB-LR0509A | Brand: Little Bird

Specification:14 Digital input / output port: RX, TX, D2 - D138 analog inputs: A0 - A71 pairs of ports TTL level serial transceiver: RX / TX6 PWM ports: D3, D5, D6, D9, D10, D11Using Atmel AtMega328P-AU MCUSupport...

SKU: LB-LR0401 | Brand: Little Bird

This compact module is built around the L3G4200D, a low-power 3-axis angular rate sensor with temperature data output. It measures the rate of change in rotation on the X, Y and Z axes, making it useful for motion sen...

SKU: SF-DEV-22633 | Brand: SparkFun

Arduino empowers makers’ creativity and passion for innovation with a robust new board that’s perfect for all users, from beginners to experts – allowing anyone to easily connect to the internet and create IoT proj...

SKU: AF-5714 | Brand: Adafruit

The Feather RP2040 with RFM95 LoRa Radio (915 MHz) combines the RP2040 dual-core processor with an SX1276-based LoRa radio transceiver for long-range wireless communication at 868 or 915 MHz. The frequency is software...

SKU: LB-MICRO-INVENT | Brand: Little Bird

Get creative, connected and coding with a complete inventor kit for the BBC micro:bit. It includes a micro:bit board and a selection of parts for building and experimenting with multiple electronic circuits.You can wo...

SKU: LB-LR0309-20 | Brand: Little Bird

A simple single-slot 9V battery holder case with wire leads for soldering or connecting directly to your projects. Keeps your battery secure and organised. Key Features Wire Leads – Pre-attached cables for direct s...

SKU: LB-LR0003 | Brand: Little Bird

This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound inte...