Circuitry & IOT

SKU: EC-WCW32110W | Brand: Elecrow

The ESP-WROOM-32 is Espressif's powerful Wi-Fi, Bluetooth Classic, and BLE module built around the ESP32 dual-core processor. It's a versatile platform for IoT applications ranging from low-power sensor networks to de...

SKU: DF-SEN0387 | Brand: DFRobot

This magnetic switch consists of two parts: a reed switch sensor with cable and a magnet trigger in a plastic housing. When the magnet is brought within approximately 1 cm of the sensor, the reed switch closes, allowi...

SKU: EC-DTS02115S | Brand: Elecrow

This shield is specially designed for Micro: bit, LCD1602 and Micro: bit using 4-wire connection, it is the same size as LCD1602 display and has 4 crowtail interface, IIC, UART, analog port and digital port. LCD160...

SKU: EF-EF10095 | Brand: ElecFreaks

A 2×AA battery holder designed specifically for the BBC micro:bit. The built-in JST PH connector plugs directly into the micro:bit's battery socket, and the integrated on/off switch with a secure cover provides safe, ...

SKU: EF-EF08189 | Brand: ElecFreaks

ELECFREAKS micro:bit basic kit is an entry-level kit. We carefully select 5 most common electric bricks, which can be easily connected to micro:bit via basic:bit. This kit can help students learn how to build their mi...

SKU: AF-1699 | Brand: Adafruit

Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack with disconnect-switches on Left and Right channels as well as a center ground pin. You can use any 3.5mm...

SKU: SF-PRT-12083 | Brand: SparkFun

This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...

SKU: AF-161 | Brand: Adafruit

CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...

SKU: AF-239 | Brand: Adafruit

This is a 'full-size' breadboard, 830 tie points. Good for small and medium projects. It's 2.2" x 7" (5.5 cm x 17 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the powe...

SKU: DF-FIT0365 | Brand: DFRobot

 INTRODUCTION Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in length. Each pack comes with 30 jumper wires in a...

SKU: LB-LR0178-350 | Brand: Little Bird

SKU: DF-DFR1075 | Brand: DFRobot

The FireBeetle 2 ESP32-C6 is a low-power IoT development board built around a 160MHz RISC-V single-core processor. It supports Wi-Fi 6 (802.11ax), Bluetooth 5, Zigbee 3.0, Thread 1.3, and the Matter smart home standar...

SKU: EF-EF02054 | Brand: ElecFreaks

DescriptionWukong 2040 is a multifunctional Breakout Board designed for Raspberry Pi Pico. In terms of functions, it is equipped with a buzzer, A\B buttons, rainbow lights, motor interface, reset button, etc., to meet...

SKU: AF-5715 | Brand: Adafruit

The ESP32-H2-DevKitM-1 is an entry-level development board based on the ESP32-H2-MINI-1 module, featuring Bluetooth Low Energy 5, IEEE 802.15.4, Thread, Matter, and Zigbee support on a single chip. It's an ultra-low-p...

SKU: DF-DFR0896 | Brand: DFRobot

The ESP32-S3-WROOM-1-N4 is a powerful Wi-Fi and Bluetooth LE MCU module built around the ESP32-S3 SoC. Featuring a dual-core Xtensa LX7 processor running at up to 240MHz, 4MB SPI flash, and hardware acceleration for n...

SKU: AF-5348 | Brand: Adafruit

The Adafruit QT Py ESP32-S2 with uFL Antenna Port is the extended-range version of the QT Py ESP32-S2. Instead of an on-board antenna, it features a uFL connector so you can attach any 2.4 GHz Wi-Fi antenna for signif...

SKU: EC-SEL71220A | Brand: Elecrow

A current sensing module based on the Allegro ACS712 Hall effect sensor, capable of accurately measuring both AC and DC current up to ±20 A. The module outputs a proportional analogue voltage that can be read directly...

SKU: EC-SEA0001T | Brand: Elecrow

The Crowtail Starter Kit for Arduino is a beginner-friendly electronics kit built around the Crowduino Uno-SD board and the Crowtail modular connector system. With 22 plug-and-play modules and over 20 guided tutorials...

SKU: EC-ACS70028DH | Brand: Elecrow

The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor control...

SKU: EF-EF04093 | Brand: ElecFreaks

Octopus Analog UV sensor (GUVA-S12SD) is the UV electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the...