Circuitry & IOT

SKU: LB-LS5508 | Brand: Little Bird

A 2×AA battery holder with a protective cover, built-in on/off switch, and large alligator clip leads. The alligator clips make it easy to connect to circuits, components, and conductive materials without soldering — ...

SKU: AF-4890 | Brand: Adafruit

Need to measure something with a very slim sensor? This precision 10K thermistor is an inexpensive way to measure temperature in a small gap, or taped to a flat surface, it's only 0.2mm wide!The resistance in 25°C is ...

SKU: LB-LR0004 | Brand: Little Bird

Features Model: KY-038 Adopt LM393 main chip Electric condenser microphone Features Single channel signal output Low level output signal used for sound control light Great module for sound alarm system Working voltage...

SKU: SF-PRT-15101 | Brand: SparkFun

This two-cell AAA battery holder is made for powering BBC micro:bit projects without needing to stay tethered to USB.The attached 6" (~150mm) lead is terminated with a JST-PH connector that mates with the JST socket o...

SKU: PL-1017 | Brand: Pololu

This single-row, 7-pin straight female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. It provides a reliable socket connection for board-to-board and board-to-wire applications. ...

SKU: AF-266 | Brand: Adafruit

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten colors). They have 0.1" socke...

SKU: AF-1141 | Brand: Adafruit

The Adafruit Data Logging Shield makes it easy to save sensor data to an SD card with accurate timestamps. It combines an SD card interface with a real-time clock (RTC) and a prototyping area on an Arduino-compatible ...

SKU: RP-PICO-2W-ELEC | Brand: Raspberry Pi Ltd

If you're looking for a Raspberry Pi Pico 2W Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico 2W.The components of this Pico 2W Electronics Kit enable you to cre...

SKU: EC-DLC35020S | Brand: Elecrow

This handheld terminal is based on the ESP32 controller, equipped with a powerful ESP32-S3 chip, and supports 2.4GHz Wi-Fi and Bluetooth 5 (LE), providing more powerful computing and processing capabilities for IoT...

SKU: EF-EF08256 | Brand: ElecFreaks

The micro:bit Smart Health Kit has a well-selection of the Sensor:bit, Analog UV Sensor, PIR Sensor, MQ3 Alcoholic Sensor Brick, Servo and etc., we could use it to build such themes as the UV light detections, the ...

SKU: EF-EF08203 | Brand: ElecFreaks

The Smart Science IoT Kit from ElecFreaks is a comprehensive sensor and IoT learning kit built around the IoT:bit breakout board for micro:bit. It combines environmental sensors with WiFi connectivity, allowing studen...

SKU: LB-CTCREP | Brand: Little Bird

Already run the Crack the Code Unit of Work and want to replenish your component box and student sets? At Little Bird Electronics we have put together a replenishment kit for your Crack the Code unit of work. &nbsp...

SKU: PRT-BK-12043 | Brand: Little Bird

This white Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jum...

SKU: PL-1037 | Brand: Pololu

The 0.100″ (2.54 mm) 2×20-Pin Straight Female Header is a double-row, 40-pin socket strip designed to mate with standard 0.1″ pitch male headers. This is the standard GPIO header size used on Raspberry Pi and other si...

SKU: LB-PT101011M-20 | Brand: Little Bird

A 20-metre roll of 20mm wide copper foil tape with double-sided conductive adhesive. The low-resistance copper provides excellent conductivity for electrical projects, EMI shielding, paper circuits, and even garden sl...

SKU: AF-5400 | Brand: Adafruit

The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provid...

SKU: LB-CTC-2-KIT-NO-ARDUINO | Brand: Little Bird

Dive into the world of coding and electronics with the Crack the Code V2.0 Kit! This kit is designed to provide a hands-on learning experience, perfect for educators and students looking to explore essential concepts ...

SKU: EF-EF10130 | Brand: ElecFreaks

Alligator clips (also known as crocodile clips) are one of the most useful tools on any maker's workbench. Whether you're testing a circuit, connecting a micro:bit to external components, or extending your multimeter ...

SKU: LB-LR0005 | Brand: Little Bird

The Line Trace Sensor Module uses an infrared emitter/detector pair to measure the reflectivity of a surface below it. When the reflectivity exceeds an adjustable threshold, the output goes low — making it ideal for b...

SKU: DF-FIT0154 | Brand: DFRobot

These high-quality breadboard jumper cables are made with 22 AWG multi-strand wire and sturdy male pins on both ends. Each cable is approximately 214 mm long and comes in assorted colours for easy circuit identificati...