Circuitry Accessories

SKU: DF-FIT0112 | Brand: DFRobot

A pack of 10 colour-coded alligator-to-alligator clip test cables for quick, hands-free circuit connections. Each cable features strong, grippy clips on both ends and heavy-insulation copper wire — ideal for prototypi...

SKU: SF-PRT-12002 | Brand: SparkFun

This is your tried and true white solderless breadboard. It has 2 power buses, 10 columns, and 30 rows - a total of 400 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separa...

SKU: AF-4747 | Brand: Adafruit

If you've got a lot of wire-stripping to do, you may want to try out an automatic stripper/cutter! They are fantastic for stripping and cutting stranded and solid-core 24 or thicker AWG wires and ribbon cables. The...

SKU: AF-3859 | Brand: Adafruit

A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with porta...

SKU: AF-1592 | Brand: Adafruit

A set of 12 short alligator clip test leads for making quick temporary connections without soldering. Each lead has a vinyl-covered alligator clip on both ends, colour-coded across six colours for easy circuit identif...

SKU: AF-449 | Brand: Adafruit

This 8×AA battery holder provides a portable 12V power source by connecting 8 AA batteries end-to-end in series. It delivers approximately 12VDC with alkaline cells (9.6V with NiMH rechargeables) and supports up to 2A...

SKU: SF-PRT-12978 | Brand: SparkFun

A pack of 10 multicoloured alligator-to-alligator clip test leads — an essential for any electronics workbench. Whether you're making quick connections to test a circuit or extending your multimeter leads, these sprin...

SKU: SF-PRT-12615 | Brand: SparkFun

A standard full-size solderless breadboard with 830 tie points for prototyping electronic circuits. The two sets of five columns are separated by a 0.3″ channel — perfectly sized for straddling DIP IC packages. Split ...

SKU: LB-LS7240-H | Brand: Little Bird

Introducing the perfect solution for prototyping - our Half-size Permanent Solder Breadboard PCB! With this board, you can easily transfer your circuit from a solderless breadboard to a more permanent solution wi...

SKU: EF-EF10095 | Brand: ElecFreaks

A 2×AA battery holder designed specifically for the BBC micro:bit. The built-in JST PH connector plugs directly into the micro:bit's battery socket, and the integrated on/off switch with a secure cover provides safe, ...

SKU: AF-1699 | Brand: Adafruit

Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack with disconnect-switches on Left and Right channels as well as a center ground pin. You can use any 3.5mm...

SKU: SF-PRT-12083 | Brand: SparkFun

This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...

SKU: SF-PRT-11892 | Brand: SparkFun

Now for all of your coin cell battery surface mount needs, the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connect...

SKU: AF-239 | Brand: Adafruit

This is a 'full-size' breadboard, 830 tie points. Good for small and medium projects. It's 2.2" x 7" (5.5 cm x 17 cm) with a standard double-strip in the middle and two power rails on both sides. You can pull the powe...

SKU: DF-FIT0365 | Brand: DFRobot

 INTRODUCTION Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in length. Each pack comes with 30 jumper wires in a...

SKU: SF-PRT-10897 | Brand: SparkFun

These are 155mm long jumpers terminated as male to male. Use these to jumper from any female header on any board, to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header. Com...

SKU: SF-TOL-12966 | Brand: SparkFun

The digital multimeter (DMM) is an essential tool in every electronic enthusiasts arsenal. The SparkFun Digital Multimeter, however, is not your average multimeter, it features a loud continuity sound, current/voltage...

SKU: LB-LR0178-350 | Brand: Little Bird

SKU: DF-FIT0610 | Brand: DFRobot

This enclosed battery holder takes 3× AA batteries in series, providing approximately 4.5V from alkaline cells or 3.6V from NiMH/NiCd rechargeables. It features a built-in on/off switch and a sliding, removable cover ...

SKU: AF-4193 | Brand: Adafruit

A slim 2×AA battery holder with a built-in on/off switch and genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and p...