Breakouts

SKU: KI-5601B | Brand: Kitronik

The Edge Connector Breakout Board for the BBC micro:bit provides easy access to all of the processor pins on the micro:bit's edge connector. Pre-built with pin headers already soldered, it's ready to use straight out ...

SKU: AF-2305 | Brand: Adafruit

The Adafruit DRV2605L Haptic Motor Controller is a dedicated driver for haptic feedback motors, controlled via I2C. Rather than simple on/off control, the TI DRV2605L chip offers a library of over 100 built-in vibrati...

SKU: SF-COM-09312 | Brand: SparkFun

The US1881 is a latching Hall effect sensor in a TO-92 package. When exposed to a magnetic field above the operating threshold, the open-collector output latches LOW and stays there until a reversed magnetic field pul...

SKU: AF-2890 | Brand: Adafruit

This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are two! The magic of the Doubler comes when stacking a Feather ...

SKU: SF-BOB-00716 | Brand: SparkFun

RJ45 connectors are the kind that are used for Ethernet jacks, but they make great general purpose connectors when you need a lot of conductors. This is a small PCB that brings out the pins of the RJ45 connector to an...

SKU: AF-158 | Brand: Adafruit

Hall effect sensors detect whether a magnet is near. Useful for non-contact/waterproof type switches, position sensors, rotary/shaft encoders. I tried dozens of different hall effect sensors to see which one wou...

SKU: AF-3328 | Brand: Adafruit

The Adafruit PT100 RTD Temperature Sensor Amplifier is a breakout board for the MAX31865 precision RTD-to-digital converter. It reads 2-, 3-, or 4-wire PT100 platinum resistance temperature detectors over SPI, deliver...

SKU: AF-3435 | Brand: Adafruit

The Adafruit TPL5110 Low Power Timer Breakout turns any electronics project into a low-power system by periodically switching power on and off. Connect it between your power supply and your project, and the TPL5110 wi...

SKU: AF-757 | Brand: Adafruit

This bi-directional logic level converter from Adafruit uses 4× BSS138 FETs with 10K pull-up resistors to safely shift signals between different voltage levels. Unlike many level shifters, this design is fully compati...

SKU: DF-DFR0071 | Brand: DFRobot

The DFRobot SD Module (DFR0071) is a breakout board that adds standard SD and Micro SD (TF) card storage to your Arduino projects. Use it for data logging, file storage, and transferring data between your microcontrol...

SKU: PR-PIM375 | Brand: Little Bird

A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/...

SKU: AF-5708 | Brand: Adafruit

The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. Th...

SKU: DF-DFR0971 | Brand: DFRobot

This 2-Channel I2C DAC module can output a voltage of 0-10V, which is a standard driver in industrial applications. It can be widely used with most 0-10V devices on markets such as light controllers, inverters, valves...

SKU: DF-SEN0529 | Brand: DFRobot

BMM150 is a low-power and low-noise 3-axis geomagnetic sensor from Bosch for compass applications. It allows measurements of the magnetic field and compass angle in three perpendiculars within a measuring range of ±13...

SKU: AF-5643 | Brand: Adafruit

The Adafruit SPI FLASH Breakout features a W25Q128 chip providing 128 Mbit (16 MByte) of non-volatile flash storage over a standard SPI interface. It's ideal for adding compact, low-power external storage to microcont...

SKU: AF-4479 | Brand: Adafruit

The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring ...

SKU: AF-5190 | Brand: Adafruit

The Adafruit SCD-41 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air with a wide measurement range of 400 to 5,000 ppm. It also includes integrated temperature and ...

SKU: SF-BOB-16446 | Brand: SparkFun

The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and...

SKU: DF-SEN0414 | Brand: DFRobot

The SHTC3 digital humidity sensor from Sensirion builds on the success of the proven SHTC1 sensor and offers consistent high accuracy within the measuring range. The sensor covers a humidity measurement range of 0 to ...

SKU: AF-4755 | Brand: Adafruit

The Adafruit Universal USB/DC/Solar Lithium Ion/Polymer Charger (bq24074) charges 3.7V/4.2V LiPo or LiIon batteries from virtually any power source — USB Type-C, DC adapter, or solar panel — with a wide 5–10V input ra...