Breakouts

SKU: SF-BOB-16998 | Brand: SparkFun

Add a reversible USB-C connector to your project without hand-soldering the tiny SMD pads. This horizontal breakout makes it easier to bring USB-C power and data connections onto a prototype or custom build.The board ...

SKU: SF-BOB-29195 | Brand: SparkFun

This compact breakout board makes it easy to work with a male DE9 connector, commonly referred to as DB9. It brings the connector out to a maker-friendly plated through-hole header, so you can wire it into prototypes,...

SKU: SF-SEN-29528 | Brand: SparkFun

Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, o...

SKU: SF-SEN-29854 | Brand: SparkFun

This breakout brings secure fingerprint authentication to embedded projects while keeping the complex biometric work on the sensor itself. Built around the FPC2534 from Fingerprint Cards AB, it handles enrolment, encr...

SKU: SF-LCD-13722 | Brand: SparkFun

Add a tiny, crisp OLED to your next microcontroller project without taking up much space. This breakout carries a monochrome Blue-on-Black display that is only 64 pixels wide by 48 pixels tall, yet still has room for ...

SKU: SF-TOL-20680 | Brand: SparkFun

Keep an eye on your single-cell LiPo battery before your project suddenly runs out of power. This compact fuel gauge board sits in circuit with your battery and reports the relative state of charge using the MAX17043 ...

SKU: SF-WRL-21293 | Brand: SparkFun

Build low-power 2.4GHz Bluetooth beacon prototypes with this compact breakout based on the InPlay IN100 NanoBeacon. It is designed for wireless sensor monitoring, asset tracking, retail beacons and DIY beacon tags for...

SKU: SF-SEN-25200 | Brand: SparkFun

Build a detailed indoor air monitor with this Qwiic combo board, pairing Sensirion’s SCD41 CO2 sensor with the SEN55 environmental sensor node. Together they measure CO2, volatile organic compounds (VOCs), particulate...

SKU: SF-COM-27925 | Brand: SparkFun

Keep your project powered through power-supply hot swaps with this compact ideal diode breakout from SparkFun. It provides reliable one-way voltage control for dynamic power selection and switchover, over-voltage prot...

SKU: SF-SEN-30480 | Brand: SparkFun

This capacitive soil moisture breakout is designed for plant monitoring projects where exposed metal probes can corrode after time in the dirt. It measures moisture using a capacitive plate embedded in the board, mana...

SKU: DF-DFR1250 | Brand: DFRobot

Introduction The LattePanda IOTA M.2 M-Key Expansion Board is a dedicated interface adapter designed to unlock the full potential of the LattePanda IOTA single-board computer . It functions by converting the board's n...

SKU: DF-SEN0666 | Brand: DFRobot

This compact Fermion breakout brings the Bosch BMP585 MEMS pressure and temperature sensor to a tiny board for projects where space, power use and reliable environmental sensing matter. It measures barometric pressure...

SKU: DF-SEN0663 | Brand: DFRobot

This ultra-compact particulate matter sensor breakout is built around the Bosch BMV080 sensing unit, using laser-based light scattering with a fanless measurement principle. It can monitor PM1, PM2.5 and PM10 mass con...

SKU: DF-SEN0667 | Brand: DFRobot

This compact Fermion module is built around Bosch Sensortec’s BMP581 high-performance barometric pressure sensor chip. It measures pressure and temperature with high precision, offering ±0.3 hPa typical absolute press...

SKU: SF-DEV-27876 | Brand: SparkFun

The Br V2 is a simple breakout board for Alchitry boards, making the signal pins on the Alchitry headers easier to access for prototyping, wiring and soldered projects.All signal pins are brought out to 0.1" easy-to-s...

SKU: SF-DEV-27880 | Brand: SparkFun

The Ft V2 is designed for Alchitry projects that need to move a lot of data in or out of a design. It is built around the FT600Q, which is capable of up to 200MB/s.In real-world use, bandwidth will be a little lower; ...

SKU: SF-DEV-27877 | Brand: SparkFun

The Br V2 is a breakout board for Alchitry headers, giving you access to all the signal pins through solder-friendly 0.1" holes. It is designed to make wiring, prototyping and adding your own circuitry easier when wor...

SKU: SF-DEV-14008 | Brand: SparkFun

This breakout board makes it easier to build a custom wireless controller for XBee-based projects, without relying on a standard hobby RC transmitter. It is designed for makers who want to choose their own control lay...

SKU: SF-BOB-29197 | Brand: SparkFun

This compact breakout makes it straightforward to connect 3.3V microcontroller projects to legacy RS232 serial equipment such as older computers, industrial machines, GPS modules and other devices using a DE9, also kn...

SKU: SF-BOB-17110 | Brand: SparkFun

USB-C is handy for modern projects, but its 24 tiny, tightly spaced pins are not friendly to hand soldering or quick prototyping. This breakout board routes the essential USB-C connections out to a standard 0.1" (2.54...