Breakouts

SKU: AF-5840 | Brand: Adafruit

This breakout makes it much easier to work with the OV5640 image sensor on capable microcontroller platforms. It combines a 5 Megapixel OV5640 camera with a 72-degree non-distorting lens, autofocus motor, and the supp...

SKU: AF-5635 | Brand: Adafruit

When an SD card is overkill, this small board gives your microcontroller project a handy chunk of non-volatile storage for files, images, fonts, audio clips and other data. It uses a W25Q16 flash chip, providing 16 Mb...

SKU: SF-GPS-15005 | Brand: SparkFun

Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK...

SKU: SF-BOB-16998 | Brand: SparkFun

Add a reversible USB-C connector to your project without hand-soldering the tiny SMD pads. This horizontal breakout makes it easier to bring USB-C power and data connections onto a prototype or custom build.The board ...

SKU: SF-BOB-29195 | Brand: SparkFun

This compact breakout board makes it easy to work with a male DE9 connector, commonly referred to as DB9. It brings the connector out to a maker-friendly plated through-hole header, so you can wire it into prototypes,...

SKU: SF-SEN-29528 | Brand: SparkFun

Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, o...

SKU: SF-SEN-29854 | Brand: SparkFun

This breakout brings secure fingerprint authentication to embedded projects while keeping the complex biometric work on the sensor itself. Built around the FPC2534 from Fingerprint Cards AB, it handles enrolment, encr...

SKU: SF-LCD-13722 | Brand: SparkFun

Add a tiny, crisp OLED to your next microcontroller project without taking up much space. This breakout carries a monochrome Blue-on-Black display that is only 64 pixels wide by 48 pixels tall, yet still has room for ...

SKU: SF-TOL-20680 | Brand: SparkFun

Keep an eye on your single-cell LiPo battery before your project suddenly runs out of power. This compact fuel gauge board sits in circuit with your battery and reports the relative state of charge using the MAX17043 ...

SKU: SF-WRL-21293 | Brand: SparkFun

Build low-power 2.4GHz Bluetooth beacon prototypes with this compact breakout based on the InPlay IN100 NanoBeacon. It is designed for wireless sensor monitoring, asset tracking, retail beacons and DIY beacon tags for...

SKU: SF-SEN-25200 | Brand: SparkFun

Build a detailed indoor air monitor with this Qwiic combo board, pairing Sensirion’s SCD41 CO2 sensor with the SEN55 environmental sensor node. Together they measure CO2, volatile organic compounds (VOCs), particulate...

SKU: SF-COM-27925 | Brand: SparkFun

Keep your project powered through power-supply hot swaps with this compact ideal diode breakout from SparkFun. It provides reliable one-way voltage control for dynamic power selection and switchover, over-voltage prot...

SKU: SF-BOB-29196 | Brand: SparkFun

This compact breakout board makes it easy to bring a female DE9 connector, often called DB9, onto a breadboard or into a custom wiring harness.All nine connector pins are broken out to 0.1in-spaced plated through-hole...

SKU: SF-SEN-30183 | Brand: SparkFun

This compact digital compass module is built around the HMC6343, a fully integrated electronic compass designed to deliver reliable heading data without making your main microcontroller do all the processing.Unlike ba...

SKU: SF-SEN-30480 | Brand: SparkFun

This capacitive soil moisture breakout is designed for plant monitoring projects where exposed metal probes can corrode after time in the dirt. It measures moisture using a capacitive plate embedded in the board, mana...

SKU: DF-DFR1250 | Brand: DFRobot

Introduction The LattePanda IOTA M.2 M-Key Expansion Board is a dedicated interface adapter designed to unlock the full potential of the LattePanda IOTA single-board computer . It functions by converting the board's n...

SKU: DF-SEN0666 | Brand: DFRobot

This compact Fermion breakout brings the Bosch BMP585 MEMS pressure and temperature sensor to a tiny board for projects where space, power use and reliable environmental sensing matter. It measures barometric pressure...

SKU: DF-SEN0663 | Brand: DFRobot

This ultra-compact particulate matter sensor breakout is built around the Bosch BMV080 sensing unit, using laser-based light scattering with a fanless measurement principle. It can monitor PM1, PM2.5 and PM10 mass con...

SKU: DF-SEN0667 | Brand: DFRobot

This compact Fermion module is built around Bosch Sensortec’s BMP581 high-performance barometric pressure sensor chip. It measures pressure and temperature with high precision, offering ±0.3 hPa typical absolute press...

SKU: SF-DEV-27876 | Brand: SparkFun

The Br V2 is a simple breakout board for Alchitry boards, making the signal pins on the Alchitry headers easier to access for prototyping, wiring and soldered projects.All signal pins are brought out to 0.1" easy-to-s...