Breakouts

SKU: SF-SEN-12784 | Brand: SparkFun

This is the SparkFun “Time-of-Flight” Range Finder, a breakout for the VL6180 distance sensor. Unlike most distance sensors that rely reflected light intensity or reflected angles to determine range, the VL6180 use...

SKU: SF-SEN-12785 | Brand: SparkFun

This is the SparkFun “Time-of-Flight” Range Finder, a sensor board for the VL6180 distance sensor. Unlike most distance sensors that rely on reflected light intensity or reflected angles to determine range, the VL6180...

SKU: AF-6014 | Brand: Adafruit

This compact breakout board is designed for the Raspberry Pi 5 and Adafruit RP2350 boards that use an HSTX connector. These boards use a 22-pin FPC connection to carry high-speed video data over differential pairs, an...

SKU: AF-5632 | Brand: Adafruit

This breakout makes it much easier to prototype with external QSPI flash on modern microcontroller platforms such as RP2040, ESP32, RT10xx and STM32 designs. It converts a wide 8-SOIC flash package into a breadboard-f...

SKU: AF-5633 | Brand: Adafruit

This breakout makes it much easier to prototype with external QSPI flash memory on modern microcontrollers such as the RP2040, ESP32, RT10xx and STM32 families. It adapts a wide 8-SOIC flash package to a neat 0.3" wid...

SKU: AF-5635 | Brand: Adafruit

When an SD card is overkill, this small board gives your microcontroller project a handy chunk of non-volatile storage for files, images, fonts, audio clips and other data. It uses a W25Q16 flash chip, providing 16 Mb...

SKU: SF-SEN-29528 | Brand: SparkFun

Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, o...

SKU: SF-SEN-29854 | Brand: SparkFun

This breakout brings secure fingerprint authentication to embedded projects while keeping the complex biometric work on the sensor itself. Built around the FPC2534 from Fingerprint Cards AB, it handles enrolment, encr...

SKU: SF-LCD-13722 | Brand: SparkFun

Add a tiny, crisp OLED to your next microcontroller project without taking up much space. This breakout carries a monochrome Blue-on-Black display that is only 64 pixels wide by 48 pixels tall, yet still has room for ...

SKU: SF-SEN-30183 | Brand: SparkFun

This compact digital compass module is built around the HMC6343, a fully integrated electronic compass designed to deliver reliable heading data without making your main microcontroller do all the processing.Unlike ba...

SKU: DF-SEN0666 | Brand: DFRobot

This compact Fermion breakout brings the Bosch BMP585 MEMS pressure and temperature sensor to a tiny board for projects where space, power use and reliable environmental sensing matter. It measures barometric pressure...

SKU: DF-SEN0663 | Brand: DFRobot

This ultra-compact particulate matter sensor breakout is built around the Bosch BMV080 sensing unit, using laser-based light scattering with a fanless measurement principle. It can monitor PM1, PM2.5 and PM10 mass con...

SKU: DF-SEN0667 | Brand: DFRobot

This compact Fermion module is built around Bosch Sensortec’s BMP581 high-performance barometric pressure sensor chip. It measures pressure and temperature with high precision, offering ±0.3 hPa typical absolute press...

SKU: SF-BOB-29197 | Brand: SparkFun

This compact breakout makes it straightforward to connect 3.3V microcontroller projects to legacy RS232 serial equipment such as older computers, industrial machines, GPS modules and other devices using a DE9, also kn...

SKU: SF-SEN-15191 | Brand: SparkFun

This Qwiic RFID reader breakout makes it much easier to add low-frequency 125kHz RFID scanning to a project. It is designed for ID Innovations ID-3LA, ID-12LA and ID-20LA reader modules, converting the module output i...

SKU: SF-SEN-20659 | Brand: SparkFun

Add 3-axis motion sensing to your project with this LIS3DH accelerometer breakout from SparkFun. The LIS3DH is a low-power, capacitive micro-machined accelerometer with 12 bits of resolution, suitable for detecting tr...

SKU: AF-5841 | Brand: Adafruit

This breakout makes it easier to add a camera module to capable hobby microcontrollers without needing a full computer or FPGA. It uses an OV5640 camera with a 5 Megapixel sensor element and a very-wide 160-degree fis...

SKU: AF-6049 | Brand: Adafruit

Add digital audio input to a capable microcontroller or single-board computer with this tiny breakout for the TDK ICS43434 I2S MEMS microphone. MEMS microphones detect sound like classic electret mics, but are much sm...

SKU: AF-6365 | Brand: Adafruit

This compact breakout adds a 4-pin JST SH connector to a Raspberry Pi or compatible board, giving you a quick STEMMA QT/Qwiic connection for I2C sensors and devices. The 2x3 socket plugs onto the Pi’s I2C and power pi...

SKU: AF-5634 | Brand: Adafruit

This breakout makes it easier to prototype with external QSPI flash memory, as used by many modern microcontrollers such as RP2040, ESP32, RT10xx and STM32 series devices. It carries a W25Q128JVSSIQ flash chip, giving...