Breakouts

SKU: DF-FIT0849 | Brand: DFRobot

This Ethernet RJ45 Female Plug to 8-Pin Terminal Block provides a solder-free way to break out an RJ45 Ethernet connection to individual screw terminals. The standard RJ45 port features a metal shielding layer for ele...

SKU: AF-5180 | Brand: Adafruit

This Simple USB Type C breakout is kinda interesting, it looks similar to this USB Type C SMT Inline Breakout Board, but it's an 'inline' style with pads for soldering to the common USB 1.1/2.0 connections. We se...

SKU: DF-FIT0720 | Brand: DFRobot

These patch test hooks provide a solderless way to make signal and low-current connections between boards, sensors, and modules. The hook clips grab onto pins, pads, and component legs — perfect for prototyping with c...

SKU: AF-5764 | Brand: Adafruit

The Adafruit TRRS Jack Breakout Board provides easy access to all four contacts of a 3.5mm TRRS (Tip-Ring-Ring-Sleeve) audio jack — commonly used for stereo audio plus a microphone channel, as found on mobile phone he...

SKU: EF-EF11096 | Brand: ElecFreaks

Specially designed to connect to seeed studio sensors, seeed Sudio sensors can be used on sensor:bit, octopus:bit, Wukong or other expansion boards. Only ordinary seeed studio sensors can be connected, IIC devices ...

SKU: LB-00053 | Brand: Little Bird

A simple breakout board for XBee modules that brings all 20 pins out to standard 0.1″ (2.54 mm) dual-row headers. The 0.5″ spacing between header rows makes it breadboard DIP-friendly for easy prototyping. Key Featur...

SKU: AF-1863 | Brand: Adafruit

This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are soldered onto a breadboard-friendl...

SKU: SF-BOB-12700 | Brand: SparkFun

This simple breakout board routes a female USB Type-A connector's VCC, GND, D−, and D+ pins to a standard 0.1″ pitch header. It saves you the hassle of soldering tiny SMD connectors when adding USB host or device conn...

SKU: SF-BOB-10031 | Brand: SparkFun

We have no idea what USB device you are hooking up to, but if you want to access the microUSB port on something, you might want this. We broke out all 5 pins with a vertical microUSB connector for your prototyping nee...

SKU: AF-5625 | Brand: Adafruit

The Adafruit Qwiic / STEMMA QT 5-Port Hub is a passive I2C splitter that lets you connect up to five STEMMA QT or Qwiic devices in a star topology instead of a long daisy chain. This reduces I2C line capacitance and g...

SKU: AF-4396 | Brand: Adafruit

This USB Type C breakout is kinda interesting, it looks similar to our right angle USB C socket breakout, but it's an 'inline' style with pads for soldering to the connections. We think it could be handy for making cu...

SKU: LB-JSTBOARD | Brand: Little Bird

This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply coppe...

SKU: SF-BOB-12035 | Brand: SparkFun

Add a Micro-B USB connector to your project without the hassle of soldering tiny SMD pads. This compact breakout board routes all five pins — VCC, GND, ID, D−, and D+ — to a standard 0.1" pitch header for easy breadbo...

SKU: SF-DEV-09873 | Brand: SparkFun

The SparkFun FTDI Basic Breakout provides USB-to-serial conversion using the FTDI FT232RL IC, operating at 3.3V logic levels. Its 6-pin header matches the standard FTDI pinout, making it compatible with Arduino Pro, L...

SKU: DF-DFR0077 | Brand: DFRobot

This converter uses MAX202-based level shifter for converting TTL (Transistor-Transistor Logic) -level serial to standard RS232 serial.RS232 is widely used in radio modifications,phone flash, XBOX360 flash, GPS, vehic...

SKU: WS-25411 | Brand: Waveshare

USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Protection Circuits, Multiple Systems Support, Aluminum Alloy Case, Wall-mount & Rail-mount Support ...

SKU: DF-FIT0852 | Brand: DFRobot

This DIN Rail RJ45 Terminal Block Adapter-Horizontal, perfect for simplifying complex wiring, consists of an RJ45 Ethernet jack and an eight-port terminal. You can connect an RJ45 Ethernet to PCB which can be DIN rai...

SKU: AF-4437 | Brand: Adafruit

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect a 2x20 IDC cable to this very PCB, which ca...

SKU: AF-2029 | Brand: Adafruit

The Raspberry Pi B+/Pi 2/ Pi 3 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our ...

SKU: AF-3119 | Brand: Adafruit

This HDMI plug breakout board lets you create custom HDMI cables or tap into individual HDMI pins for specialised wiring setups. The solid PCB features an HDMI plug with through-hole pads for soldering your own connec...