Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
Adafruit SCD-41 - True CO2 Temperature and Humidity Sensor
SKU: AF-5190 | Brand: Adafruit
The Adafruit SCD-41 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air with a wide measurement range of 400 to 5,000 ppm. It also includes integrated temperature and ...
Delivered by Tue 25 Aug
Fermion: SHTC3 Temperature & Humidity Sensor (Breakout)
SKU: DF-SEN0414 | Brand: DFRobot
The SHTC3 digital humidity sensor from Sensirion builds on the success of the proven SHTC1 sensor and offers consistent high accuracy within the measuring range. The sensor covers a humidity measurement range of 0 to ...
Delivered by Tue 25 Aug
Gravity: MCP23017 IIC 16 Digital IO Expansion Module
SKU: DF-DFR0626 | Brand: DFRobot
This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module, the microcontroller can connect 8 modules, and expand ...
Delivered by Tue 25 Aug
Micro:bit Breakout Board ( Octopus:bit)
SKU: EF-EF03405 | Brand: ElecFreaks
The Octopus:bit is a breakout board for the BBC micro:bit that extends all GPIO ports (P0–P16, P19–P20) into colour-coded pin headers with VCC and GND alongside each I/O pin. This makes connecting sensors, servos, and...
Delivered by Tue 25 Aug
JST-PH 2-Pin SMT Right Angle Breakout Board
SKU: AF-1862 | Brand: Adafruit
A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin ...
Delivered by Tue 25 Aug
IR Receiver Diode - TSOP38238
SKU: SF-SEN-10266 | Brand: SparkFun
Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes. The...
Delivered by Tue 25 Aug
Adafruit I2C Stemma QT Rotary Encoder Breakout with Encoder
SKU: AF-5880 | Brand: Adafruit
The Adafruit I2C STEMMA QT Rotary Encoder Breakout comes with a 24-detent rotary encoder with push-switch pre-soldered, so you can start twisting right away. An onboard microcontroller running Adafruit's seesaw firmwa...
Delivered by Tue 25 Aug
Fermion: MEMS Methane CH4 Gas Detection Sensor (Breakout, 1-10000ppm)
SKU: DF-SEN0565 | Brand: DFRobot
Fermion: MEMS Methane CH4 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...
Delivered by Tue 25 Aug
Fermion: AHT20 Temperature and Humidity Sensor (Breakout)
SKU: DF-SEN0527 | Brand: DFRobot
The Fermion AHT20 is a high-precision, low-cost temperature and humidity sensor breakout from DFRobot. Built around an improved MEMS semiconductor capacitive humidity sensor element, it communicates over a standard I2...
Delivered by Tue 25 Aug
Adafruit Right Angle VEML7700 Lux Sensor - I2C Light Sensor
SKU: AF-5378 | Brand: Adafruit
The Adafruit Right Angle VEML7700 Lux Sensor is an I2C ambient light sensor that measures calibrated lux values rather than arbitrary brightness numbers. Its unique right-angle orientation senses light coming parallel...
Delivered by Tue 25 Aug
Adafruit ANO Rotary Navigation Encoder Breakout PCB
SKU: AF-5221 | Brand: Adafruit
This breakout PCB converts the ANO rotary navigation encoder's non-standard pinout into a straightforward, breadboard-friendly header strip. The ANO encoder combines a rotary encoder with directional and centre-push b...
Delivered by Tue 25 Aug
Gravity: IO Shield for FireBeetle M0 and ESP32-E
SKU: DF-DFR0762 | Brand: DFRobot
Specially designed for FireBeetle 2 series (M0, ESP32-E), this Gravity IO expansion shield offers various ports including digital, analog, I2C, UART, SPI, etc. Also, it comes with power input socket for connecting ext...
Delivered by Tue 25 Aug
Adafruit PMSA003I Air Quality Breakout - STEMMA QT / Qwiic
SKU: AF-4632 | Brand: Adafruit
The Adafruit PMSA003I Air Quality Breakout is a compact laser-scattering particulate matter sensor with an I2C interface — a significant advantage over the UART-based sensors that dominate this category. Simply connec...
Delivered by Tue 25 Aug
SparkFun Qwiic SHIM for Raspberry Pi
SKU: SF-DEV-15794 | Brand: SparkFun
The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. The SHIM design allows you to plug directly to the Pi's I2C bus with no soldering...
Delivered by Tue 25 Aug
Relay for micro:bit
SKU: PI-MNK00061 | Brand: Pimoroni
The MonkMakes Relay for micro:bit is a solid-state (no moving parts) relay that allows an output of a micro:bit to turn things on and off. A micro:bit can turn an LED on and off directly, but anything more power...
Delivered by Tue 25 Aug
Gravity: Digital 1-to-8 I2C Multiplexer
SKU: DF-DFR0576 | Brand: DFRobot
The Gravity I2C Multiplexer solves address conflicts when you need to connect multiple I²C devices that share the same fixed address. It provides eight independent I²C ports on a single bus, allowing up to eight ident...
Delivered by Tue 25 Aug
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
SKU: AF-2448 | Brand: Adafruit
The Adafruit TB6612 Breakout is a compact dual H-bridge motor driver that can spin two DC motors bidirectionally, step one bipolar or unipolar stepper, or fire two solenoids — all at up to 1.2A continuous per channel ...
Delivered by Tue 25 Aug
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055
SKU: AF-2472 | Brand: Adafruit
The Adafruit BNO055 breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion — no complex algorithms to write yourself. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer on...
Delivered by Tue 25 Aug
SparkFun RJ11 Breakout
SKU: SF-BOB-14021 | Brand: SparkFun
This is the SparkFun RJ11 Breakout, two simple breakout boards for the common 6-pin RJ11 connector. These little boards can easily have one of our RJ11 6-Pin Connectors to work with common telephone cables. Each bo...
Delivered by Tue 25 Aug
2mm 10pin XBee Socket
SKU: SF-PRT-08272 | Brand: SparkFun
This 2 mm pitch 10-pin socket mates with XBee radio modules from Digi, allowing you to mount your XBee without soldering it directly to a PCB. You'll need two of these sockets to connect to all 20 pins on an XBee modu...
Delivered by Tue 25 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
