Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
SD Module (Arduino Compatible)
SKU: DF-DFR0071 | Brand: DFRobot
The DFRobot SD Module (DFR0071) is a breakout board that adds standard SD and Micro SD (TF) card storage to your Arduino projects. Use it for data logging, file storage, and transferring data between your microcontrol...
Delivered by Fri 23 Oct
Adafruit CAN Pal - CAN Bus Transciever
SKU: AF-5708 | Brand: Adafruit
The Adafruit CAN Pal is a CAN bus transceiver breakout for microcontrollers that have a native CAN peripheral. It converts 3.3V logic-level CAN TX/RX signals to the differential signalling required for the CAN bus. Th...
Delivered by Fri 23 Oct
Gravity: BMM150 Triple Axis Magnetometer Sensor
SKU: DF-SEN0529 | Brand: DFRobot
BMM150 is a low-power and low-noise 3-axis geomagnetic sensor from Bosch for compass applications. It allows measurements of the magnetic field and compass angle in three perpendiculars within a measuring range of ±13...
Delivered by Fri 23 Oct
Adafruit Triple-axis Magnetometer - LIS3MDL
SKU: AF-4479 | Brand: Adafruit
The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring ...
Delivered by Fri 23 Oct
Adafruit SCD-41 - True CO2 Temperature and Humidity Sensor
SKU: AF-5190 | Brand: Adafruit
The Adafruit SCD-41 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air with a wide measurement range of 400 to 5,000 ppm. It also includes integrated temperature and ...
Delivered by Fri 23 Oct
JST-PH 2-Pin SMT Right Angle Breakout Board
SKU: AF-1862 | Brand: Adafruit
A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin ...
Delivered by Fri 23 Oct
IR Receiver Diode - TSOP38238
SKU: SF-SEN-10266 | Brand: SparkFun
Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes. The...
Delivered by Fri 23 Oct
Fermion: MEMS Methane CH4 Gas Detection Sensor (Breakout, 1-10000ppm)
SKU: DF-SEN0565 | Brand: DFRobot
Fermion: MEMS Methane CH4 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...
Delivered by Fri 23 Oct
Fermion: AHT20 Temperature and Humidity Sensor (Breakout)
SKU: DF-SEN0527 | Brand: DFRobot
The Fermion AHT20 is a high-precision, low-cost temperature and humidity sensor breakout from DFRobot. Built around an improved MEMS semiconductor capacitive humidity sensor element, it communicates over a standard I2...
Delivered by Fri 23 Oct
Adafruit ANO Rotary Navigation Encoder Breakout PCB
SKU: AF-5221 | Brand: Adafruit
This breakout PCB converts the ANO rotary navigation encoder's non-standard pinout into a straightforward, breadboard-friendly header strip. The ANO encoder combines a rotary encoder with directional and centre-push b...
Delivered by Fri 23 Oct
BNO055 Intelligent 9-axis Sensor Module
SKU: DF-SEN0374 | Brand: DFRobot
BNO055 is a new sensor IC for implementing an intelligent 9-axis Absolute Orientation Sensor. It is a System in Package, integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope, a triaxial geomagnetic...
Delivered by Fri 23 Oct
Gravity: Digital 1-to-8 I2C Multiplexer
SKU: DF-DFR0576 | Brand: DFRobot
The Gravity I2C Multiplexer solves address conflicts when you need to connect multiple I²C devices that share the same fixed address. It provides eight independent I²C ports on a single bus, allowing up to eight ident...
Delivered by Fri 23 Oct
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
SKU: AF-2448 | Brand: Adafruit
The Adafruit TB6612 Breakout is a compact dual H-bridge motor driver that can spin two DC motors bidirectionally, step one bipolar or unipolar stepper, or fire two solenoids — all at up to 1.2A continuous per channel ...
Delivered by Fri 23 Oct
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055
SKU: AF-2472 | Brand: Adafruit
The Adafruit BNO055 breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion — no complex algorithms to write yourself. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer on...
Delivered by Fri 23 Oct
SparkFun RJ11 Breakout
SKU: SF-BOB-14021 | Brand: SparkFun
This is the SparkFun RJ11 Breakout, two simple breakout boards for the common 6-pin RJ11 connector. These little boards can easily have one of our RJ11 6-Pin Connectors to work with common telephone cables. Each bo...
Delivered by Fri 23 Oct
2mm 10pin XBee Socket
SKU: SF-PRT-08272 | Brand: SparkFun
This 2 mm pitch 10-pin socket mates with XBee radio modules from Digi, allowing you to mount your XBee without soldering it directly to a PCB. You'll need two of these sockets to connect to all 20 pins on an XBee modu...
Delivered by Fri 23 Oct
Clipper LTE 4G Breakout (SP/CE)
SKU: PI-PIM716 | Brand: Pimoroni
Clipper lets you receive and transmit data over 4G LTE cellular networks - perfect for remote or mobile projects.WiFi is great, but sometimes you want your connected project to Just Work, wherever in the world it is. ...
Delivered by Fri 23 Oct
ELECFREAKS Wukong2040 Breakout Board For Raspberry Pi Pico
SKU: EF-EF02054 | Brand: ElecFreaks
DescriptionWukong 2040 is a multifunctional Breakout Board designed for Raspberry Pi Pico. In terms of functions, it is equipped with a buzzer, A\B buttons, rainbow lights, motor interface, reset button, etc., to meet...
Delivered by Fri 23 Oct
Adafruit Mini I2C Gamepad with seesaw - STEMMA QT / Qwiic
SKU: AF-5743 | Brand: Adafruit
The Adafruit Mini I2C Gamepad is a compact controller breakout with a 2-axis thumb joystick and 6 momentary buttons (4 large, 2 small), all communicating over I2C via the seesaw co-processor. It doesn't use any of you...
Delivered by Fri 23 Oct
Adafruit IoT Button with NeoPixel BFF Add-On for QT Py and Xiao
SKU: AF-5666 | Brand: Adafruit
The Adafruit IoT Button with NeoPixel BFF adds a chunky 12 mm tactile button and an RGB NeoPixel to any QT Py or Xiao development board. It's a quick way to build simple IoT button projects with visual feedback — pres...
Delivered by Fri 23 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
