Breakouts
Breakout boards make it easy to prototype with surface-mount ICs, sensors, displays, and interfaces by bringing tiny pins out to breadboard-friendly headers. Whether you're working with ADCs, OLEDs, TFT displays, or coin cell holders, our range has you covered.
Perfect for makers, students, and engineers across Australia — get your prototyping essentials delivered fast so you can spend more time building and less time waiting.
Pico - Dual-Expander IC Test Board
SKU: WS-19343 | Brand: Waveshare
A dual GPIO expander board for the Raspberry Pi Pico that duplicates all GPIO pins into two sets of 2×20 male headers. Plug your Pico into the centre female socket, then connect two expansion modules simultaneously — ...
Delivered by Tue 23 Jun
Adafruit Micro SD SPI or SDIO Card Breakout Board - 3V ONLY!
SKU: AF-4682 | Brand: Adafruit
The Adafruit Micro SD SPI or SDIO Card Breakout Board gives you fast microSD card access using either standard SPI or the higher-speed SDIO protocol. Unlike SPI-only breakouts, this board exposes the full SDIO bus wit...
Delivered by Tue 23 Jun
USB to TTL 4-pin Wire
SKU: WS-7965 | Brand: Waveshare
A USB to TTL serial adapter cable with an embedded PL2303 converter chip. This 1-metre cable provides a simple way to add serial communication to your projects, connecting a standard USB-A port to 3.3V TTL-level UART ...
Delivered by Tue 23 Jun
Assembled Pi T-Cobbler Plus - GPIO Breakout [Pi A+, B+, Pi 2, Pi 3, Zero]
SKU: AF-2028 | Brand: Adafruit
This is the assembled version of the Pi T-Cobbler Plus. It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector)The Raspberry Pi has landed on the Maker World like a 40...
Delivered by Tue 23 Jun
Pico - 10DOF-IMU IC Test Board
SKU: WS-19358 | Brand: Waveshare
A 10-DOF IMU sensor expansion board designed for the Raspberry Pi Pico. Combines a 9-axis ICM20948 motion sensor (gyroscope, accelerometer, magnetometer) with an LPS22HB barometric pressure sensor, all communicating o...
Delivered by Tue 23 Jun
RS232 To TTL Converter Module MAX3232
SKU: EC-CIN3232RT | Brand: Elecrow
This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....
Delivered by Tue 23 Jun
SparkFun Qwiic Adapter
SKU: SF-DEV-14495 | Brand: SparkFun
The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with you...
Delivered by Tue 23 Jun
Adafruit PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer
SKU: AF-5664 | Brand: Adafruit
Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer lets you connect up to four same-address I2C devices with completely solderless wiring. Five JST SH...
Delivered by Tue 23 Jun
Atmospheric Pressure Sensor Module
SKU: LB-24-ATMOS | Brand: Little Bird
A compact barometric pressure and temperature sensor module that communicates over I2C. Ideal for weather stations, altitude estimation, and environmental monitoring projects with micro:bit, Arduino, or other microcon...
Delivered by Tue 23 Jun
SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic)
SKU: SF-SEN-15335 | Brand: SparkFun
The SparkFun 9DoF IMU Breakout brings InvenSense's ICM-20948 9-axis motion tracking sensor to a Qwiic-enabled breakout board with an on-board logic level shifter and broken-out GPIO pins. The ICM-20948 is an extremely...
Delivered by Tue 23 Jun
Gravity: MCP23017 IIC 16 Digital IO Expansion Module
SKU: DF-DFR0626 | Brand: DFRobot
This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module, the microcontroller can connect 8 modules, and expand ...
Delivered by Tue 23 Jun
TCS34725 RGB Color Sensor For Arduino
SKU: DF-SEN0212 | Brand: DFRobot
The TCS34725 is an I2C RGB colour sensor that detects the red, green, and blue components of light in its environment and returns digital colour values. With high sensitivity, a wide dynamic range, and a built-in IR b...
Delivered by Tue 23 Jun
Gravity: IO Shield for FireBeetle M0 and ESP32-E
SKU: DF-DFR0762 | Brand: DFRobot
Specially designed for FireBeetle 2 series (M0, ESP32-E), this Gravity IO expansion shield offers various ports including digital, analog, I2C, UART, SPI, etc. Also, it comes with power input socket for connecting ext...
Delivered by Tue 23 Jun
ELECFREAKS Wukong2040 Breakout Board For Raspberry Pi Pico
SKU: EF-EF02054 | Brand: ElecFreaks
DescriptionWukong 2040 is a multifunctional Breakout Board designed for Raspberry Pi Pico. In terms of functions, it is equipped with a buzzer, A\B buttons, rainbow lights, motor interface, reset button, etc., to meet...
Delivered by Tue 23 Jun
Adafruit VL53L4CX Time of Flight Distance Sensor - ~1 to 6000mm
SKU: AF-5425 | Brand: Adafruit
The Adafruit VL53L4CX is the longest-range Time-of-Flight (ToF) distance sensor in ST's VL5 series, measuring from approximately 1 mm up to 6000 mm (6 metres). It uses an invisible laser to precisely time how long lig...
Delivered by Tue 23 Jun
TPS62827 3.3V Buck Converter Breakout - 3.3V Output 2 Amp Max
SKU: AF-4920 | Brand: Adafruit
This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. It's great for supplying power to hungry 3.3V voltage circuits from a range o...
Delivered by Tue 23 Jun
High Power 100mW 2.4G Wireless Transceiver Module RF Communication NRF24L01P+PA
SKU: EC-CRF19969D | Brand: Elecrow
AS01-ML01DP5 is a 2.4GHZ100mW, high speed (maximum air speed up to 2Mbps) high stability, industrial grade wireless transceiver integrated digital transmission module. Module uses nRF24L01P RF chip and RFX2401C power ...
Delivered by Tue 23 Jun
Adafruit VL53L0X Time of Flight Distance Sensor - ~30 to 1000mm
SKU: AF-3317 | Brand: Adafruit
The Adafruit VL53L0X is a Time-of-Flight (ToF) distance sensor from ST that uses an invisible laser to measure distances from approximately 50 mm to 1200 mm. By timing how long the laser light takes to bounce back, it...
Delivered by Tue 23 Jun
SparkFun 6DoF IMU Breakout - BMI270 (Qwiic)
SKU: SF-SEN-22397 | Brand: SparkFun
The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope wit...
Delivered by Tue 23 Jun
AP3429A 3.3V Buck Converter Breakout - 3.3V Output 1.2A Max
SKU: AF-4711 | Brand: Adafruit
The AP3429A Buck Converter Breakout steps down 3.4–5.5V input to a stable 3.3V output at up to 1.2A, with 90–95% efficiency. It's ideal for powering 3.3V circuits from LiPo batteries, 3× alkaline cells, or USB power s...
Delivered by Tue 23 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
