Breakouts

SKU: LB-24-LIGHT | Brand: Little Bird

Light-dependent resistors are electronic components whose resistance changes with light intensity. They are also called LDRs, photoresistors, or photoconductors.   It has four pins:3.3V  : While 'VCC'...

SKU: WS-19343 | Brand: Waveshare

A dual GPIO expander board for the Raspberry Pi Pico that duplicates all GPIO pins into two sets of 2×20 male headers. Plug your Pico into the centre female socket, then connect two expansion modules simultaneously — ...

SKU: PR-PIM300 | Brand: Little Bird

The Pico HAT Hacker is an ultra-thin breakout board that gives you full access to all 40 GPIO pins on your Raspberry Pi. At just 0.8 mm thick, it solders directly onto the Pi's header pins while leaving enough pin hei...

SKU: DF-DFR0626 | Brand: DFRobot

This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module, the microcontroller can connect 8 modules, and expand ...

SKU: DF-DFR0762 | Brand: DFRobot

Specially designed for FireBeetle 2 series (M0, ESP32-E), this Gravity IO expansion shield offers various ports including digital, analog, I2C, UART, SPI, etc. Also, it comes with power input socket for connecting ext...

SKU: EF-EF02054 | Brand: ElecFreaks

DescriptionWukong 2040 is a multifunctional Breakout Board designed for Raspberry Pi Pico. In terms of functions, it is equipped with a buzzer, A\B buttons, rainbow lights, motor interface, reset button, etc., to meet...

SKU: AF-5945 | Brand: Adafruit

The Adafruit PiCowbell OV5640 Camera Breakout with Autofocus (72°) adds a 5-megapixel camera with a standard 72-degree non-distorting lens and autofocus motor to your Raspberry Pi Pico or Pico W. The narrower field of...

SKU: DF-DFR0913 | Brand: DFRobot

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrolle...

SKU: AF-5907 | Brand: Adafruit

The Adafruit Terminal PiCowbell with Pre-Soldered Sockets gives your Raspberry Pi Pico or Pico W instant plug-and-play access to every GPIO pin via screw terminal blocks. Simply plug in your Pico and connect 18–26 AWG...

SKU: LB-COCKATOO | Brand: Little Bird

The Cockatoo is a simple screw-terminal breakout board for the BBC micro:bit. Slide your micro:bit into the edge connector and you get secure screw terminal access to pins 0, 1, 2, 3.3V, and GND — no soldering or croc...

SKU: SF-DEV-17047 | Brand: SparkFun

The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...

SKU: PR-PIM171 | Brand: Little Bird

A handy breakout tool that lets you access all 40 GPIO pins while a HAT or pHAT is connected to your Raspberry Pi. Plug in your HAT, connect the ribbon cable to your Pi, and probe, debug, or extend any pin with ease. ...

SKU: AF-5906 | Brand: Adafruit

The Adafruit Proto Doubler PiCowbell gives your Raspberry Pi Pico or Pico W two side-by-side socket slots — plug in your Pico on one side and a PiCowbell accessory on the other, no soldering or stacking headers requir...

SKU: SF-COM-23979 | Brand: SparkFun

Does your microcontroller need to control a high-voltage item, like a 12V LED strip, while also needing to be powered? Do you want to avoid having multiple power adapters and microcontrollers for your project? The MOS...

SKU: WS-14513 | Brand: Waveshare

An edge connector expansion board for the BBC micro:bit that breaks out all I/O pins to standard 2.54mm pitch pin headers for easy breadboard and jumper wire connections. Key Features Full Pin Breakout – All micro:...

SKU: SF-PRT-14765 | Brand: SparkFun

The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level tran...

SKU: LB-COCKATOO-V2 | Brand: Little Bird

The Cockatoo v2 is a simple breakout board for the BBC micro:bit, designed for school projects involving basic lighting circuits. Slide the micro:bit into the edge connector and access three pins — Pin 2, 3.3 V, and G...

SKU: AF-1323 | Brand: Adafruit

Turbo-charge your mbed LPC1769 dev board with this compact but feature-full application board. Fully assembled, just plug in your mbed and you will be ready to rock.Featuring: 128x32 Graphics LCD 5 way joystick 2 ...