Brands

SKU: AF-1269 | Brand: Adafruit

The Adafruit 1.2" 4-Digit 7-Segment Display with I2C Backpack in yellow makes it easy to add a large, bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2...

SKU: AF-1310 | Brand: Adafruit

A 50 × 50 mm glass sheet coated on one side with Indium Tin Oxide (ITO) — a transparent, electrically conductive film. The same material is used in LCD/OLED manufacturing and scientific research. Experiment with creat...

SKU: LB-TURING-GEARS | Brand: Little Bird

An expansion pack of gears and gear bits for the Turing Tumble marble-powered computer game. These additional parts let you tackle more advanced puzzles and build larger, more complex mechanical logic circuits on your...

SKU: AF-3985 | Brand: Adafruit

This T-Slot Photo Interrupter with Cable is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR...

SKU: AF-1375 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: AF-1400 | Brand: Adafruit

The Adafruit Push-button Power Switch Breakout lets you toggle DC power on and off with a simple button press. A latching analogue circuit uses a 3A P-FET to connect or disconnect the input to the output — press once ...

SKU: AF-1411 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with...

SKU: AF-1429 | Brand: Adafruit

Control 24 channels of 12-bit PWM output with the Adafruit TLC5947 breakout board. Designed for LED control, this SPI-driven board delivers constant-current open-drain outputs that keep brightness consistent even if t...

SKU: LB-LR0601 | Brand: Little Bird

This VGA expansion board adds a VGA output to your Raspberry Pi via the GPIO header, while leaving the HDMI connector free for a second display or other use. Compatible with Raspberry Pi 3B, 2B, B+, and A+. Setup req...

SKU: LI-650-0094 | Brand: Little Bird

This little screwdriver is used to modify any Bit with a micro adjuster (e.g. pulse, rgb led).

SKU: LI-650-0063 | Brand: Little Bird

SHORT DESCRIPTIONThe USB power may be the smallest in the series, but it's big enough to send juice to all your creations. Connect a USB cable (included) to your computer or phone charger to start the power flowing. T...

SKU: AF-3643 | Brand: Adafruit

A 2.1 mm DC barrel jack with a built-in rocker switch, giving you a simple on/off control for devices that lack a dedicated power switch. It shares the same PCB footprint as a standard non-switched barrel jack, so it ...

SKU: AF-3700 | Brand: Adafruit

A candy-coloured zipper case that's the perfect size for makers on the go. Instead of tossing your Raspberry Pi or Metro M0 Express into the abyss of your backpack, keep it safe and organised in this compact pouch. S...

SKU: LB-LS0100 | Brand: Little Bird

HS0100 White 1080P Mini HDMI  To VGA  Converter Box Adapter

SKU: LB-LS0239 | Brand: Little Bird

This e-textiles ambient light sensor uses the TEMT6000 phototransistor to detect light levels. Designed for wearable electronics, it features a compact 20 mm round PCB that's only 0.8 mm thick — thin enough to sew int...

SKU: LB-LS0233 | Brand: Little Bird

This is a breakout board for the WS2812B RGB LED. The WS2812B (or “NeoPixel”) is actually an RGB LED with a WS2811 built right into the LED! All the necessary pins are broken out.Several of these breakouts c...

SKU: AF-3492 | Brand: Adafruit

The Adafruit PDM MEMS Microphone Breakout provides a digital audio input using Pulse Density Modulation (PDM) — a common interface in commercial products that's distinct from both analogue and I2S microphones. It's id...

SKU: AF-3688 | Brand: Adafruit

Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with a Micro SD Card Extender . This simple, but effective device gives you a long flexible cable, a psuedo Micro SD ...

SKU: LW-TEK7 | Brand: Little Bird

Red Heart-shaped sewable LED board.  Product Details• Add light up LED Hearts to your crafts• LED light is Pink• Pack Includes 4x LED Hearts• Recommended Age 8+

SKU: AF-1493 | Brand: Adafruit

A compact aluminium heat sink designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Its small footprint and tall fin design provide effective thermal dissi...