Brands

SKU: AF-6383 | Brand: Adafruit

E-Ink and ePaper panels are excellent for low-power projects where you want a daylight-readable display that can hold its image even when power is disconnected. This bare 2.13" diagonal panel gives you a paper-like, h...

SKU: SF-BOB-21772 | Brand: SparkFun

This WM8960 breakout is a low-power stereo audio codec board for adding audio input and output to digital projects. The WM8960 works as both a stereo audio ADC and DAC, using I2S for audio data while allowing settings...

SKU: SF-SEN-15191 | Brand: SparkFun

This Qwiic RFID reader breakout makes it much easier to add low-frequency 125kHz RFID scanning to a project. It is designed for ID Innovations ID-3LA, ID-12LA and ID-20LA reader modules, converting the module output i...

SKU: SF-SEN-29260 | Brand: SparkFun

Measure high concentrations of carbon dioxide with a Qwiic breakout built around Sensirion’s STC31 sensor. It is designed for CO2 measurements up to 100% volume, using a thermal conductivity measurement principle and ...

SKU: SF-SEN-30161 | Brand: SparkFun

Built around the VCNL4040, this tiny Qwiic Micro breakout provides short-range presence detection for projects where space and weight are tight. It is designed for qualitative sensing: detecting whether an object is p...

SKU: SF-SEN-30282 | Brand: SparkFun

Build a connected weighing system without starting from low-level load cell code. OpenScale IoT is a wireless scale controller built around the ESP32-PICO-MINI, designed to turn a standard load cell setup into a confi...

SKU: SF-WRL-18712 | Brand: SparkFun

Built for field deployments well beyond WiFi and mobile coverage, this compact tracker combines an Iridium 9603N Short Burst Data modem with the Arduino-compatible Artemis module. It can send and receive short satelli...

SKU: SF-GPS-28871 | Brand: SparkFun

This GNSS RTK breakout brings the u-blox X20 engine to a maker-friendly board for high-precision positioning projects. It is designed around the ZED-X20P all-band receiver and can process signals from GPS, Galileo, Be...

SKU: SF-KIT-15209 | Brand: SparkFun

This kit gives you the core hardware needed to start reading 125kHz RFID tags over I2C, without hunting for a separate reader module, antenna or wiring up a complex circuit. The box includes a SparkFun RFID Qwiic Read...

SKU: SF-PRT-26784 | Brand: SparkFun

This compact Qwiic board lets you switch power to downstream Qwiic devices so high-current modules can be turned off when they are not needed. That can help conserve energy in battery-powered builds using GNSS and oth...

SKU: SF-LCD-29530 | Brand: SparkFun

This compact OLED board gives your project a crisp monochrome white-on-black interface in a 1.5-inch square form factor. With 128x128 pixels and a 1:1 aspect ratio, it suits custom graphics, menus, status screens and ...

SKU: SF-COM-30416 | Brand: SparkFun

Control higher-power loads from a microcontroller over I2C with this Qwiic relay board. It is built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw relay, letting a low-voltage logic system switch loads up to 1A at...

SKU: SF-SEN-27544 | Brand: SparkFun

When the ADC built into your microcontroller is not precise enough, this Qwiic breakout adds a high-resolution Texas Instruments ADS1219 for measuring very small analogue voltage changes.The board provides four channe...

SKU: SF-SEN-29529 | Brand: SparkFun

This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for ...

SKU: DF-SER0071 | Brand: DFRobot

This heavy-duty PWM servo is built for high-load motion control where torque, durability and repeatable positioning matter. It uses a 24V brushless motor with a 12-bit magnetic encoder to deliver up to 450kg·cm stall ...

SKU: DF-SER0073 | Brand: DFRobot

Built for demanding robotics and automation, this industrial servo combines a high-voltage brushless motor, hardened steel gearing and non-contact magnetic encoder feedback for strong, repeatable motion control.At 24V...

SKU: DF-SER0072 | Brand: DFRobot

This industrial-grade motion actuator is built for high-load applications that need serious torque, accurate position control and rugged construction. It combines a 24V brushless motor with a 12-bit magnetic encoder f...

SKU: DF-SEN0658 | Brand: DFRobot

Bring multiple environmental measurements into one rugged field sensor for Arduino, IoT and monitoring projects. This 9-in-1 unit measures ultrasonic wind speed and direction, air temperature, relative humidity, atmos...

SKU: SF-DEV-17852 | Brand: SparkFun

Add portable power and sound to your BBC micro:bit projects with this lightweight add-on PCB. It fits snugly against the micro:bit and includes a built-in buzzer plus a 3V coin cell holder, making it well suited to we...

SKU: AF-5807 | Brand: Adafruit

This breakout is built around the HUSB238 USB PD sink chip, making it easy to negotiate power from a USB Type-C Power Delivery source without soldering tiny resistors. It plugs into a USB-C cable and uses the CC lines...