Brands

SKU: AF-5216 | Brand: Adafruit

If you have a USB Type C port on your computer over here and you want to connect something over there then this extension cable will do the job right quick!This cable is 2 meters long, with all the pins connecting fro...

SKU: AF-4481 | Brand: Adafruit

The Adafruit ItsyBitsy nRF52840 Express brings Bluetooth Low Energy connectivity to the tiny ItsyBitsy form factor. Powered by the Nordic nRF52840 Cortex M4 at 64 MHz with 1 MB Flash, 256 KB RAM, and 2 MB QSPI Flash, ...

SKU: AF-4253 | Brand: Adafruit

The Adafruit Quad 2×2 FeatherWing Kit lets you connect one Feather board to three FeatherWings simultaneously in a compact 2×2 grid layout — no stacking headers needed. All four sets of Feather pins are cross-connecte...

SKU: AF-3816 | Brand: Adafruit

This bolt-on hardware kit provides M3 standoffs and screws for securely mounting a Circuit Playground Express, Circuit Playground Classic, micro:bit, Gemma M0, Flora, or other small circular/compact boards to your pro...

SKU: SF-WRL-18569 | Brand: SparkFun

This RP-SMA to U.FL Cable is commonly used to attach WiFi, Bluetooth, or nRFxxx based devices to a 2.4GHz antenna. What makes this unassuming cable special is the slightly longer length of 150mm (compared to 100mm). W...

SKU: SF-PRT-18582 | Brand: SparkFun

This IR proximity contactless button makes for a good replacement for typical push buttons in situations where touching the button isn't required or desirable (especially in this day and age). This button includes a b...

SKU: DF-SEN0403 | Brand: DFRobot

DFRobot TCS3430 XYZ Tristimulus Color Sensor employs the new generation of TCS3430 spectral sensor IC launched by the well-known AMS company. It features advanced digital ambient light sensing(ALS) and CIE 1931 tristi...

SKU: EC-SPS40201S | Brand: Elecrow

This Elecrow 4-channel IR reflective sensor module combines four infrared emitter/receiver pairs with a mainboard that processes all signals. When an object enters the detection range, the corresponding channel output...

SKU: EC-CRF16500R | Brand: Elecrow

This product has been used in building intercom and access control products for many years, it has high stability and strongest anti-interference ability. The ATMEGA8 of this module is a high- performance AVR MCU of A...

SKU: AF-4552 | Brand: Adafruit

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter...

SKU: SF-PRT-17252 | Brand: SparkFun

The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80, right angle, PTH pins. Add this part to your board to create a handy...

SKU: SF-DEV-16811 | Brand: SparkFun

In the next iteration of the Model B line, Raspberry Pi has given us the very powerful Model B 4 with the goal of the credit card sized development platform becoming a full desktop experience. The 8GB DDR4 RAM version...

SKU: SF-DEV-17047 | Brand: SparkFun

The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...

SKU: DF-FIT0719 | Brand: DFRobot

This NEO case is designed specifically for the needs and functionality of the Raspberry Pi 4 Model B. Made with aluminum alloy and polished with a modem Space Grey finish for stunning aesthetics.The case acts as passi...

SKU: AF-4736 | Brand: Adafruit

Nothing is going to be as thin and flexible as this wire - it feels a little like waxed thread but can carry current! You could use this in wearables or very fine assemblies where weight and bulk is at a premium. Sili...

SKU: DF-FIT0689 | Brand: DFRobot

This 10 cm FPC flat-flex ribbon cable is designed for use with DFRobot GDI (General Display Interface) displays. The 18-pin reverse-contact cable is durable and resistant to damage even when bent sharply, with insulat...

SKU: EF-EF04083 | Brand: ElecFreaks

This three-cup anemometer measures wind speed by generating a DC voltage proportional to the rotation speed of its aluminium cups. The faster the wind blows, the higher the voltage output — up to 1.2V at maximum speed...

SKU: DF-FIT0652 | Brand: DFRobot

A tower-style CPU cooler for the Raspberry Pi, combining a 5mm copper heatpipe, multi-layer aluminium heat sinks, and a 7-blade fan to significantly reduce operating temperatures. Under overclocking conditions, it can...

SKU: AF-4697 | Brand: Adafruit

A black rubber cap designed to fit standard 5-way navigation joysticks, providing a comfortable grip surface with directional etching. Presses on firmly and is easy to clean with mild soap and water. Compatible with ...

SKU: SF-SEN-16295 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...