Brands and Manufacturers

SKU: AF-5588 | Brand: Adafruit

Here's a handy 6cm x 8cm Proto-board PCB that is meant for use with 2mm pitch parts - like maybe an XBee. Both sides have a green silkscreen with some row/column markings. Note that these don't ...

SKU: AF-5578 | Brand: Adafruit

The BS612 is a compact, fully configurable mini PIR motion sensor that detects movement from approximately 3–8 metres away with a 120° detection spread. Its small form factor makes it ideal for unobtrusive motion-sens...

SKU: DF-DFR0918 | Brand: DFRobot

This terminal block expansion hat for Raspberry Pi offers securely and stably fitted connections for your projects. All GPIO pins are broken out to terminal blocks. The terminal block is labeled with high-quality colo...

SKU: AF-5579 | Brand: Adafruit

The Adafruit MMC5603 is a triple-axis magnetometer (compass) breakout with a wide ±30 gauss (±3000 µT) measurement range and full 20-bit output resolution at up to 1000 Hz. It's sensitive enough to detect Earth's magn...

SKU: AF-5528 | Brand: Adafruit

This Anodised Aluminium Machined Knob in silver is a premium upgrade for any rotary encoder or potentiometer. Solid machined aluminium with knurled sides for a secure grip and a shiny anodised finish that looks right ...

SKU: AF-5487 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: SB-21239 | Brand: Little Bird

A GPIO header extension adapter for the Raspberry Pi 400, providing a standard 2×20 pin GPIO header so you can connect HATs, pHATs, and other add-on boards. Since the Pi 400's GPIO header is recessed at the back of th...

SKU: DF-SEN0521 | Brand: DFRobot

The 5.8GHz Microwave Radar Module is a high-sensitivity motion detection sensor that transmits and receives 5.8GHz electromagnetic waves. By analysing the difference between transmitted and reflected signals, it relia...

SKU: DF-SEN0502 | Brand: DFRobot

This looks like a potentiometer, but it’s an encoder switch. It is a cascadable 360 ° rotary encoder switch with 20 pulses per revolution, and each pulse corresponds to a detent. There are LED lights set for each dete...

SKU: AF-5348 | Brand: Adafruit

The Adafruit QT Py ESP32-S2 with uFL Antenna Port is the extended-range version of the QT Py ESP32-S2. Instead of an on-board antenna, it features a uFL connector so you can attach any 2.4 GHz Wi-Fi antenna for signif...

SKU: DF-FIT0814 | Brand: DFRobot

A compact, multi-function USB tester with a 1.44" TFT LCD colour display. It monitors voltage, current, power, capacity, charging protocol, and cable resistance in real time, with support for fast-charge protocol dete...

SKU: DF-FIT0798 | Brand: DFRobot

An M.2 (A+E Key) to Gigabit Ethernet adapter module designed for the LattePanda Alpha and Delta. Built around the Realtek RTL8111F controller, this module adds an RJ45 Gigabit Ethernet port via the M.2 slot, providing...

SKU: DF-TEL0142 | Brand: DFRobot

When building a project that needs to transmit some simple signals wirelessly, have you been bothered by the any of the following problems: Bluetooth's cumbersome AT command configuration and high cost, Wifi's signal ...

SKU: AF-5160 | Brand: Adafruit

Cytron's Maker Pi Pico Base incorporates the most wanted Reset button for your Raspberry Pi Pico and gives you access to all GPIO pins on two 20-pin headers, with clear labels. Each GPIO is paired with an LED indicato...

SKU: SF-SEN-18367 | Brand: SparkFun

A sealed, waterproof DS18B20 digital temperature probe for precise measurements in wet or harsh environments. The sensor communicates over a 1-Wire interface, requiring just one data pin (plus ground) to connect to yo...

SKU: WS-20330 | Brand: Waveshare

RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For softwa...

SKU: AF-4901 | Brand: Adafruit

The Adafruit GPIO Reference Card for Raspberry Pi Pico is a pocket-sized, full-colour pinout diagram printed on durable card stock. It provides a quick visual guide to every pin on the Pico, clearly labelling power, P...

SKU: DF-DFR0803 | Brand: DFRobot

A HiFi digital power amplifier board with Bluetooth 5.0 and AUX input, delivering 50W per channel in a dual-channel configuration. With AM interference suppression and filtering, the board achieves THD as low as 0.1% ...

SKU: EC-SEL71220A | Brand: Elecrow

A current sensing module based on the Allegro ACS712 Hall effect sensor, capable of accurately measuring both AC and DC current up to ±20 A. The module outputs a proportional analogue voltage that can be read directly...

SKU: AF-4831 | Brand: Adafruit

The Adafruit LTR390 is a dual-purpose UV and ambient light sensor with true UVA sensing at a peak spectral response between 300 and 350 nm. Unlike UV index approximation sensors, the LTR390 has a genuine UV photodiode...