Brands and Manufacturers

SKU: SF-PRT-12046 | Brand: SparkFun

This green Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jumper...

SKU: AF-2831 | Brand: Adafruit

This Photo Transistor Light Sensor is a simple sensor that detects ambient light. It's kind of the opposite of an LED - when light hits the little chip inside, it induces current to flow from the long pin...

SKU: SF-COM-00526 | Brand: SparkFun

The LD1117V33 is a low-dropout (LDO) positive voltage regulator with a fixed 3.3V output. With on-chip trimming providing ±1% output voltage tolerance and built-in current and thermal limiting, it's a reliable choice ...

SKU: SF-DEV-10867 | Brand: SparkFun

This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics...

SKU: SF-SEN-10293 | Brand: SparkFun

A simple piezo element that can be used as both a sensor and a small audio transducer. When flexed or tapped, it generates a voltage that can be read by a microcontroller, making it ideal for knock and vibration detec...

SKU: AF-3501 | Brand: Adafruit

The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+...

SKU: AF-5776 | Brand: Adafruit

The Adafruit Sensirion SHT41 is a high-accuracy temperature and humidity sensor with a true I2C interface, part of Sensirion's fourth-generation SHT4x family. Compared to the SHT40, the SHT41 offers significantly bett...

SKU: WS-20380 | Brand: Waveshare

The PicoGo is a smart mobile robot platform designed for the Raspberry Pi Pico. It integrates line-following, obstacle avoidance, ultrasonic ranging, object tracking, Bluetooth and IR remote control, an LCD display, a...

SKU: LB-AAA-BATTERY | Brand: Little Bird

A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your E-Textile circuit. ...

SKU: AF-5733 | Brand: Adafruit

This unbelievably small USB camera is great for embedded projects that have USB host support for standard UVC cameras, and not a lot of space. Sure you could get a desktop USB camera at any tronix shop, but would i...

SKU: AF-5724 | Brand: Adafruit

The Adafruit RP2040 CAN Bus Feather combines the powerful RP2040 microcontroller with an MCP25625 CAN controller and transceiver, giving you a ready-to-go CAN Bus interface in the compact Feather form factor. No solde...

SKU: MD-A0160 | Brand: Makedo

Top-up your Makedo with this combo of SCRU and SCRU+. With a mix of more reusable SCRUs in your Makedo kit you can make more things, make with more complexity and collaborate with more makers. NOTE: This is not ...

SKU: LB-IBIS | Brand: Little Bird

Micro:bit Power Supply Module 3.3V 2A is a kind of power module for micro:bit. The output voltage of 3.3v can be connected directly to the battery connector of the micro:bit, providing strong and steady power suppl...

SKU: AF-5452 | Brand: Adafruit

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with different power and current capabilities, this cable will convert any...

SKU: LB-LORI-RT | Brand: Little Bird

Description The Little Bird Lorikeet is an RGB LED strip 5 programmable LEDs. This Australian made board uses the WS2812B LED (better known as NeoPixels). This Raspberry Pi HAT has a chain-able design means you ca...

SKU: AF-5400 | Brand: Adafruit

The Adafruit ESP32 Feather V2 is a major redesign of the original HUZZAH32 ESP32 Feather, featuring 8 MB flash, 2 MB PSRAM, USB-C, a STEMMA QT port, a NeoPixel, and a user button. The dual-core ESP32 at 240 MHz provid...

SKU: EF-EF08232 | Brand: ElecFreaks

Based on Planet X sensors, Nezha Inventor's Kit is designed for BBC micro:bit. It contains multiple sensors, ultrasonic sensor, crash sensor, line-tracking sensor, etc., and also with over 400 pieces of bricks. We pla...

SKU: AF-4862 | Brand: Adafruit

The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input ...

SKU: DF-FIT0737 | Brand: DFRobot

This USB to RS485 converter module( USB 1.1，USB 2.0，USB 3.0 compatible) can expand one RS485 asynchronous communication interface from a computer’s USB interface to realize the communication between PC and other RS485...

SKU: LB-USB-C | Brand: Little Bird

A 1-metre USB-A to USB-C cable wrapped in a soft, patterned fabric braid with an eye-catching design. Supports USB 1.1 and 2.0 for data transfer and charging — works with any device that has a USB-C port. Key Feature...