Brands and Manufacturers

SKU: EF-EF03413 | Brand: ElecFreaks

Robit is a motherboard of smart car based on micro:bit. It is compatible with MBOT. Except for the integration of the simple and convinient RJ25 connector，motor connector and sensor on MBOT, we have extended 4 DC m...

SKU: EF-EF08179 | Brand: ElecFreaks

The ElecFreaks Micro:bit Starter Kit is a comprehensive electronics learning kit designed for beginners exploring circuits and programming with the BBC micro:bit. It includes a micro:bit board along with a breadboard ...

SKU: SF-SEN-15103 | Brand: SparkFun

The Sensirion SPS30 is a compact, high-quality optical particle sensor that uses laser scattering and Sensirion's innovative contamination-resistance technology for superior binning and particle measurement. It measur...

SKU: AF-1450 | Brand: Adafruit

A metal-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables ...

SKU: AF-3957 | Brand: Adafruit

The Adafruit CRICKIT HAT is a robotics and electronics driver board that plugs directly onto any Raspberry Pi with a 2×20 GPIO header. It adds motor drivers, servo outputs, capacitive touch inputs, a level-shifted Neo...

SKU: LW-TEK6 | Brand: Little Bird

Teknikio Blue star-shaped sewable LED board.  Product Details• Add light up LED Stars to your crafts• LED light is blue• Pack Includes 4x LED Stars• Recommended Age 8+

SKU: TB-AA0274 | Brand: Little Bird

With this basic but essential tool it is possible to check the function, brightness, colour and polarity of most kinds of light emitting diodes (LED). The LED to be tested plugs into the front panel, at the current ...

SKU: AF-1682 | Brand: Adafruit

This 50-pin FPC (Flexible Printed Circuit) cable is ultra-thin and flexible, ideal for tight spaces where a round cable would be too bulky. At 250mm (10″) long with 0.5mm pitch contacts, it's a common format used in d...

SKU: AF-1759 | Brand: Adafruit

Mod your stuffed toy to chirp, meow, or woof! This GEMMA parts pack makes it easy to add simple sounds to any plush toy, and especially the Sew-Your-Own Owl Kit (not included!) A tilt ball switch is used to trigger...

SKU: PL-2851 | Brand: Pololu

The Pololu D24V50F5 is a high-efficiency step-down (buck) voltage regulator that converts input voltages up to 38V down to a fixed 5V output. With a typical maximum output current of 5A and efficiency between 85% and ...

SKU: AF-2190 | Brand: Adafruit

The VERTER is a buck-boost DC-DC converter that accepts 3–12 V input and outputs a stable 5.2 V — ideal for powering Arduino, Raspberry Pi, and other 5 V electronics from a wide variety of battery packs. The slightly ...

SKU: AF-2218 | Brand: Adafruit

The TFP401 breakout is a compact HDMI/DVI decoder that outputs raw 24-bit colour pixel data to 40-pin TTL displays. It decodes unencrypted video at any resolution from 25–165 MHz pixel clock (up to 1080p) and includes...

SKU: AF-2243 | Brand: Adafruit

A short-profile 2×20 female through-hole header for connecting Raspberry Pi HATs with minimal height above the board. This custom header provides a slimmer fit than standard-height GPIO headers, ideal for compact encl...

SKU: PL-2692 | Brand: Pololu

This ball caster is an improved version of our original Pololu Ball Caster with 1″ Plastic Ball; we recommend this new version over the older version for all applications that are not somehow specifically tied to the ...

SKU: AF-2349 | Brand: Adafruit

This Reflective IR Sensor is a simple plastic casing with two elements - an IR LED and an IR phototransistor. You can control the IR LED and turn it on to bounce IR off objects to determine their reflectivity. White &...

SKU: AF-154 | Brand: Adafruit

This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different h...

SKU: AF-2298 | Brand: Adafruit

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and ...

SKU: SF-KIT-13927 | Brand: SparkFun

The LilyPad Sewable Electronics Kit is an introduction to the world of e-textiles and electronic sewing. Through a series of guided projects, you'll learn to sew basic circuits, light up LEDs, control them with button...

SKU: AF-9 | Brand: Adafruit

Yow! These things are super powerful. 1/2" diameter, 3/16" thick discs, south side is marked with a red line. Great for use with your SpokePOV Kit. If you have an aluminium frame, use tape/foamstickytape to attach it.

SKU: AF-3096 | Brand: Adafruit

King Arthur carried Excalibur and Thor wields Mjölnir, but the Electrical Engineer? She will always have a pair of excellent tweezers at the ready such as these Rhino SW-11 Tweezers! They are sharp, straight, and supe...