Brands and Manufacturers

SKU: DF-SEN0019 | Brand: DFRobot

This is an Arduino infrared distance sensor. It has an adjustable detection range, 3cm - 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line,...

SKU: AF-2042 | Brand: Adafruit

The 16×8 1.2" LED Matrix + Backpack combines two ultra-bright square pure green 8×8 LED matrices on a single, compact driver board. The square pixel design creates a seamless, uniform look — perfect for scrolling text...

SKU: AF-2043 | Brand: Adafruit

The 16×8 1.2" LED Matrix + Backpack combines two ultra-bright square yellow 8×8 LED matrices on a single, compact driver board. The square pixel design creates a seamless, uniform look — perfect for scrolling text, sm...

SKU: AF-2044 | Brand: Adafruit

The 16×8 1.2" LED Matrix + Backpack combines two ultra-bright square white 8×8 LED matrices on a single, compact driver board. The square pixel design creates a seamless, uniform look — perfect for scrolling text, sma...

SKU: PL-1756 | Brand: Pololu

These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1″ (2.54 mm) headers, connectors, and solderless breadboards. ...

SKU: SF-PRT-09576 | Brand: SparkFun

This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220, TO-218, TO-247, and Multiwatt packages - which means it’s a great fit for the STA540, L298N, and all of our T-220 package...

SKU: DF-DFR0027 | Brand: DFRobot

What's the simplest way to check vibration with Arduino? Use a vibration sensor from DFRobot. You can directly plug it on our IO Expesion Shield V7. Just vibrate this sensor, Arduino can receive a digital signal. It'...

SKU: AF-850 | Brand: Adafruit

When we're on the go, we like to keep a multimeter in our purse and this model is by far the best pocket meter we've found. It's so good you'll end up using it as your main multimeter! First up, this meter can measur...

SKU: DF-DFR0463 | Brand: DFRobot

Good news! There is a new member in to the Gravity family - The Flexible16x16 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Ar...

SKU: AF-2010 | Brand: Adafruit

Note: The Pro Trinket's bit-bang USB technique is a legacy approach that may not work reliably with modern operating systems. For new projects, consider an ItsyBitsy or Metro Mini board with native USB support at a c...

SKU: SF-WIG-09555 | Brand: SparkFun

This board allows you to interface with your car’s OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a fo...

SKU: AF-860 | Brand: Adafruit

You will squeak with delight when you hold this adorable miniature LED matrix. 0.8" square, it's got everything a big LED matrix has, but bite sized! 64 bright yellow LEDs are contained inside the plastic body, in ...

SKU: DF-SEN0231 | Brand: DFRobot

The Formaldehyde (HCHO) sensor is an Arduino & Raspberry Pi compatible module, which is the ideal solution for indoor air quality monitor. This is a HCHO(CH2O) sensor module. It can be used to measure HCHO in a...

SKU: AF-861 | Brand: Adafruit

You will squeak with delight when you hold this adorable miniature LED matrix. 0.8" square, its got everything a big LED matrix has, but bite sized! 64 bright yellow-green LEDs are contained inside the plastic body...

SKU: AF-871 | Brand: Adafruit

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright yellow dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA and SC...

SKU: SF-COM-09481 | Brand: SparkFun

This compact 4-digit 7-segment display in blue features 10 mm digit height with a common-anode configuration. Each digit has its own decimal point, and the display includes individually controllable apostrophe and col...

SKU: AF-872 | Brand: Adafruit

The Adafruit Mini 0.7" 8×8 LED Matrix with I2C Backpack makes it easy to add a bright yellow-green dot-matrix display to any project. The I2C backpack handles all the multiplexing, so you only need two data pins (SDA ...

SKU: AF-873 | Brand: Adafruit

Here's a sticker for the MENTA, a portable minty Arduino-compatible project that fits into a common mint tin. The sticker is sized perfectly for our Altoids-size tin (tin not included). All MENTA orders (place...

SKU: AF-2082 | Brand: Adafruit

The Timber Pibow is a layered wood enclosure from Pimoroni for the Raspberry Pi 1 Model B+. Crafted from high-quality wood with transparent acrylic top and base layers, it provides a natural, elegant look while protec...

SKU: AF-879 | Brand: Adafruit

The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in yellow makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so ...