Brands and Manufacturers

SKU: SF-WRL-10532 | Brand: SparkFun

The RF Link Receiver is a simple 434 MHz wireless receiver module designed for one-way data communication with a compatible 434 MHz transmitter. It fits easily into a breadboard and pairs with microcontrollers to crea...

SKU: SF-BOB-10496 | Brand: SparkFun

This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units. This board breaks out all of the necessary pins to a row of standard 0.1" spaced header to allow for easy b...

SKU: AF-3354 | Brand: Adafruit

The Rainbow HAT from Pimoroni has a buffet of sensors, inputs, and displays to explore Android Things™. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things.Pimoroni collab...

SKU: SF-WRL-12861 | Brand: SparkFun

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough...

SKU: SF-WRL-12847 | Brand: SparkFun

XBee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino...

SKU: AF-3227 | Brand: Adafruit

Welcome to the Internet of Things with Google! Whether you are a device creator prototyping a new design for production, or a hobbyist looking for an introduction to the new Android Things API, you've come to th...

SKU: SF-PRT-10462 | Brand: SparkFun

Nylon standoffs for mounting PCBs in enclosures or elevating boards off work surfaces. These ¾" (19mm) long standoffs are tapped for 4-40 screws and sold in a pack of 10. Key Features Nylon Construction – Non-condu...

SKU: SF-PRT-10463 | Brand: SparkFun

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10

SKU: SF-SEN-12829 | Brand: SparkFun

If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those measurements, the ISL29125 breakout board may be just what you need. The ISL29125 br...

SKU: PL-3101 | Brand: Pololu

The Pololu A-Star 32U4 Micro is a general-purpose programmable module based on the ATmega32U4 AVR microcontroller from Microchip. It packs 32 KB of flash, 2.5 KB of RAM, and built-in USB into a tiny 1″ × 0.6″ DIP pack...

SKU: AF-590 | Brand: Adafruit

A value pack of three Adafruit Perma-Proto Full-Sized Breadboard PCBs. Each board mirrors the layout of a standard full-size solderless breadboard with 60 rows of 5-hole connected pads, four power bus rails, and clear...

SKU: SF-WRL-12823 | Brand: SparkFun

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile r...

SKU: SF-DEV-10406 | Brand: SparkFun

This board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layout to be used as a shield for an Arduino. There is a small prototyping area as wel...

SKU: AF-1885 | Brand: Adafruit

When I was studying power supply electronics in school, the instructor always talked about adding BFC's to the circuit - Big Freakin' Capacitors. This here is UHFC - Unbelievably Huge Freaking Capacitor. If you have a...

SKU: AF-3371 | Brand: Adafruit

A limited edition enamel pin featuring AdaBot — the friendly, curious robot mascot from Adafruit. This minimalist black and white pin with a recessed lightning bolt detail looks great on backpacks, jacket lapels, lany...

SKU: AF-3356 | Brand: Adafruit

The Adafruit Animated Eyes Bonnet (also known as the Snake Eyes Bonnet) is a Raspberry Pi accessory for driving two 128×128 pixel OLED or TFT LCD displays along with four analog sensor inputs. It's designed for creati...

SKU: SF-PRT-10401 | Brand: SparkFun

A simple single-cell LiPo/Li-Ion battery charger based on the MCP73831T charge controller IC. Connect a battery via the JST connector, plug in a Mini-USB cable for power, and the board handles charging automatically w...

SKU: SF-SEN-12784 | Brand: SparkFun

This is the SparkFun “Time-of-Flight” Range Finder, a breakout for the VL6180 distance sensor. Unlike most distance sensors that rely reflected light intensity or reflected angles to determine range, the VL6180 use...

SKU: SF-PRT-12791 | Brand: SparkFun

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each oth...

SKU: SF-SEN-12785 | Brand: SparkFun

This is the SparkFun “Time-of-Flight” Range Finder, a sensor board for the VL6180 distance sensor. Unlike most distance sensors that rely on reflected light intensity or reflected angles to determine range, the VL6180...