Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
APA102 5050 Cool White LED w/ Integrated Driver Chip - 10 Pack [~6000K]
SKU: AF-2351 | Brand: Adafruit
These APA102 (DotStar) cool white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three cool white (~6000K) dies. The phosphor coating p...
Delivered by Fri 18 Sep
Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121
SKU: AF-2024 | Brand: Adafruit
The Adafruit Capacitive Touch Shield brings 12 channels of capacitive touch sensing to any Arduino using the MPR121 chip. Each sensor has a "figure 8" pad with holes designed for quick alligator clip connections — att...
Delivered by Fri 18 Sep
Adafruit DPI TFT Kippah for Raspberry Pi
SKU: AF-2454 | Brand: Adafruit
The Adafruit DPI TFT Kippah connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. The result is a fast, native 18-bit colour display with full g...
Delivered by Thu 27 Aug
Adafruit DPI TFT Kippah for Raspberry Pi with Touch Support
SKU: AF-2453 | Brand: Adafruit
The Adafruit DPI TFT Kippah with Touch Support connects a 40-pin TTL TFT display directly to your Raspberry Pi's GPIO header, bypassing the need for an HDMI encoder/decoder. This version adds resistive touchscreen cap...
Delivered by Fri 18 Sep
Adafruit DotStar LED Strip - APA102 Cool White - 30 LED/m [~6000K]
SKU: AF-2432 | Brand: Adafruit
The Adafruit DotStar APA102 Cool White LED Strip (30 LED/m, ~6000K) uses the same integrated DotStar driver as the RGB strips but with dedicated cool white phosphor LEDs. The result is an incredibly bright, consistent...
Delivered by Fri 18 Sep
Adafruit DotStar LED Strip - APA102 Cool White - 144 LED/m [~6000K - One Meter]
SKU: AF-2434 | Brand: Adafruit
The Adafruit DotStar APA102 Cool White LED Strip (144 LED/m, ~6000K) uses the same integrated DotStar driver as the RGB strips but with dedicated cool white phosphor LEDs. The result is an incredibly bright, consisten...
Delivered by Fri 18 Sep
Analog RGBW LED Strip - RGB plus Warm White - 60 LED/m [~3000K] - 4m Reel
SKU: AF-2439 | Brand: Adafruit
An analog LED strip featuring both RGB and warm white (~3000K) LEDs at 60 LEDs per metre on a weatherproof white flexi PCB. Control the entire strip at once using any microcontroller and four transistors (one per chan...
Delivered by Thu 27 Aug
Adafruit DotStar LED Strip - APA102 Cool White - 60 LED/m [~6000K] 1m
SKU: AF-2433 | Brand: Adafruit
The Adafruit DotStar APA102 Cool White LED Strip (60 LED/m, ~6000K) uses the same integrated DotStar driver as the RGB strips but with dedicated cool white phosphor LEDs. The result is an incredibly bright, consistent...
Delivered by Thu 27 Aug
Adafruit DotStar LED Strip - APA102 Warm White - 30 LED/m [~3000K]
SKU: AF-2435 | Brand: Adafruit
The Adafruit DotStar APA102 Warm White LED Strip (30 LED/m, ~3000K) uses the same integrated DotStar driver as the RGB strips but with dedicated warm white phosphor LEDs. The result is an incredibly bright, consistent...
Delivered by Thu 27 Aug
Mini-DIN Connector Cable for iRobot Create 2 - 7 Pins - 6 feet
SKU: AF-2438 | Brand: Adafruit
With this handy 7 Pin Mini-DIN Connector you can now jack into the hackport on your iRobot and control it with an Arduino or some other favorite microcontroller that has a 5V TTL UART! You can also power your proje...
Delivered by Fri 18 Sep
URM Ultrasonic Mounting Bracket
SKU: DF-FIT0006 | Brand: DFRobot
This is a mounting bracket designed for our URM ultrasonic sensor series.It is fully compatible with URM37 and URM04. You can also have this item with only 300 reward points. SPECIFICATIONS Mounting Pitch: 14mm(0....
Delivered by Thu 27 Aug
IIC TO GPIO shield V2.0
SKU: DF-DFR0013 | Brand: DFRobot
The DFRobot IIC to GPIO Shield V2.0 (DFR0013) expands your Arduino's digital I/O capacity by converting a single I2C bus into 16 additional digital I/O ports. Using just two data lines (SCL and SDA), the shield frees ...
Delivered by Thu 27 Aug
SRF05 ultrasonic sensor
SKU: DF-SEN0006 | Brand: DFRobot
The latest model SRF05 Detection range of 3 cm from the original SRF04 -3 m, increased to 1 cm -4 meters. RF04 is compatible with the original. Also has smaller side lobes. Ultrasonic module can be used to identi...
Delivered by Mon 7 Sep
Toggle Clamp - Large Size [201B]
SKU: AF-2457 | Brand: Adafruit
*Ka-thunk* Pin down that PCB with our Toggle Clamp, a sturdy and reliable way to quickly press and release with precision! A pogo-pin bed is a great way to connect and test boards without any soldering, but you have t...
Delivered by Fri 18 Sep
Adafruit Bluefruit LE UART Friend - Bluetooth Low Energy (BLE)
SKU: AF-2479 | Brand: Adafruit
The Adafruit Bluefruit LE UART Friend adds Bluetooth Low Energy connectivity to any microcontroller or computer with a hardware or software serial port. With hardware flow control built in, you won't lose data during ...
Delivered by Thu 27 Aug
SRF02 ultrasonic sensor
SKU: DF-SEN0005 | Brand: DFRobot
This low cost SFR02 ultrasonic ranger has both I2C and Serial interfaces. New AutoTune algorithms intelligently back the minimum range right up to the transducer ringdown for the very best performance possible, aut...
Delivered by Mon 7 Sep
Toggle Clamp - Medium Flip-up Style
SKU: AF-2456 | Brand: Adafruit
This medium flip-up toggle clamp provides a quick, reliable way to press and hold PCBs firmly in place during testing, soldering, or pogo-pin bed operations. The rounded rubber tip grips securely without marring or da...
Delivered by Fri 18 Sep
Arduino Mega 2560 Rev3
SKU: DF-DFR0108 | Brand: DFRobot
The Arduino Mega 2560 Rev3 is a microcontroller board based on the ATmega2560, offering significantly more I/O than standard Arduino boards. With 54 digital I/O pins, 16 analog inputs, and 4 hardware serial ports, it'...
Delivered by Mon 7 Sep
3-wire Serial LCD Module (Arduino Compatible)
SKU: DF-DFR0091 | Brand: DFRobot
A 128 × 64 pixel graphic LCD module based on the ST7920 controller, featuring a blue backlight with white characters. Supports both parallel (8/4-bit) and SPI (3-wire serial) interfaces, with parallel mode set as the ...
Delivered by Mon 7 Sep
SRF10 - The Worlds Smallest Dual Transducer Ultrasonic Ranger
SKU: DF-SEN0008 | Brand: DFRobot
This small sonar ranger from Devantech offers an amazing wide range from 3cm to 6m. The SRF10 is interfaced using the IIC bus. SPECIFICATIONS Voltage-5v Current-15mA Typ. 3mA Standby Frequenc...
Delivered by Mon 7 Sep
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
