Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
JST SH Jumper 6 Wire Assembly - 8
SKU: SF-PRT-10361 | Brand: SparkFun
This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on t...
Delivered by Mon 7 Sep
Pan/Tilt Bracket
SKU: SF-ROB-10335 | Brand: SparkFun
This pan/tilt bracket kit includes two brackets and all the hardware needed to build a pan/tilt mechanism using two servo motors. Perfect for mounting cameras, sensors, or other small payloads that need two-axis posit...
Delivered by Thu 27 Aug
Voltage Regulator - 12V
SKU: SF-COM-12766 | Brand: SparkFun
The L7812 is a three-terminal positive voltage regulator with a fixed 12V output. It provides stable local regulation with built-in protection against overcurrent, thermal overload, and short circuits, making it a rel...
Delivered by Thu 27 Aug
LattePanda Windows 10 Mini PC (2G/32GB) - A Powerful Windows 10 Mini PC
SKU: DF-DFR0418 | Brand: DFRobot
You are viewing a 2GB RAM LattePanda Windows 10 mini PC with 32GB eMMC memory. It does include a Windows 10 OEM activation key, which will activate on the initial boot. A LattePanda is a complete Windows 10 s...
Delivered by Thu 27 Aug
LiPower - Boost Converter
SKU: SF-PRT-10255 | Brand: SparkFun
The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery, has solder jumper selectable 5V and 3.3V output, and an under voltage protection...
Delivered by Thu 27 Aug
SparkFun USB LiPoly Charger - Single Cell
SKU: SF-PRT-12711 | Brand: SparkFun
The SparkFun USB LiPoly Charger is a single-cell Li-Ion/Li-Polymer battery charging board based on the MCP73831T. It charges 3.7V LiPo cells at a selectable rate of 500 mA or 100 mA via a solder jumper, with power inp...
Delivered by Thu 27 Aug
Right-angle Mini GSM/Cellular Quad-Band Antenna - 2dBi SMA Plug
SKU: AF-1858 | Brand: Adafruit
This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Anten...
Delivered by Thu 27 Aug
Adafruit SPI Non-Volatile FRAM Breakout - 64Kbit / 8KByte
SKU: AF-1897 | Brand: Adafruit
The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no pa...
Delivered by Thu 27 Aug
SparkFun LiPo Charger Basic - Micro-USB
SKU: SF-PRT-10217 | Brand: SparkFun
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells ...
Delivered by Thu 27 Aug
Micro Metal Gear Motor with Connector (30:1)
SKU: DF-FIT0467 | Brand: DFRobot
INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting h...
Delivered by Mon 7 Sep
PowerBoost 500 Basic - 5V USB Boost @ 500mA from 1.8V+
SKU: AF-1903 | Brand: Adafruit
The PowerBoost 500 Basic is a compact DC/DC boost converter that takes input from 1.8V or higher and outputs a steady 5.2V — perfect for powering portable 5V projects from batteries. The slightly elevated 5.2V output ...
Delivered by Fri 18 Sep
SparkFun Solder-able Breadboard - Large
SKU: SF-PRT-12699 | Brand: SparkFun
This is the Large SparkFun Solder-able Breadboard. A bare PCB that is the exact size as our full-size breadboard with the same connections to pins and power rails. This board is especially useful for preserving a prot...
Delivered by Mon 7 Sep
PaPiRus 2.7 eInk Display HAT for Raspberry Pi from Pi Supply
SKU: AF-3420 | Brand: Adafruit
The PaPiRus Screen HAT from Pi Supply is an ePaper / eInk screen HAT designed for the Raspberry Pi. Think of it as the older sibling of the PaPiRus Zero.ePaper / eInk is a display technology that mimics the appearance...
Delivered by Thu 27 Aug
Gravity: 130 DC Motor Module
SKU: DF-DFR0411 | Brand: DFRobot
INTRODUCTION This DC motor has an integrated transistor built in to the board, eliminating the need for a motor driver. Use PWM to control it for all your DIY project needs. It uses the 3 pi...
Delivered by Mon 7 Sep
Reset / Enable Controller - KA75330 3.3V Voltage Detector
SKU: AF-3428 | Brand: Adafruit
A voltage detector is handy for projects where you want to make sure your microcontroller doesn't run at a low voltage. For example, say you have a Feather Huzzah running on a lipoly battery every few minutes. Even...
Delivered by Fri 18 Sep
Panel Mount USB to 4-pin Female Header Cable - 6'
SKU: SF-CAB-10177 | Brand: SparkFun
You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to the external case, or the rear expansion slots. They have a 0.1" spaced 4-pin header on one en...
Delivered by Mon 7 Sep
Universal Qi Wireless Receiver Module
SKU: AF-1901 | Brand: Adafruit
A Qi-compatible wireless charging receiver module that outputs regulated 5 V at up to 500 mA. Place this module on any standard Qi charging base to receive power wirelessly — ideal for adding wireless recharging capab...
Delivered by Fri 18 Sep
SparkFun Sound Detector
SKU: SF-SEN-12642 | Brand: SparkFun
The SparkFun Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of so...
Delivered by Mon 7 Sep
RFID Tag - ABS Token MIFARE Classic® 1K (13.56 MHz)
SKU: SF-SEN-10127 | Brand: SparkFun
This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and w...
Delivered by Mon 7 Sep
Mini 3-wire Volt Meter (0 - 99.9VDC)
SKU: AF-705 | Brand: Adafruit
A compact 3-wire voltage meter with a vivid green 3-digit 7-segment display. Reads 0–99.9VDC with 0.1V precision, making it perfect for monitoring battery levels, power supplies, and electronic projects. Mounting tabs...
Delivered by Thu 27 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
