Brands and Manufacturers

SKU: SF-DEV-20359 | Brand: SparkFun

The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, an...

SKU: AF-5450 | Brand: Adafruit

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with different power and current capabilities, this cable will convert any...

SKU: AF-5302 | Brand: Adafruit

The Adafruit KB2040 is an RP2040-powered board designed specifically for mechanical keyboard builds, in the Arduino Pro Micro form factor. With castellated pads, USB-C, 8 MB of Flash, and a STEMMA QT / Qwiic connector...

SKU: EF-EF11098 | Brand: ElecFreaks

This compact DC micro submersible pump from ElecFreaks operates at 3V, making it easy to integrate into microcontroller-based projects. It comes equipped with male and female Dupont connectors for quick and simple wir...

SKU: EF-11098 | Brand: ElecFreaks

This compact DC micro submersible pump from ElecFreaks operates at 3V, making it easy to integrate into microcontroller-based projects. It comes equipped with male and female Dupont connectors for quick and simple wir...

SKU: RP-SC0038 | Brand: Raspberry Pi Ltd

The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W. These official cases consist of several parts and protect the Raspberry Pi Zero from things like rogue wires that might short ...

SKU: SF-PRT-12045 | Brand: SparkFun

This blue Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jumper ...

SKU: AF-291 | Brand: Adafruit

 The classic 'third hand tool,' as seen on every desk! We have one next to our Panavise jr, they complement each other well. This tool is good for holding small PCBs and wires for tinning or soldering to parts...

SKU: AF-3221 | Brand: Adafruit

This or that, one or the other, perhaps or perhaps not! So hard to make decisions these days without feeling like you're just going back and forth constantly. Deciding whether or not to use this mini toggle swit...

SKU: LB-00238 | Brand: Little Bird

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of abou...

SKU: PH-103393 | Brand: PiHut

A Raspberry Pi motor controller HAT built around the L293D dual H-bridge driver IC, designed to make building a Raspberry Pi robot easy and fun. Control up to 4 DC motors or 2 stepper motors at up to 600 mA (1 A peak)...

SKU: PI-PIM725 | Brand: Pimoroni

The Pimoroni Presto is an RP2350-powered desktop companion featuring a 4" square touchscreen IPS display, elegant black aluminium stand, and RGB backlighting. Fully programmable with MicroPython or C/C++, it's designe...

SKU: KI-56116 | Brand: Kitronik

Develop your coding skills with the Kitronik ARCADE for BBC micro:bit and MakeCode Arcade, a fully featured programmable gamepad for use with the MakeCode Arcade block editor. The Kitronik ARCADE for BBC micro:bit and...

SKU: LB-LS6119 | Brand: Little Bird

Introducing the Vertical Wind Generator Wind Turbine-Kit, the perfect DIY project for all ages. This complete set comes with all the materials needed to assemble your very own mini wind turbine. Not only will you have...

SKU: DF-DFR0924 | Brand: DFRobot

A terminal block expansion board for the Raspberry Pi Pico, designed for makers who prefer screw-terminal connections over soldering or breadboard wiring. Every Pico pin is broken out to a labelled terminal block, pro...

SKU: PJ-TEENSY4 | Brand: Little Bird

The Teensy 4.0 is a high-performance microcontroller development board powered by the NXP iMXRT1062 ARM Cortex-M7 processor running at 600 MHz. Despite its compact 35.6 × 17.8 mm (1.4 × 0.7") form factor — the same si...

SKU: AF-4090 | Brand: Adafruit

The Adafruit USB C Breakout Board (Downstream Connection) gives you easy access to all the pins on a USB Type-C connector, configured for downstream device use. Two 5.1K resistors on the CC1 pins signal the upstream h...

SKU: SF-CAB-10646 | Brand: SparkFun

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 15ft. len...

SKU: AF-4236 | Brand: Adafruit

A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. ...

SKU: WS-19358 | Brand: Waveshare

A 10-DOF IMU sensor expansion board designed for the Raspberry Pi Pico. Combines a 9-axis ICM20948 motion sensor (gyroscope, accelerometer, magnetometer) with an LPS22HB barometric pressure sensor, all communicating o...