Brands and Manufacturers

SKU: DF-ROB0036 | Brand: DFRobot

A fully assembled 6 degrees-of-freedom desktop robotic arm powered by six high-torque 25 kg·cm digital servo motors. The V2 version arrives pre-assembled and factory-calibrated, so you can start programming and experi...

SKU: PR-PIM652 | Brand: Little Bird

Automation 2040 W Mini is a compact Pico W / RP2040 powered monitoring and automation board. It has a host of useful features for controlling other bits of electronic and industrial kit - analog channels, powered out...

SKU: AF-4448 | Brand: Adafruit

If you'd like to connect a USB-capable chip to your USB host, this cable will make the task very simple. There is no converter chip in this cable! Its basically a plain USB cable that's cut in half and with jumper ...

SKU: DF-KIT0157 | Brand: DFRobot

The Maixduino AI Development Kit combines the Kendryte K210 RISC-V dual-core AI processor with an ESP32 module for Wi-Fi and Bluetooth connectivity, all in an Arduino UNO-compatible form factor. The K210 features a bu...

SKU: PL-2458 | Brand: Pololu

The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line fo...

SKU: EC-SPM01021S | Brand: Elecrow

This water sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sens traces. The sensor board has a demension of 5.0 x 4.0cm. There is also a on-boar...

SKU: SF-BOB-16784 | Brand: SparkFun

The SparkFun Qwiic Mux Breakout uses the TCA9548A to provide 8 independent I2C channels, solving the common problem of multiple sensors sharing the same address. Simply route each device to its own channel and communi...

SKU: PL-4049 | Brand: Pololu

The ACS724 Current Sensor Carrier provides a compact breakout for Allegro's ±50A ACS724LLCTR-50AB Hall effect-based linear current sensor. It offers a low-resistance (~1.2 mΩ) current path and electrical isolation up ...

SKU: PR-PIM277 | Brand: Little Bird

Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare boa...

SKU: SF-SEN-15103 | Brand: SparkFun

The Sensirion SPS30 is a compact, high-quality optical particle sensor that uses laser scattering and Sensirion's innovative contamination-resistance technology for superior binning and particle measurement. It measur...

SKU: AF-2349 | Brand: Adafruit

This Reflective IR Sensor is a simple plastic casing with two elements - an IR LED and an IR phototransistor. You can control the IR LED and turn it on to bounce IR off objects to determine their reflectivity. White &...

SKU: AF-2561 | Brand: Adafruit

Everything you need to get started with NeoPixel LED strips in one convenient pack. Includes a 1-metre NeoPixel strip with white flex PCB, power supply, and connectors — just add a microcontroller and you're ready to ...

SKU: AF-1447 | Brand: Adafruit

Standard HD44780 LCDs are useful for creating standalone projects.  This product is similar to our Standard LCD 16x2 display but comes with the header soldered on! 16 characters wide, 2 rows White text on blu...

SKU: AF-6314 | Brand: Adafruit

The Adafruit Sparkle Motion Mini is part of our series of "Sparkle Motion" boards, which are our attempt to make the best small WLED-friendly smart LED driving board in the whole world. Our resident mermaid, firepixie...

SKU: AF-5995 | Brand: Adafruit

DescriptionWhether you need to interface with various serial protocols, this USB to Multi-Protocol Serial adapter has you covered. It supports RS232, TTL UART, RS485, and RS422, all with quick-connect screw terminals...

SKU: AF-5942 | Brand: Adafruit

The Pixelblaze V3 Standard XL is a Wi-Fi addressable LED controller powered by an ESP32 dual-core processor at 240 MHz. It includes a web-based live pattern editor that lets you write, preview, and store LED patterns ...

SKU: PI-A000073 | Brand: Pimoroni

The board everybody gets started with, with the ATmega328 (SMD). It has 14 digital IO pins (6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack...

SKU: EC-SEL7125A | Brand: Elecrow

The ACS712 Current Sensor (5A) provides a simple way to measure AC or DC current up to ±5A. Based on the Allegro ACS712 Hall effect sensor, this module outputs a proportional analogue voltage that can be read directly...

SKU: EC-AK55865RF | Brand: Elecrow

The Leaper Upgraded Learning Kit is a comprehensive Arduino starter kit that includes advanced modules such as an RFID reader, stepper motor driver, real-time clock, and a wide range of sensors and components. Built a...

SKU: EC-AAM328AT | Brand: Elecrow

This is a ATmega328 IC in DIP package, pre-loaded with the Arduino Optiboot (Atmega328 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino...