Brands and Manufacturers

SKU: LB-LR0064 | Brand: Little Bird

The KnockOffDuino® Uno is functionally the same as the Arduino Uno R3 at a fraction of the cost. It is the Arduino for beginners and 100% Uno compatible, however it uses the CH340G usb to serial chip instead of the...

SKU: DF-DFR0299 | Brand: DFRobot

Sing for the moment! The DFPlayer Mini is a small and low cost MP3 module player with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speake...

SKU: LB-24-LIGHT | Brand: Little Bird

Light-dependent resistors are electronic components whose resistance changes with light intensity. They are also called LDRs, photoresistors, or photoconductors.   It has four pins:3.3V  : While 'VCC'...

SKU: LB-LR0282 | Brand: Little Bird

This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set this up as a voltage divider with a resistor of around 10KΩ. ...

SKU: LB-FLAME-LIGHT | Brand: Little Bird

This IR flame sensor module detects flames and infrared light sources in the 760–1,100 nm wavelength range. With a detection angle of approximately 60° and a test range of up to 80 cm (depending on flame size), it pro...

SKU: SF-SEN-10988 | Brand: SparkFun

This is the same temperature sensor that is included in our SparkFun Inventor’s Kit. The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to t...

SKU: AF-1361 | Brand: Adafruit

This conductive material, also known as Velostat or Linqstat, is a handy addition to a wearable and sensor hacking toolkit. It is pressure-sensitive, so squeezing the sheet reduces its resistance, making it useful for...

SKU: KI-5325 | Brand: Kitronik

Take your first steps in Python and physical computing with the Kitronik Discovery Kit for Raspberry Pi Pico (Pico Included). The Kitronik Discovery Kit for Raspberry Pi Pico (Pico Included) is a great way to learn...

SKU: LB-LS6232 | Brand: Little Bird

For better audio quality when playing music, consider using a USB audio card with your Raspberry Pi. This upgrade can greatly enhance sound quality and volume since the on-board audio is produced through a minimally f...

SKU: KI-5647 | Brand: Kitronik

The Prong Soil Moisture Sensor mounts directly onto a BBC micro:bit to monitor soil moisture levels. Two conductive tines are inserted into the soil — any moisture conducts an analogue voltage that the micro:bit reads...

SKU: LB-LR0289 | Brand: Little Bird

With the passive buzzer you can control the volume by PWM. A passive buzzer requires an AC signal to make a sound. It is like an electromagnetic speaker, where a changing input signal produces the sound, rather than...

SKU: LB-LS2299 | Brand: Little Bird

A UV detection sensor module that measures ultraviolet light intensity in the 200–370 nm wavelength range. The analogue output (0–1 V DC) is proportional to the UV Index, making it suitable for measuring UV exposure i...

SKU: EF-EF08197 | Brand: ElecFreaks

The ElecFreaks Smart Home Kit is a micro:bit project kit for building interactive smart home models. It includes sensors, actuators, and cardboard building materials to create miniature scenes — a windowsill, wardrobe...

SKU: LB-LR0065 | Brand: Little Bird

The KnockOffDuino MEGA is a budget-friendly, fully Arduino MEGA 2560 R3-compatible development board. It features the same ATmega2560 microcontroller, pinout, and form factor as the original, making it a cost-effectiv...

SKU: WS-20167 | Brand: Waveshare

Features At A Glance The Pico-Audio is an audio expansion module designed for Raspberry Pi Pico, which incorporates PCM5101A low power stereo decoder, and uses I2S bus for transmitting audio signal. It supports wi...

SKU: AF-2130 | Brand: Adafruit

The Adafruit Mono 2.5W Class D Audio Amplifier delivers powerful sound from a tiny package. Based on the PAM8302 chip, it drives 4–8 ohm speakers at up to 2.5 W with over 90% efficiency — making it ideal for portable ...

SKU: SF-DEV-15845 | Brand: SparkFun

This is the Teensy Audio Adapter Board that can be added to a Teensy 4.0 for your next audio project. The shield provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Tee...

SKU: EC-ASA46530A | Brand: Elecrow

DFPlayer Mini is a compact and inexpensive MP3 module that can be connected directly to the speaker. Module can be used alone with battery power supply, speaker and keypad, or through the serial port control, as the A...

SKU: DF-DFR0675-EN | Brand: DFRobot

This is a small size and cost-effective Bluetooth 5.0 digital amplifier module with a volume adjustment function. It can connect to two speakers and match a wide variety of high-power speakers (40W-200W). This boar...

SKU: AF-356 | Brand: Adafruit

These are our favorite trim pots, perfect for breadboarding and prototyping. They have a long grippy adjustment knob and with 0.1" spacing, they plug into breadboards or perfboards with ease. This is the same pot t...