Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Square Force-Sensitive Resistor (FSR) [Interlink 406]
SKU: AF-1075 | Brand: Adafruit
A force-sensitive resistor (FSR) that changes its resistance based on how much pressure is applied. This Interlink 406 model features a 38 mm square sensing region, making it useful for detecting physical pressure, sq...
Delivered by Tue 23 Jun
Adafruit LED Sequins - Pack of 5 - Royal Blue
SKU: AF-1757 | Brand: Adafruit
Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...
Delivered by Tue 23 Jun
Gravity: Non-contact IR Temeperature Sensor For Arduino
SKU: DF-SEN0206 | Brand: DFRobot
INTRODUCTION We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object and the se...
Delivered by Thu 2 Jul
Circuit Playground Express [Developer Edition]
SKU: AF-3333 | Brand: Adafruit
The Circuit Playground Express is an all-in-one development board packed with sensors, LEDs, and a speaker — all on a round, beginner-friendly PCB with alligator-clip pads. No soldering required. It supports four prog...
Delivered by Tue 23 Jun
Gravity: 2-Channel I2C DAC Module (0-10V)
SKU: DF-DFR0971 | Brand: DFRobot
This 2-Channel I2C DAC module can output a voltage of 0-10V, which is a standard driver in industrial applications. It can be widely used with most 0-10V devices on markets such as light controllers, inverters, valves...
Delivered by Thu 2 Jul
Conductive Rubber Sheet / Stretch Sensor- 200mm x 200mm x 1mm
SKU: AF-5463 | Brand: Adafruit
This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...
Delivered by Tue 23 Jun
SparkFun Qwiic micro:bit Breakout (with Headers)
SKU: SF-BOB-16446 | Brand: SparkFun
The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and...
Delivered by Thu 2 Jul
Mini Load Cell - 100g, Straight Bar (TAL221)
SKU: SF-SEN-14727 | Brand: SparkFun
This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 100g of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that cha...
Delivered by Tue 23 Jun
Mini Oval Speaker - 8 Ohm 1 Watt
SKU: AF-3923 | Brand: Adafruit
Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like this speaker as it is small and comes with nice skinny wires w...
Delivered by Mon 13 Jul
Adafruit Feather M0 Adalogger
SKU: AF-2796 | Brand: Adafruit
The Feather M0 Adalogger is an all-in-one datalogger built around the ATSAMD21G18 ARM Cortex M0 processor, with a built-in MicroSD card holder, native USB, and LiPo battery charging. With 256KB of flash and 32KB of RA...
Delivered by Tue 23 Jun
Force Sensitive Resistor 0.5
SKU: SF-SEN-09375 | Brand: SparkFun
This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the ...
Delivered by Tue 23 Jun
Adafruit STEMMA Piezo Driver Amp - PAM8904
SKU: AF-5791 | Brand: Adafruit
The Adafruit STEMMA Piezo Driver Amp uses the PAM8904 switched-capacitor driver to amplify signals for piezo elements at up to 300 kHz. With bridge-tied load (BTL) output and up to 3× voltage multiplication, it can de...
Delivered by Mon 13 Jul
Gravity: IO Shield for FireBeetle M0 and ESP32-E
SKU: DF-DFR0762 | Brand: DFRobot
Specially designed for FireBeetle 2 series (M0, ESP32-E), this Gravity IO expansion shield offers various ports including digital, analog, I2C, UART, SPI, etc. Also, it comes with power input socket for connecting ext...
Delivered by Tue 23 Jun
Adafruit MCP4728 Quad DAC with EEPROM - STEMMA QT / Qwiic
SKU: AF-4470 | Brand: Adafruit
The Adafruit MCP4728 Quad DAC with EEPROM provides four independent 12-bit digital-to-analogue converters in a single I2C package. Set precise output voltages for your project, and save your settings to the built-in E...
Delivered by Mon 13 Jul
LM35DZ
SKU: LB-LR0285 | Brand: Little Bird
Feature: 0.5°C Ensured Accuracy (+25°C) Suitable for Remote Applications Low Cost Due to Wafer-Level Trimming Operates from 4 to 30 V Less than 60-μA Current Drain Low Self-Heating, 0.08°C in Still Air Low Impedance O...
Delivered by Tue 23 Jun
Mini Photocell
SKU: SF-SEN-09088 | Brand: SparkFun
This is a very small light sensor. A photocell changes (also called a photodetector, photo resistor, CdS or photoconductive cell) resistance depending on the amount of light it is exposed to. These little sensors make...
Delivered by Tue 23 Jun
Photo cell (CdS photoresistor)
SKU: AF-161 | Brand: Adafruit
CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...
Delivered by Tue 23 Jun
Adafruit LED Sequins - Multicolor Pack of 5
SKU: AF-3377 | Brand: Adafruit
Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...
Delivered by Tue 23 Jun
SparkFun Single Lead Heart Rate Monitor - AD8232
SKU: SF-SEN-12650 | Brand: SparkFun
The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as a...
Delivered by Tue 23 Jun
Panel Mount 10K Dual Linear Potentiometer w/ On-Off Switch [10K Dual Linear w/ Switch]
SKU: AF-3393 | Brand: Adafruit
A dual-ganged 10K linear potentiometer with a built-in on/off switch — two components in one convenient panel-mount package. The dual 10 kΩ linear-taper pots share a grippy shaft that turns smoothly without shifting o...
Delivered by Tue 23 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
