Arduino
Official Arduino boards, shields, kits, and compatible accessories. The open-source platform that started the maker movement. Uno, Mega, Nano, and more.
IR Receiver Diode - TSOP38238
SKU: SF-SEN-10266 | Brand: SparkFun
Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes. The...
Delivered by Thu 30 Jul
Pro Micro - 5V/16MHz
SKU: SF-DEV-12640 | Brand: SparkFun
Here at SparkFun, we refuse to leave ‘good enough’ alone. That’s why we’re adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on ...
Delivered by Thu 30 Jul
FTDI Cable 5V
SKU: SF-DEV-09718 | Brand: SparkFun
The FTDI Cable is a USB-to-Serial (TTL level) converter that provides a simple way to connect TTL interface devices to USB. Built around the FTDI FT232RQ chip housed in the USB-A connector, this cable operates at 5V l...
Delivered by Thu 30 Jul
Force Sensitive Resistor 0.5
SKU: SF-SEN-09375 | Brand: SparkFun
This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the ...
Delivered by Thu 30 Jul
4 channel 5V relay module with light coupling 5V
SKU: LB-LR0051 | Brand: Little Bird
A 4-channel relay module with opto-isolated inputs for safe, reliable switching of high-power loads. Each relay is rated for up to 10A at 250VAC or 30VDC, making it suitable for controlling lights, motors, heaters, an...
Delivered by Thu 30 Jul
Half-size Permanent Solder Breadboard PCB
SKU: LB-LS7240-H | Brand: Little Bird
Introducing the perfect solution for prototyping - our Half-size Permanent Solder Breadboard PCB! With this board, you can easily transfer your circuit from a solderless breadboard to a more permanent solution wi...
Delivered by Thu 30 Jul
Grove Cable Pigtail - 2mm pitch 100mm long
SKU: AF-5244 | Brand: Adafruit
A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch),...
Delivered by Thu 30 Jul
Gravity: IO Shield for FireBeetle M0 and ESP32-E
SKU: DF-DFR0762 | Brand: DFRobot
Specially designed for FireBeetle 2 series (M0, ESP32-E), this Gravity IO expansion shield offers various ports including digital, analog, I2C, UART, SPI, etc. Also, it comes with power input socket for connecting ext...
Delivered by Thu 30 Jul
2.5mm Pitch 2-pin Cable Matching Pair - JST XH compatible
SKU: AF-4872 | Brand: Adafruit
A matching pair of 2-pin JST XH-compatible cables — one with an inline plug and one with an inline socket — for easy connect-and-disconnect wiring. The 2.5mm pitch connectors friction-lock together for a secure, relia...
Delivered by Thu 30 Jul
Arduino CNC Shield V3.51 - GRBL v0.9 compatible - Uses Pololu Drivers
SKU: EC-CDP03051C | Brand: Elecrow
The Arduino CNC Shield V3.51 by Protoneer turns an Arduino Uno into a 4-axis CNC controller. Compatible with GRBL 0.9 firmware, it accepts Pololu-style stepper drivers (sold separately) and supports up to 4 stepper mo...
Delivered by Thu 30 Jul
Crowduino Nano V3.1 (Arduino Compatible)
SKU: EC-MCA03328A | Brand: Elecrow
The Crowduino Nano V3.1 is a compact, breadboard-friendly development board based on the ATmega328, fully compatible with the Arduino Nano 3.0 and its shields. It features a Mini-B USB port for programming and serial ...
Delivered by Thu 30 Jul
Gravity: Digital 1-to-8 I2C Multiplexer
SKU: DF-DFR0576 | Brand: DFRobot
The Gravity I2C Multiplexer solves address conflicts when you need to connect multiple I²C devices that share the same fixed address. It provides eight independent I²C ports on a single bus, allowing up to eight ident...
Delivered by Thu 30 Jul
SparkFun RedBoard Qwiic
SKU: SF-DEV-15123 | Brand: SparkFun
The SparkFun RedBoard Qwiic is an Arduino-compatible development board in the UNO R3 form factor with a built-in Qwiic connector for solderless I2C hookup. It programs over USB Micro-B using the Arduino IDE — select "...
Delivered by Thu 30 Jul
High Speed Optoisolator - 6N137
SKU: SF-COM-15105 | Brand: SparkFun
This diode-transistor photocouplers consist of an LED, optically coupled to a high speed photodetector to transmit electrical signals between circuits while still isolating your system from higher voltages. The 6N137 ...
Delivered by Thu 30 Jul
Nano Expansion Prototype Shield v3.0
SKU: LB-LS0866 | Brand: Little Bird
This Nano Multi-Function expansion board is designed especially for Arduino Nano Lead out all digital IO port and analogue IO port, each one with standard positive and negative power interface. Lead out the I2C i...
Delivered by Thu 30 Jul
Assembled Adafruit HUZZAH32 – ESP32 Feather Board - with Stacking Headers
SKU: AF-3619 | Brand: Adafruit
Aww yeah, it's the Feather you have been waiting for, and now with stacking headers! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: bui...
Delivered by Thu 30 Jul
Gravity: IO Expansion Motor Driver Shield
SKU: DF-DFR0502 | Brand: DFRobot
Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped with Gravity sensor interface and...
Delivered by Thu 30 Jul
Rotary Encoder
SKU: SF-COM-09117 | Brand: SparkFun
This is a 12-step rotary encoder with a nice ‘clicking’ feel. It’s breadboard friendly, and has a pretty handy select switch (by pushing in on the knob). The encoder is different from a potentiometer in that an enc...
Delivered by Thu 30 Jul
Gravity: Digital 5A Relay Module For Arduino
SKU: DF-DFR0017 | Brand: DFRobot
The DFRobot Relay Module is a standard relay used with a controller board to interface external electrical circuits or modules. Some of the most common applications with Arduino are: Home lighting, electrical appli...
Delivered by Thu 30 Jul
Gravity: Digital Push Button (Red)
SKU: DF-DFR0029-R | Brand: DFRobot
Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of b...
Delivered by Thu 30 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
