Arduino Shields

SKU: EC-MCS01005S | Brand: Elecrow

This Arduino Nano IO Shield can easy support Nano and Pro. Because the Arduino Nano and Pro is too small to connect to jumper wires or breadboard. So this Nano IO Shield is born. The shield has lead out all IOs of ...

SKU: EC-ACS01422S | Brand: Elecrow

This mega sensor shield v2.0 allows you to hoop up the sensors directly to Arduino mega(1280) or Arduino mega (2560) or Arduino mega(ADK) without the use of the breadboard. it also expand the mega with Bluetooth mo...

SKU: DF-DFR0572 | Brand: DFRobot

NB-IoT (Narrow Band-Internet of Things) technology is a new IoT technical branch and supports cellular data network connection of low power consumption device in WAN (Wide Area Network), which also called as LPWAN....

SKU: AF-1788 | Brand: Adafruit

The Adafruit Music Maker MP3 Shield with 3W Stereo Amp turns any Arduino into a powerful audio player, recorder, and MIDI synthesiser — with built-in amplification for driving speakers directly. Powered by the VS1053B...

SKU: FT-RX433 | Brand: Freetronics

315MHz and 433MHz wireless connections are very commonly used by consumer electronics including weather stations, home automation remote controls, power consumption meters, car alarms, and also many DIY projects...

SKU: PL-2515 | Brand: Pololu

The Pololu Dual G2 High-Power Motor Driver 18v18 Shield uses pairs of discrete MOSFET H-bridges to drive two large brushed DC motors. It has an Arduino shield form factor for direct plug-in use, and also breaks out al...

SKU: TB-XC4472 | Brand: Little Bird

This versatile motor and servo controller shield for Arduino drives up to 4 bidirectional DC motors or 2 stepper motors, plus 2 servos — all from a single board. The 4 onboard H-bridges provide 0.6A per channel (1.2A ...

SKU: TB-XC4488 | Brand: Little Bird

This MOSFET driver module lets you control high-power 24V DC loads from an Arduino or other 3.3V/5V microcontroller. It accepts PWM input for variable speed or brightness control, making it ideal for driving DC motors...

SKU: EC-ACS33721L | Brand: Elecrow

You may need this item if you want to power your Arduino with a 3.7V LiPo battery to make it become a portable device. It made up of a “power cell” and “fuel gauge”, it allows you to connect a 3.7V single cell Lithium...

SKU: PI-TSX00003 | Brand: Pimoroni

The MKR Relay Protoshield allows you to easily add relays to your MKR board based project. The shield provides two relays called RELAY1 and RELAY2 commanded by pin 1 and pin 2 r...

SKU: AF-772 | Brand: Adafruit

This new Adafruit shield makes it easy to use a 16x2 Character LCD. We really like the Blue & White 16x2 LCDs we stock in the shop. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LC...

SKU: AF-789 | Brand: Adafruit

The Adafruit PN532 NFC/RFID Controller Shield brings 13.56 MHz NFC and RFID capabilities to your Arduino. Built around the PN532 chipset — the most widely used NFC controller, found in virtually every NFC-enabled phon...

SKU: EC-AS0008EL | Brand: Elecrow

An Arduino-compatible shield for controlling up to 8 channels of EL (electroluminescent) wire or tape. Each channel uses opto-isolated, zero-crossing control for safe and reliable switching. Control EL wire as simply ...

SKU: SF-DEV-16789 | Brand: SparkFun

The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND, 3.3V, SDA and SCL) o...

SKU: YH-6000100213 | Brand: Little Bird

An I/O expansion shield for the Arduino UNO R3 that breaks out every pin with its own VCC and GND, making it simple to connect multiple sensors and modules simultaneously. Stacks directly on top of the UNO with both f...

SKU: YH-6000300700 | Brand: Little Bird

The Yahboom Uno Sensor Expansion Board is designed to simplify connecting sensors and modules to your Arduino Uno. It plugs directly into the Uno's headers and breaks out all pins to convenient PH2.0 anti-reverse sock...

SKU: YH-6000300574 | Brand: Little Bird

This is exquisite workmanship, superior quality Uno R3 ProtoShield Expansion Board. It possess pin headers on both sides of the back that are fully compatible with Uno R3, can be plugged directly into the Uno R3 board...

SKU: EF-EF03007 | Brand: ElecFreaks

This 4-channel relay module allows you to control up to four independent circuits using a microcontroller such as Arduino, Raspberry Pi, or other MCU boards. Each relay channel has an LED indicator that shows the curr...

SKU: AF-4515 | Brand: Adafruit

The SparkFun Qwiic FeatherWing (Shield for Thing Plus) provides an easy-to-assemble way to add the STEMMA QT / Qwiic connect ecosystem to any development board with Feather/Thing Plus Footprint. It connects the I2C bu...

SKU: AF-4309 | Brand: Adafruit

The Grove Shield FeatherWing for Particle Mesh and all Feathers is an add-under for any Particle Mesh or Feather board, so that you can easily interface with Seeed's huge collection of Grove sensors. Now you can have ...