Arduino Shields

SKU: SF-DEV-19257 | Brand: SparkFun

An adapter board that adds a MatesBUS interface to any development board with a mikroBUS Click socket, allowing direct connection of TIMI display modules (such as the TIMI-96). Communication between the host and the c...

SKU: DF-DFR0578 | Brand: DFRobot

Gravity: I/O Expansion Shield for OpenMV Cam H7 & H7 Plus is an expansion shield specially designed for the OpenMV Cam H7 and OpenMV Cam H7 Plus. It is compatible with various sensors and electronic modules of Gravity...

SKU: DF-DFR0898 | Brand: DFRobot

The 10 I/Os PLC Module is an industrial programmable logic controller based on the Arduino Nano. It provides a simple, cost-effective, and open-source approach to industrial monitoring and control, with standardised P...

SKU: SF-DEV-17119 | Brand: SparkFun

The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teen...

SKU: EC-MCS01107S | Brand: Elecrow

The GPS Shield is based on the u-blox NEO-6M receiver module and plugs directly into Arduino UNO, Mega, and compatible boards. It provides GPS positioning data via a serial port connection (pins configurable to D0–D7)...

SKU: EC-ACS52001S | Brand: Elecrow

The W5200 Ethernet Shield adds wired internet connectivity to your Arduino. Simply stack it onto your board, connect an RJ45 cable, and start communicating over the network. The W5200 controller provides a 32 KB inter...

SKU: EC-AS54887CAN | Brand: Elecrow

The ELE CAN-Bus Shield V1.5 adds CAN-Bus communication capability to your Arduino. Built around the Microchip MCP2515 CAN controller and MCP2551 CAN transceiver, it supports CAN V2.0B at speeds up to 1 Mb/s with both ...

SKU: EC-AS402812NP | Brand: Elecrow

This is the NeoPixel Shield from Duinofun. This Arduino shield is equipped with 40 WS2812 RGB LEDs arranged in an 5x8 matrix with on one pin (Digital #6) needed to control them all.Each shield is powered by the 5V onb...

SKU: EC-ACS17101S | Brand: Elecrow

This WiFi Shield connects your Arduino or Crowduino to the internet wirelessly. Just connect it to your wireless network with a few simple instructions, you can start to control your applications through the internet ...

SKU: EC-CCH01085C | Brand: Elecrow

A 8-pin female header, with extra long legs -- great for stacking Arduino Shields.And if you want 10- pin one, you can change the custom option,Specification Pin Pitch: 2.54mm Contact Length: 12mm Total length: 23.5mm...

SKU: EC-ACS53201S | Brand: Elecrow

NFC(Near Field Communication) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity , it builds upon...

SKU: EC-SER04013B | Brand: Elecrow

This expansion board is the core controller for a dual-wheel self-balancing robot, designed to plug directly onto an Arduino UNO. It consolidates motor driving, gyroscope, ultrasound, and wireless connectivity interfa...

SKU: EC-ARS04053S | Brand: Elecrow

The SIM5360E series is Dual-Band HSPA+/WCDMA and Quad-Band GSM/GPRS/EDGE module solution in a SMT type which supports HSPA+ up to 14.4Mbps for downlink data transfer.supports 3G network and combines GPS technology for...

SKU: SF-DEV-16789 | Brand: SparkFun

The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND, 3.3V, SDA and SCL) o...

SKU: SF-DEV-16790 | Brand: SparkFun

The SparkFun Qwiic Shield for Thing Plus adds four Qwiic connectors (two horizontal, two vertical) to any Thing Plus or Adafruit Feather-format development board. It breaks out the I²C bus (GND, 3.3 V, SDA, SCL) to st...

SKU: EF-EF02037 | Brand: ElecFreaks

CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BU...

SKU: AF-4285 | Brand: Adafruit

Give your Arduino project WiFi connectivity with the Adafruit AirLift Shield. This shield uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main...

SKU: DF-DFR0513 | Brand: DFRobot

This motor driver module is a special PPM signal motor controller for Aero modelling remote control. It is designed by DFRobot and it can be controlled by RC transmitter. The driver can convert PPM signal to t...

SKU: DF-DFR0498 | Brand: DFRobot

DFRobot FireBeetle series are low power consumption development modules designed for Internet of Things (IoT). The FireBeetle Covers-Camera & Audio Media Board is a multimedia device for IoT that provides interfac...

SKU: SF-DEV-13820 | Brand: SparkFun

The SparkFun ProtoShield Kit lets you customize your own Arduino shield using whatever circuit you can come up with and then test it to make sure everything is working the way it should! The SparkFun ProtoShield Kit i...