Arduino Sensors

SKU: AF-2167 | Brand: Adafruit

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to tha...

SKU: EF-EF04055 | Brand: ElecFreaks

OCTOPUS PIR Sensor module is a type of electronic building block based on AM412 pyroelectric digital smart sensor. It can be used in sensing and detection of human or animal motion, sensing distance is about 4-5 me...

SKU: AF-158 | Brand: Adafruit

Hall effect sensors detect whether a magnet is near. Useful for non-contact/waterproof type switches, position sensors, rotary/shaft encoders. I tried dozens of different hall effect sensors to see which one wou...

SKU: AF-2384 | Brand: Adafruit

The "poor man's" accelerometer/motion sensor! These spring-vibration switches are medium sensitivity non-directional vibration induced trigger switches. Inside is a medium hardness spring coiled around a long metal...

SKU: AF-157 | Brand: Adafruit

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to...

SKU: AF-2168 | Brand: Adafruit

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that s...

SKU: AF-4666 | Brand: Adafruit

A compact passive infrared (PIR) motion sensor that detects movement from approximately 3–8 metres away. Much smaller than standard PIR modules, making it ideal for unobtrusive, space-constrained projects. Fully self-...

SKU: AF-3845 | Brand: Adafruit

This 3×4 matrix keypad provides 12 buttons (0–9, *, #) in a sturdy, rigid format. It uses a matrix scanning arrangement requiring only 7 pins to read all 12 keys, making it efficient to connect to Arduino, Raspberry P...

SKU: DF-DFR1129 | Brand: DFRobot

##Introduction The Gravity: Photo Interrupter Module integrates a high-performance ITR9608 photoelectric switch. Its compact design and easy operation make it an ideal choice for electronic projects and applications. ...

SKU: SF-SEN-28798 | Brand: SparkFun

  This is the HC-SR04 ultrasonic distance sensor, now in Red! This economical sensor offers non-contact measurement functionality ranging from 2cm to 400cm, with a ranging accuracy of up to 3mm. Each HC-SR04 ...

SKU: DF-SEN0481 | Brand: DFRobot

This magnetic switch (reed switch) consists of two magnetic reeds (usually composed of iron and nickel) sealed in a plastic case. The two magnetic reeds are overlapped but there is a small gap between them. When a sui...

SKU: AF-3397 | Brand: Adafruit

The Optomax is an optical liquid level sensor that detects the presence or absence of almost any liquid — oil or water based. Inside the polysulfone housing, an infrared LED and matching phototransistor work together:...

SKU: AF-3846 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: AF-642 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...