Arduino Sensors

SKU: LB-LS1177 | Brand: Little Bird

Laser Detector Module Want to set up your own laser tripwire? These little modules make it super simple. Just hook one up to your Arduino, line it up with a laser pointer, and you’ve got a working laser detection syst...

SKU: DF-SEN0540 | Brand: DFRobot

The Gravity LTR390-UV sensor provides both ambient light and UV sensing with a UV spectral response from 280nm to 430nm. It features high sensitivity, quick response, and strong anti-interference performance. With a ...

SKU: DF-SEN0395 | Brand: DFRobot

This 24GHz millimeter-wave radar sensor employs FMCW, CW multi-mode modulation, and separate transmitter and receiver antenna structure.In working, the sensor first emits FMCW and CW radio waves to the sensing area. N...

SKU: LB-24-THERMISTOR | Brand: Little Bird

A thermistor changes its resistance with temperature. Find our tutorial here A thermistor is a type of variable resistor whose resistance changes with temperature. Let's take a closer look at the thermistor module....

SKU: DF-SEN0130 | Brand: DFRobot

The Gravity MQ5 gas sensor is highly sensitive to LPG, natural gas, and town gas, with lower sensitivity to alcohol, cooking fumes, and cigarette smoke. The analogue output is proportional to gas concentration, and se...

SKU: PL-136 | Brand: Pololu

The Sharp GP2Y0A21YK0F is an infrared distance sensor that outputs an analogue voltage corresponding to the distance of the nearest object within its 10–80 cm detection range. Using IR triangulation, it provides relia...

SKU: DF-SEN0537 | Brand: DFRobot

The ENS160 Air Quality Sensor uses ScioSense's ENS160 chip with TrueVOC and metal oxide (MOX) technology to monitor indoor air quality. It outputs TVOC (total volatile organic compounds), eCO2 (equivalent CO2), and AQ...

SKU: EF-EF04079 | Brand: ElecFreaks

Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need an...

SKU: DF-SEN0097 | Brand: DFRobot

This is a BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations. This is a more acurate and easier ...

SKU: DF-SEN0132 | Brand: DFRobot

INTRODUCTION This is an Arduino Carbon Monoxide Sensor. It uses MQ7 probe to detect Carbon Monoxide (CO) concentrations in the air from 20 to 2000ppm. The sensitivity ca...

SKU: DF-SEN0138-R | Brand: DFRobot

A miniature snap-action switch, also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.Micro switches are very widely used; among their appl...

SKU: DF-SEN0177 | Brand: DFRobot

The Gravity Laser PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter concentrations in the air. It detects particles from 0.3 to 10 µm in diameter and outputs digital concentration ...

SKU: DF-SEN0545 | Brand: DFRobot

This smart rain sensor offers a fast way to detect rainfall change on glass in real-time free from effects like sunlight, dust, leaves, etc., and feeds back information (no rain, light rain, moderate rain, or heavy ra...

SKU: DF-SEN0481 | Brand: DFRobot

This magnetic switch (reed switch) consists of two magnetic reeds (usually composed of iron and nickel) sealed in a plastic case. The two magnetic reeds are overlapped but there is a small gap between them. When a sui...

SKU: DF-SEN0507 | Brand: DFRobot

Different from our previous liquid level sensors, this capacitive liquid sensor can be used to detect high-viscosity and low-corrosive liquids, such as glue, lubricating oil, grease, ink, engine oil, powder and other ...

SKU: AF-3397 | Brand: Adafruit

The Optomax is an optical liquid level sensor that detects the presence or absence of almost any liquid — oil or water based. Inside the polysulfone housing, an infrared LED and matching phototransistor work together:...

SKU: DF-DFR0830 | Brand: DFRobot

This sensor contains a metal ball that moves along its special internal structure on the effect of gravitation force so as to make a connection or disconnection. Therefore, it can be used as a simple tilt switch. With...

SKU: DF-SEN0386 | Brand: DFRobot

A high-precision serial 6-axis accelerometer and gyroscope module with a built-in microprocessor, Kalman filter algorithm, and attitude solver. Outputs real-time roll, pitch, and yaw angles with a static accuracy of 0...

SKU: EF-EF04014 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various d...

SKU: DF-SEN0005 | Brand: DFRobot

This low cost SFR02 ultrasonic ranger has both I2C and Serial interfaces. New AutoTune algorithms intelligently back the minimum range right up to the transducer ringdown for the very best performance possible, aut...