Arduino Sensors

SKU: DF-SEN0648 | Brand: DFRobot

The TOFSense F2P is a professional-grade laser distance sensor using dTOF (Direct Time-of-Flight) technology. With 50m range, ±3cm accuracy, and 100Hz refresh rate, it's engineered for drones, traffic monitoring, indu...

SKU: AF-6420 | Brand: Adafruit

The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m...

SKU: DF-SEN0602 | Brand: DFRobot

##Introduction This RS485 soil temperature, humidity, and pH sensor supports a broad voltage power supply range (5-30V) and communicates data through the reliable MODBUS-RTU protocol, allowing for seamless integration...

SKU: DF-SEN0626 | Brand: DFRobot

##Introduction The AI Visual Gesture and Face Tracking Sensor is a high-performance, offline AI recognition module designed for non-contact interaction. With advanced facial tracking and gesture recognition capabiliti...

SKU: AF-6067 | Brand: Adafruit

The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...

SKU: DF-SEN0481 | Brand: DFRobot

This magnetic switch (reed switch) consists of two magnetic reeds (usually composed of iron and nickel) sealed in a plastic case. The two magnetic reeds are overlapped but there is a small gap between them. When a sui...

SKU: AF-3397 | Brand: Adafruit

The Optomax is an optical liquid level sensor that detects the presence or absence of almost any liquid — oil or water based. Inside the polysulfone housing, an infrared LED and matching phototransistor work together:...

SKU: DF-DFR0830 | Brand: DFRobot

This sensor contains a metal ball that moves along its special internal structure on the effect of gravitation force so as to make a connection or disconnection. Therefore, it can be used as a simple tilt switch. With...

SKU: SF-SEN-17052 | Brand: SparkFun

The MQ-136 is a Hydrogen Sulfide detection sensor with a sensing range of 1 - 200ppm. The sensing element is SnO2, which has lower conductivity in clean air. When H₂S gas exists, the sensor’s conductivity gets higher ...

SKU: EF-EF04014 | Brand: ElecFreaks

Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various d...

SKU: AF-3846 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: DF-SEN0005 | Brand: DFRobot

This low cost SFR02 ultrasonic ranger has both I2C and Serial interfaces. New AutoTune algorithms intelligently back the minimum range right up to the transducer ringdown for the very best performance possible, aut...

SKU: AF-466 | Brand: Adafruit

The VCNL4010 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. For longer distances (in the range of cm, you can use a SHARP IR distance sensor, but those are only good ...

SKU: DF-SEN0131 | Brand: DFRobot

INTRODUCTION This is an Arduino Propane Gas Sensor. It uses MQ6 probe to detect iso-butane, propane and liquefied petroleum gas (LPG). It is less sensitive with alcohol, cooking fumes an...

SKU: DF-SEN0135 | Brand: DFRobot

The HRLV-MaxSonar-EZ (MB1013) is a high-resolution ultrasonic distance sensor with 1 mm resolution and a range of up to 5 metres. It features multiple output formats, internal temperature compensation, virtually no de...

SKU: SF-COM-08348 | Brand: SparkFun

The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light ...

SKU: AF-642 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: DF-SEN0202 | Brand: DFRobot

The DFRobot 3D Gesture Sensor (Mini) integrates 3D gesture recognition and motion tracking using Microchip's patented GestIC near-field sensing technology. It can detect clockwise and counterclockwise rotation, direct...

SKU: SF-SEN-09602 | Brand: SparkFun

The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10µA at o...

SKU: DF-SEN0221 | Brand: DFRobot

The Hall Angle Sensor is a miniature 360 degree sensor which works based on the principle of the Hall effect. It is compatible with the DFRobot Gravity sensor interface, and works with a 5V DC power supply. The ...