All Products

SKU: LB-PT7011 | Brand: Little Bird

Specification: Product Name:DC Geared Motor Product Model: N20 Product Material: metal Main colour: silver tone Length: approx.36mm Rated Voltage:DC 12V Output Speed:200RPM Shaft Size:3 x 10mm/ 0.12" x 0.4"(D*L) Produ...

SKU: AF-1260 | Brand: Adafruit

What's a wearable project without LEDs? Our favorite part of the Flora platform is these tiny smart pixels. Designed specifically for wearables, these updated Flora NeoPixels have ultra-cool technology: these ul...

SKU: LB-LR0335-LB | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant light blue when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow s...

SKU: PI-COM0404 | Brand: Pimoroni

A colourful 30 mm arcade-style pushbutton in blue. With a satisfying 2 mm travel and tactile click, these buttons are ideal for arcade builds, control panels, and interactive projects. Key Features Arcade Style – C...

SKU: PI-CAM007 | Brand: Pimoroni

This camera cable adapter converts the smaller Raspberry Pi Zero camera ribbon cable to the standard full-size CSI connector used on Raspberry Pi models A, B, 2, 3, and 4. Connect the narrow end to your Pi Zero camera...

SKU: LB-BK-SPEAKER | Brand: Little Bird

A bulk pack of 20 breadboard-compatible speakers — a Little Bird exclusive. Each speaker comes with jumper wires and standard header pins pre-soldered, so it plugs directly into a breadboard with no extra wiring neede...

SKU: LB-LS0067 | Brand: Little Bird

The knob is designed to set directly on the potentiometer's ridges so it's an easy & secure fit. It has a nice feel, with a rubbery grip, tweaking it is quite fulfilling This is the orange version and it has a nice...

SKU: AF-3859 | Brand: Adafruit

A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with porta...

SKU: AF-1443 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in green LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired ...

SKU: AF-1444 | Brand: Adafruit

A 16mm illuminated pushbutton with a built-in yellow LED and latching on/off action. Press once to switch on, press again to switch off — ideal for power switches, mode selectors, and control panels. The LED is wired...

SKU: LB-LS0657 | Brand: Little Bird

A high-fidelity DAC expansion board for Raspberry Pi that delivers superior audio quality over the Pi's built-in 3.5mm output. Built around Texas Instruments' PCM5122 DAC chip, this board connects via the I2S interfac...

SKU: AF-3923 | Brand: Adafruit

Hear the good news! This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. We particularly like this speaker as it is small and comes with nice skinny wires w...

SKU: LB-LR0214-50 | Brand: Little Bird

The 42BYG is a NEMA 17 bipolar stepper motor with a shaft-reversed design, commonly used in 3D printers, CNC machines, and DIY motion-control projects. With a 1.8° step angle and 40 N·cm holding torque, it provides re...

SKU: LB-LR0400 | Brand: Little Bird

A 1kg straight bar load cell (strain gauge) that converts applied force into a measurable electrical signal. Made from aluminium alloy with four strain gauges in a Wheatstone bridge configuration, this sensor is ideal...

SKU: AF-1468 | Brand: Adafruit

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...

SKU: LB-LR0281-9 | Brand: Little Bird

The TrinityPixel WS2812B is a 5-metre waterproof RGB LED strip featuring 30 individually addressable LEDs per metre (150 total). Each LED can be set to any 24-bit colour (8-bit PWM per red, green, and blue channel), g...

SKU: DF-FIT0539 | Brand: DFRobot

A robust battery holder designed to house three 18650 lithium-ion cells in series, delivering a nominal 11.1V output through a standard DC 2.1mm power jack. Ideal for powering projects, robots, and portable electronic...

SKU: AF-3692 | Brand: Adafruit

What is this TRS bit? Turtle Rock Studios? Transmission Raman Spectroscopy? Not quite, more like Tip-Ring-Sleeve. This nifty, gold-plated connector is known by many names, phone plug, phone jack, headphone j...

SKU: TB-TS1620 | Brand: Little Bird

An entry-level temperature-controlled soldering station ideal for hobbyists and beginners. The lightweight iron features an anti-slip grip and comes with a tip-cleaning sponge, while the base unit provides analogue te...

SKU: LB-LR0240 | Brand: Little Bird

With the sound module, we can detect the presence of loud sounds. While this module has a microphone on it, our Arduino does not have the brains to interpret or record the audio directly (there are some shields you...