All Products

SKU: AF-454 | Brand: Adafruit

You will squeak with delight when you hold this adorable miniature LED 8x8 matrix. 0.8" square, it's got everything a big LED matrix has, but bite-sized! There are 16 pins on the side, 8 on each, with 0.1" spacing ...

SKU: PL-3215 | Brand: Pololu

A high-power 12V brushed DC gearmotor with a 20.4:1 metal spur gearbox and integrated 48 CPR quadrature encoder. The encoder on the motor shaft provides 979.62 counts per revolution of the gearbox output shaft, enabli...

SKU: AF-455 | Brand: Adafruit

A compact 8×8 red LED matrix (KWM-30881CVB) measuring 30.5 mm (1.2") per side. The ultra-bright red LEDs are arranged in a grid with 16 pins (8 per side) on standard 2.54 mm (0.1") pitch, allowing the display to plug ...

SKU: AF-458 | Brand: Adafruit

Make a scrolling sign, or a small video display with this 8x8 gridded bi-color LED matrix. Only 1.2" on a side, it is quite visible but not so large it wont plug into a breadboard! Every grid has two LEDs inside so...

SKU: AF-462 | Brand: Adafruit

Turn any Arduino into an AVR chip programmer with this shield kit. Designed for burning Arduino bootloaders onto blank ATmega328P chips, it can also be configured as a standalone AVR ISP programmer that works without ...

SKU: AF-460 | Brand: Adafruit

Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure. This is the 2-wire versi...

SKU: SF-COM-10800 | Brand: SparkFun

Who doesn’t love the soft glow of electroluminescence? This EL panel is a flexible plastic sheet which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like ...

SKU: AF-464 | Brand: Adafruit

The eTape Liquid Level Sensor is a solid-state resistive sensor that measures fluid level without mechanical floats. As the liquid level rises, the hydrostatic pressure compresses the sensor envelope, decreasing its r...

SKU: SF-COM-10798 | Brand: SparkFun

A flexible electroluminescent (EL) panel that emits a soft, neon-like blue glow when driven by an EL inverter. The 10 × 10 cm panel is thin and lightweight, making it ideal for backlighting, illuminated signage, costu...

SKU: TB-TD2022 | Brand: Little Bird

A quality set of 7 insulated screwdrivers in a storage case, GS and DVE tested and approved to 1000V. Featuring red handles with insulation right to the tip for safe, easy identification among your tools. Compliant wi...

SKU: SF-COM-10795 | Brand: SparkFun

Who doesn’t love the soft glow of electroluminescence? This EL tape is a flexible plastic ribbon which contains a phosphor layer and lights up with a neon-like glow when the proper voltage is applied. It’s a lot like ...

SKU: SF-KIT-13006 | Brand: SparkFun

This is the SparkFun Decade Resistance Box, an involved PTH soldering kit that allows you to quickly and accurately dial in a specific resistance value between 0 and 999,990 Ω, in 10 Ω increments. The concept is simpl...

SKU: AF-475 | Brand: Adafruit

This 30mm translucent green arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no ...

SKU: PL-1969 | Brand: Pololu

These 2×13-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable 26-wire conn...

SKU: SF-WRL-13002 | Brand: SparkFun

This ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length that is configurable from 20 cm to 88 cm long. Each ANT500 is constructed of stainless steel and features an SMA male...

SKU: AF-3270 | Brand: Adafruit

Adafruit offers fun and exciting stickers for achievement in electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a sticker is just one of the...

SKU: SF-CAB-10759 | Brand: SparkFun

Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it’s hard to get power to your Ethernet devices. Woul...

SKU: AF-477 | Brand: Adafruit

Show your support for the open-source hardware movement with this embroidered iron-on patch featuring the Open Source Hardware (OSHW) logo. Originally created for the 2011 Open Hardware Summit, this badge is a great w...

SKU: SF-SEN-10740 | Brand: SparkFun

An evaluation board for the MLX90614 non-contact infrared thermometer sensor. It pairs the MLX90614 with an ATmega328 running at 3.3 V (8 MHz Arduino bootloader), giving you a ready-to-use IR temperature sensor with s...

SKU: AF-484 | Brand: Adafruit

An embroidered skill badge celebrating the achievement of learning microcontrollers — from Arduino and Raspberry Pi to ARM, PIC, and beyond. A fun way to recognise and reward skill-building in classrooms, workshops, m...