All Products

SKU: SF-ROB-12350 | Brand: SparkFun

These plastic shaft spacers have an inner diameter of 1/4” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

SKU: DF-DFR0185-GY | Brand: DFRobot

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a very ...

SKU: DF-DFR0185-P | Brand: DFRobot

Electroluminescent (EL) wire is a thin, flexible, phosphor-coated wire that emits a bright, even glow when driven by a high-voltage AC source. This 3-metre length of purple EL wire is 3 mm in diameter, making it easy ...

SKU: SF-ROB-09347 | Brand: SparkFun

Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-p...

SKU: DF-DFR0185-NG | Brand: DFRobot

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a ver...

SKU: SF-BOB-09322 | Brand: SparkFun

A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate, photodiode, or phototransistor). This PCB has three connections for PWR, GND, and Signal.When the gate is clear, SIG will be high (>...

SKU: DF-DFR0185-R | Brand: DFRobot

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a very ...

SKU: SF-DEV-14285 | Brand: SparkFun

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield i...

SKU: DF-DFR0185-HP | Brand: DFRobot

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a very ...

SKU: DF-DFR0185-O | Brand: DFRobot

Electroluminescent (EL) wire is a thin, flexible, phosphor-coated wire that glows when a high AC voltage is applied. This 1-metre length of orange EL wire is perfect for adding a vibrant neon-style glow to costumes, p...

SKU: DF-DFR0185-B | Brand: DFRobot

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a ver...

SKU: DF-DFR0185-GB | Brand: DFRobot

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a ver...

SKU: DF-FIT0187 | Brand: DFRobot

This rubber ring is used to afix ultrasonic sensor. It fits URM37 V4.0 Ultrasonic Sensor For Arduino / Raspberry Pi and URM04 Ultrasonic Sensor (RS485). NOTE: Other ultrasonic sensor may fit, you have to check...

SKU: SF-ROB-12316 | Brand: SparkFun

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 30:1 and operate up to 12 volts and have a stall torque of 9 oz-in. and a max speed of 900 RPM. Each micro gearmot...

SKU: DF-FIT0084-R | Brand: DFRobot

A pack of 10 red straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female headers,...

SKU: DF-FIT0036 | Brand: DFRobot

This is a high quality plastic servo horn. It fits DF series servos. Made specifically for DF series servos. SPECIFICATIONS Outside diameter: 20mm(0.79") Center hole diameter: 3mm(0.12") Moun...

SKU: DF-FIT0084-B | Brand: DFRobot

A pack of 10 blue straight male pin header strips, each with 40 pins at standard 2.54 mm (0.1") spacing. These single-row headers are compatible with solderless breadboards, perforated prototyping PCBs, female headers...

SKU: SF-WRL-09232 | Brand: SparkFun

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an ant...

SKU: SF-WRL-09233 | Brand: SparkFun

The SMA Male to RP-SMA Male Adapter converts between SMA and RP-SMA connector types, making it easy to pair antennas and cables that use different threading configurations. One end features a standard SMA male connect...

SKU: AF-181 | Brand: Adafruit

Standard HD44780 LCDs are useful for creating standalone projects. 16 characters wide, 2 rows White text on blue background Connection port is 0.1" pitch, single row for easy breadboarding and wiring Pins are docu...