All Products

SKU: LB-24-MQ2 | Brand: Little Bird

This is the MQ-2 smoke sensor module. It is sensitive to flammable gases such as LPG, propane, and methane. Find our tutorial here It has four pins:AO: Analog OutputDO: Digital OutputGND: In electronics, we defi...

SKU: LB-PT-SERVO | Brand: Little Bird

A compact 9 g continuous rotation micro servo that spins 360° in either direction, rather than moving to a fixed position like a standard servo. Control it with any servo library, code, or hardware — just set the sign...

SKU: AF-4255 | Brand: Adafruit

Brass heat-set inserts provide strong, reusable threaded connections in 3D-printed and injection-moulded plastic parts. Each insert has a knurled outer surface that grips the surrounding plastic when pressed in with a...

SKU: AF-3955 | Brand: Adafruit

This 200 mm cable converts a JST PH 4-pin connector into four individual wires with 0.1″ (2.54 mm) male header pins on the end. It's designed for connecting STEMMA and Grove I²C boards to breadboards, socket headers, ...

SKU: AF-1189 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a  16mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does,...

SKU: AF-1185 | Brand: Adafruit

OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, how...

SKU: LB-LR0045 | Brand: Little Bird

Easily add SD card read/write capabilities to your Arduino projects with this SD card interface module. Designed for simple integration, this module breaks out the standard SD card slot and allows your Arduino to rea...

SKU: DF-FIT0533 | Brand: DFRobot

micro:bit LEGO enclosure is a protective case for micro:bit. It is specially designed by DFRobot, made by ABS material. It reserves A-B buttons and microLbit RST button, provides comprehensive protection. The enclo...

SKU: LB-ETEXTILELED-R | Brand: Little Bird

This is a simple single unit RED E-Textile LEDEach unit can be sewn into fabric. Various input, output, power and sensor boards are available. They’re even washable (with special care)!These are a thicker PCB tha...

SKU: LB-LR0296 | Brand: Little Bird

A 9V battery clip adapter with a standard 5.5 × 2.1 mm centre-positive barrel jack. Use it to power any device that accepts 9V input through an onboard barrel jack connector. Key Features 9V Battery Snap – Standard...

SKU: LB-LR0298 | Brand: Little Bird

This stand alone DHT11 can read the temperature and humidity and send the information over a one wire, simplex serial bus. Arduino.cc provides a DHT11 library to aid in communicating with this module.**DHT11 Temper...

SKU: DF-DFR0229 | Brand: DFRobot

This is a Micro SD(TF) module from DFRobot. It is compatible with TF SD card (commonly used in Mobile Phone) which is the most tiny card in the market. SD module has various applications such as data logger, au...

SKU: AF-3006 | Brand: Adafruit

The Adafruit MAX98357A I2S Class D Amplifier Breakout is an all-in-one digital audio solution that decodes I2S audio and amplifies it directly to a speaker — no separate DAC required. Delivering up to 3.2W into a 4Ω s...

SKU: AF-373 | Brand: Adafruit

This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into breadboards or perfboar...

SKU: SF-PRT-10007 | Brand: SparkFun

A set of stackable headers designed for the Arduino Uno, Arduino Pro, and other boards using the classic (pre-R3) pin layout. These female headers sit tall enough to clear the USB-B connector, making them ideal for st...

SKU: DF-FIT0502 | Brand: DFRobot

INTRODUCTION FIT0502(Stereo Enclosed Speaker) is a new passive speaker with JST PH2.0 interface. It is a perfect option for any DIY audio project which requires an 8 ohm impedance and 3W power. The suitable size ...

SKU: EC-ASA46530A | Brand: Elecrow

DFPlayer Mini is a compact and inexpensive MP3 module that can be connected directly to the speaker. Module can be used alone with battery power supply, speaker and keypad, or through the serial port control, as the A...

SKU: LB-BK-356 | Brand: Little Bird

A 10-pack of 10 kΩ trim potentiometers, perfect for breadboarding and prototyping. They feature a long, grippy adjustment knob and 0.1″ pin spacing that plugs directly into breadboards or perfboards with ease. Specif...

SKU: AF-3253 | Brand: Adafruit

The Adafruit Raspberry Pi Camera Board Case is a compact two-piece polycarbonate enclosure that protects your Pi Camera while providing a 1/4" tripod mount on the back. Designed by Mike Doell, it snaps together withou...

SKU: SF-PRT-13925 | Brand: SparkFun

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield boa...